[Group] SBF Yamaha 125Z

[uma-man]

if @fx110 said no need, then maybe im wrong.. coz thats what im informed by mech (capit's ex mechanic,salleh).. need to down engine..

 

 

and not all bearing la must change.. but usually ppl will change coz you already open the engine, so why not change the wear and tear stuff..

[Tequila]

hmm thx for the info fx110.. but most shops tells me must, change that seal and bearings, that's the least u should do. unless u fussy2 wanna change pistons all etc.

[fx110]

hmm thx for the info fx110.. but most shops tells me must, change that seal and bearings, that's the least u should do. unless u fussy2 wanna change pistons all etc.

 

from what i know pass few years, same like bro @uma-man mentioned, for 125z really required overhaul(drop engine) to replace......

 

there are alot of "$$$ eater" nowadays.

i try check with u at my office(Sungei Kadut area) nearby shop, see what they say.

[rozaliq]

http://tapatalk.com/mu/cb74168a-d9bd-3693.jpg anibody intrested?? AHM full chamber sprintest exhaust for 125z

[afiq07]

hi guys. just wanna ask though how come my z speed difficult to go 120-140? like very heavy. what is wrong? the carb settings isit? thanks.

[HOLLA]

anyone wan to 1 to 1 exchange ur 125z with my x1 ?? my x1 thread - http://www.singaporebikes.com/forums/showthread.php/323701-All-Black-FY-Plate-YAMAHA-X1-For-Sale!!!

[Jack-steiger]

Hi guy wanna ask ur a bit stupid qnstion...lets say dunlop tt900 in sg n jb is there any different(in term of quality) coz i heard some my frenz say jb grade is lower than sg even through same model..so juz wanna check it out

[fx110]

anyone wan to 1 to 1 exchange ur 125z with my x1 ?? my x1 thread - http://www.singaporebikes.com/forums/showthread.php/323701-All-Black-FY-Plate-YAMAHA-X1-For-Sale!!!

thats worth for whose look for better FC

 

 

Hi guy wanna ask ur a bit stupid qnstion...lets say dunlop tt900 in sg n jb is there any different(in term of quality) coz i heard some my frenz say jb grade is lower than sg even through same model..so juz wanna check it out

 

depend bro, dunlop tt900 "low profile" is easy get in JB.

[Jack-steiger]

wad u mean by low profile ???? o.0 n if michelin vs dunlop which 1 better...don say battleX la coz price wise =]

[fx110]

wad u mean by low profile ???? o.0 n if michelin vs dunlop which 1 better...don say battleX la coz price wise =]

 

the "low profile" is come from Thailand,

but the “GP” had been told made in Japan

 

 

michelin vs dunlop

depends on which model you comparing:-

 

for me

tubeless type

Michelin Pilot Sporty vs Dunlop TT900(either GP or Low Profile), i take Michelin for riding at construction site.

Michelin Pilot Sporty vs Dunlop TT100 Road Master, i take Dunlop for long lasting

 

i am using Michelin Pilot Sporty,

70/90-17 80/90-17 changed at Kempas area around RM170(including installation) on 2 months ago.

[Jack-steiger]

Orh....i was wanted to compare Michelin Pilot Sporty vs Dunlop TT900...look lyk i will geet a michelin 1..... thxs alot

as fer dunlop GP i ask at sg there say the price they rather i get battlex...

[hakeiym]

Where is this kempas area? Is it far frm jb?

[fx110]

Where is this kempas area? Is it far frm jb?

 

i though bro @uma-man had bring u went there already

 

around 10km from Shell after JB custom.....

i remember had PM u the address on 08-04-2011

 

do u interested follow me going there?

[hakeiym]

i though bro @uma-man had bring u went there already

 

around 10km from Shell after JB custom.....

i remember had PM u the address on 08-04-2011

 

do u interested follow me going there?

 

Dnt dare go alone and nt too sure of the place la bro. Might be interested to go along w you, that's if you want to bring me there. haaha. frm your previous post, sounds like stuffs are cheaper there

[fx110]

Dnt dare go alone and nt too sure of the place la bro. Might be interested to go along w you, that's if you want to bring me there. haaha. frm your previous post, sounds like stuffs are cheaper there

 

definitely cheaper then AGL(JB area).

 

mostly i go there on Sat afternoon or Sunday morning(not every week)...

if u interested, PM me your number

[hakeiym]

if u interested, PM me your number

 

your inbox full la bro

[fx110]

your inbox full la bro

 

opss.......

i didnt realize that

[Tequila]

@fx110 earlier on we were talking about me suspecting that my oil seal broken right. now i realise something.. my block area there where u can see by looking from the front tire there, there are bits of oil on it. does this confirm that my oil seal is leaking? the block area there right behind my front hugger..

[hakeiym]

@fx110 earlier on we were talking about me suspecting that my oil seal broken right. now i realise something.. my block area there where u can see by looking from the front tire there, there are bits of oil on it. does this confirm that my oil seal is leaking? the block area there right behind my front hugger..

 

I gt kene like tt before.. Turns out tt my screw thredding connecting the head n block lose alrdy therefore need to rethread

[fx110]

@fx110 earlier on we were talking about me suspecting that my oil seal broken right. now i realise something.. my block area there where u can see by looking from the front tire there, there are bits of oil on it. does this confirm that my oil seal is leaking? the block area there right behind my front hugger..

not so related with oil seal...

looks just gasket issue.

 

I gt kene like tt before.. Turns out tt my screw thredding connecting the head n block lose alrdy therefore need to rethread

worst case will be like that.

[fx110]

anyone want to meet up?

 

Location: Blk 374, Bukit Batok West Ave 5 (next to McD)

Date: 01/06/2011

Time: 9pm

 

1.fx110

2.

3.

[lokyc84]

anyone want to meet up?

 

Location: Blk 374, Bukit Batok West Ave 5 (next to McD)

Date: 01/06/2011

Time: 9pm

 

Meet up discuss about what? Any agenda?

1.fx110

2.

3.

 

Meet up to discuss about what? Any agenda?

[fx110]

Meet up to discuss about what? Any agenda?

 

just simply for kopi session

[fx110]

anyone want to meet up?

 

Location: Blk 374, Bukit Batok West Ave 5 (next to McD)

Date: 01/06/2011

Time: 9pm

kopi session

1.fx110

2.

3.

[PeRiLoUs]

Hi guys! .. need some help here. i'm not sure what exactly the name is of this particular part. Its the shaft connected to yr gear shifter on the left side. what is it called ?? i need to look for that shaft .