SBF Kymco Downtown 125/200/300/350i Cafe 2013

[dashz]

How much is to do a major servicing?

Where do you guys go?

[ProFatSir]

How much is to do a major servicing?

Where do you guys go?

 

Go back to agent.

 

 

http://kymco.com.sg

 

Motor Sport Pte Ltd:

Blk 3007, Ubi Road 1

#01-446

Singapore 408701

 

email: kymco@sIngnet.com.sg

Tel: (65) 6749 6717

(65) 6749 6718

Fax: (65) 6741 6719

 

 

 

Sent from my iPad using Tapatalk

[SGGH]

Apologies, i am just wondering how i can secure my cabin size luggage for DT300i. You guys know how much does a rack cost?

[Advrider]

Apologies, i am just wondering how i can secure my cabin size luggage for DT300i. You guys know how much does a rack cost?

 

Why do you need a rack? I always use bungee cords secure to the rear seat.

 

 

Sent from my iPad using Tapatalk 2

[ProFatSir]

Apologies, i am just wondering how i can secure my cabin size luggage for DT300i. You guys know how much does a rack cost?

 

Use anti slip mat.available from those lelong shop $2.

Lay it on rear seat,bungee cord the luggage.pls use 2 minimum.

 

 

Sent from my iPad using Tapatalk

[parotae]

gotten my downtown 200i.

6000 rpm speed at 80km ??

what is the MET-IN means ?

moving off at only 4000 rpm ?

 

How much is the full servicing including Belt replacement ?

what are the things need to take note?

 

Since no DT2 owners reply, i post DT3 spec

 

DT3

5600rpm-6000rpm @ 100km/h

Moving off about ~3000rpm

 

As the cc is lower rpm will be higher to compensate for pulling a similar weight.

Something to do with the gear ratio.

 

So your DT2 rpm behavior look to be correct.

 

Compare to DT1, DT1 with move off at an even higher rpm like 5000rpm.

[parotae]

Apologies, i am just wondering how i can secure my cabin size luggage for DT300i. You guys know how much does a rack cost?

 

http://images.uscargocontrol.com/22480-15-x-15-motorcycle-cargo-net-with-6-hooks_1_640.jpg

[ProFatSir]

http://images.uscargocontrol.com/22480-15-x-15-motorcycle-cargo-net-with-6-hooks_1_640.jpg

 

Cabin size bro.......

 

sent from sony ericsson GH388H

[hqx]

guys check with you all on 'worm'. u all got use before to repair ur tyre? this rubber worm can last? as jus now i found out my rear tyre tio nail, den no air.

went to nearby bike shop dun have the size of DT3 rear tyre. so use 'worm to repair it.

and for rear tyre cost how much ah?

[kongfu]

guys check with you all on 'worm'. u all got use before to repair ur tyre? this rubber worm can last? as jus now i found out my rear tyre tio nail, den no air.

went to nearby bike shop dun have the size of DT3 rear tyre. so use 'worm to repair it.

and for rear tyre cost how much ah?

 

Depending on which part of the tire the worm is used. Past experience tells me it last longer if the worm is used on the area of contact with the roads. I have once got puntured by a nail in de thread area. After 1 month or so had to go back and re fix it. But the 3rd time mech told me worm can only put 2 times on de same spotm it wont hold de 3rd time so lan lan change new tire..

 

Sent from my SM-N9005 using Tapatalk

[hqx]

Depending on which part of the tire the worm is used. Past experience tells me it last longer if the worm is used on the area of contact with the roads. I have once got puntured by a nail in de thread area. After 1 month or so had to go back and re fix it. But the 3rd time mech told me worm can only put 2 times on de same spotm it wont hold de 3rd time so lan lan change new tire..

 

Sent from my SM-N9005 using Tapatalk

 

 

Thanks kongfu, so i can safely wait till free den go workshop see repair internally or change tyre. MS got repair internally?

how much is a new rear tyre?

[paithorn]

I just changed last month Pirrili $90 for rear tyre at AC Motor.

 

Try going to Car Tyre place to put the worms. My previous bikes had put the worms on same spot more than twice(cos poorly done by Bike shop) and lasted till end of life. Shell Station charges $9 for tyre puncture repair

 

guys check with you all on 'worm'. u all got use before to repair ur tyre? this rubber worm can last? as jus now i found out my rear tyre tio nail, den no air.

went to nearby bike shop dun have the size of DT3 rear tyre. so use 'worm to repair it.

and for rear tyre cost how much ah?

[hqx]

orh. i tot the tyre expensive one. thanks alot pathorn. hope my worm worm can last.

[kongfu]

Thanks kongfu, so i can safely wait till free den go workshop see repair internally or change tyre. MS got repair internally?

how much is a new rear tyre?

 

If u dun go up north den u xan actually leave it until it leak air. If u r lucky some ppl have experience obe worm lasting them till the tire thread is used up.

 

I dun have such luck....maybe its due to tire pressure?

 

Sent from my SM-N9005 using Tapatalk

[kongfu]

I just changed last month Pirrili $90 for rear tyre at AC Motor.

 

Try going to Car Tyre place to put the worms. My previous bikes had put the worms on same spot more than twice(cos poorly done by Bike shop) and lasted till end of life. Shell Station charges $9 for tyre puncture repair

 

I have always goes to car tire shop to do dat but the last time i had a puncture tire, the shop in shell station say they cant mend for me cos the needle they used is too thick for bike's tire. Dunno if its true...

 

Sent from my SM-N9005 using Tapatalk

[paithorn]

might be true.... cos my previous bike were all class 2..... DT300 never had tyre puncture

[hqx]

If u dun go up north den u xan actually leave it until it leak air. If u r lucky some ppl have experience obe worm lasting them till the tire thread is used up.

 

I dun have such luck....maybe its due to tire pressure?

 

Sent from my SM-N9005 using Tapatalk

 

hmm tire pressure. mean i normally pump 240KPA front and rear 260KPA

[kongfu]

might be true.... cos my previous bike were all class 2..... DT300 never had tyre puncture

 

Chey....touch wood...

 

Sent from my SM-N9005 using Tapatalk

[kongfu]

hmm tire pressure. mean i normally pump 240KPA front and rear 260KPA

 

Yup i think it good to chk yr tire real regularly when on worm. U dun want the pressure of the tire to affect the worm compound. I mean if low pressure the worm might not work as good as they shd. Too high pressure.might result inadequate coverage on the hole too... dats my 2 cents la...

 

Sent from my SM-N9005 using Tapatalk

[dashz]

Since no DT2 owners reply, i post DT3 spec

 

DT3

5600rpm-6000rpm @ 100km/h

Moving off about ~3000rpm

 

As the cc is lower rpm will be higher to compensate for pulling a similar weight.

Something to do with the gear ratio.

 

So your DT2 rpm behavior look to be correct.

 

Compare to DT1, DT1 with move off at an even higher rpm like 5000rpm.

 

 

thanks...

is there any aftermarket led tail lamp, airfilter or exhuast for DT2?

[SGGH]

http://images.uscargocontrol.com/22480-15-x-15-motorcycle-cargo-net-with-6-hooks_1_640.jpg

 

Cabin size bro.......

 

sent from sony ericsson GH388H

 

LOL! with a pillion! that's the difficult part. Anw where you guys get the original sparkplug and other parts again?

[ProFatSir]

LOL! with a pillion! that's the difficult part. Anw where you guys get the original sparkplug and other parts again?

 

Customize a big flat rack of the rear.

Spark plug you can get easily every where.

Original parts gonna go back agent(motor sports)

 

 

Sent from my iPad using Tapatalk

[hqx]

i so lucky again. today tio 1 more nail. dun think same place too... this time round went wing yap at AMK. they also dun keep stock on our DT300 rear

tire size. our size is 150 right?

[kongfu]

i so lucky again. today tio 1 more nail. dun think same place too... this time round went wing yap at AMK. they also dun keep stock on our DT300 rear

tire size. our size is 150 right?

 

Huh u sure its 150?

 

Sent from my SM-N9005 using Tapatalk

[kongfu]

Sorry i took your 150 for 15. Tot u say 15" tire lol..... ya dt using 150/70-13

 

Sent from my SM-N9005 using Tapatalk