Yamaha TZM 150 Riders

[Boyee]

Hello Everyone... I Am Looking Fer TzM Meter.. Not The Y2k One.. Anyone Here Selling It? =)

[karLorenzo]

Hey fellow tzm riders, i'm planning to get a tzm frm de xing motor at ubi next month...i'm new to bikes so I noe nuts..i went to c da bike n frm da outlook it looks quite gd..but wad worries me is da engine condition..do u tink any of the more experienced tzm riders here cn help me inspect da engine wen I wanna buy it? N hw much is full service for tzm at jb? N any idea where cn get ori y1 block?thx alot for ur help bros...

 

WOW! De Xing Mtr.haha..

[Boyee]

Bro.. I Bought My Tzm From Him Last Year.. And.. The Mistake I Did Was.. I Jus Looked On The Outlook.. And I Bought The Bike.. And Till I Bought The Bike.. I Din Had The Chance To Test Ride The Bike As The Shop Owner Told Me That Its Lay Up.. And When i ToOk The Bike.. Trust Me.. I Brought My Bike To Jb Jus To Do A Normal Full Service.. Ending Up Changing My Valve Itself In The 1st Visit Of A Bike Shop Afta I Took My Bike.. I Suppose You Are Referring To The Yellow Tzm In De Xing Motor.. Pls Pursue The Owner To Let You Fer A Test Ride.. See Whether The Valve Opens Smoothly At 7K to 7.5K RPM.. And Check The Other Basic Necessities.. Yeaa.. Thats Wat I Failed To Do.. And Hope You Don Go Thru Wat I Went Thru.. So Thought Of Sharing With You.. =)

[Boyee]

Hey fellow tzm riders, i'm planning to get a tzm frm de xing motor at ubi next month...i'm new to bikes so I noe nuts..i went to c da bike n frm da outlook it looks quite gd..but wad worries me is da engine condition..do u tink any of the more experienced tzm riders here cn help me inspect da engine wen I wanna buy it? N hw much is full service for tzm at jb? N any idea where cn get ori y1 block?thx alot for ur help bros...

 

Bro.. I Bought My Tzm From Him Last Year.. And.. The Mistake I Did Was.. I Jus Looked On The Outlook.. And I Bought The Bike.. And Till I Bought The Bike.. I Din Had The Chance To Test Ride The Bike As The Shop Owner Told Me That Its Lay Up.. And When i ToOk The Bike.. Trust Me.. I Brought My Bike To Jb Jus To Do A Normal Full Service.. Ending Up Changing My Valve Itself In The 1st Visit Of A Bike Shop Afta I Took My Bike.. I Suppose You Are Referring To The Yellow Tzm In De Xing Motor.. Pls Pursue The Owner To Let You Fer A Test Ride.. See Whether The Valve Opens Smoothly At 7K to 7.5K RPM.. And Check The Other Basic Necessities.. Yeaa.. Thats Wat I Failed To Do.. And Hope You Don Go Thru Wat I Went Thru.. So Thought Of Sharing With You.. =)

[Boyee]

Hey fellow tzm riders, i'm planning to get a tzm frm de xing motor at ubi next month...i'm new to bikes so I noe nuts..i went to c da bike n frm da outlook it looks quite gd..but wad worries me is da engine condition..do u tink any of the more experienced tzm riders here cn help me inspect da engine wen I wanna buy it? N hw much is full service for tzm at jb? N any idea where cn get ori y1 block?thx alot for ur help bros...

 

Bro.. I Bought My Tzm From Him Last Year.. And.. The Mistake I Did Was.. I Jus Looked On The Outlook.. And I Bought The Bike.. And Till I Bought The Bike.. I Din Had The Chance To Test Ride The Bike As The Shop Owner Told Me That Its Lay Up.. And When i ToOk The Bike.. Trust Me.. I Brought My Bike To Jb Jus To Do A Normal Full Service.. Ending Up Changing My Valve Itself In The 1st Visit Of A Bike Shop Afta I Took My Bike.. I Suppose You Are Referring To The Yellow Tzm In De Xing Motor.. Pls Pursue The Owner To Let You Fer A Test Ride.. See Whether The Valve Opens Smoothly At 7K to 7.5K RPM.. And Check The Other Basic Necessities.. Yeaa.. Thats Wat I Failed To Do.. And Hope You Don Go Thru Wat I Went Thru.. So Thought Of Sharing With You.. =)

[rayyan90]

Bro.. I Bought My Tzm From Him Last Year.. And.. The Mistake I Did Was.. I Jus Looked On The Outlook.. And I Bought The Bike.. And Till I Bought The Bike.. I Din Had The Chance To Test Ride The Bike As The Shop Owner Told Me That Its Lay Up.. And When i ToOk The Bike.. Trust Me.. I Brought My Bike To Jb Jus To Do A Normal Full Service.. Ending Up Changing My Valve Itself In The 1st Visit Of A Bike Shop Afta I Took My Bike.. I Suppose You Are Referring To The Yellow Tzm In De Xing Motor.. Pls Pursue The Owner To Let You Fer A Test Ride.. See Whether The Valve Opens Smoothly At 7K to 7.5K RPM.. And Check The Other Basic Necessities.. Yeaa.. Thats Wat I Failed To Do.. And Hope You Don Go Thru Wat I Went Thru.. So Thought Of Sharing With You.. =)

 

Ouh ok then...so I juz haf to find out if da bike is lay up n if it is,I haf to try n contact da owner for a test ride?btw de xing motor gt bad reputation is it?n how much for a new ypvs in jb?sori ah...new to buying bikes so nt familiar wit da procedures...

[drak3st3r]

TZM

1 Rear mudguard/undertray - $50

2 2t pump gear - $20

3 yamaha cdi - $100

 

New Year clean-up sales

Help me clear these items pls by not helping me throw away, hahahah but by buying them.

contact 82334350 for more details

 

also if you got problems with your bike i can help fix or adjust it for a small fee. just earn some pocket money

wiring adjustments, 2t adjustments. carb and 2t sync. carb wash, powervalve and servo adjustments and stuff

contact me for more info.

 

Dunlop TT900 F GP 110/70 Made in Japan

used it on my krr.

thread still got around 75% u can actually still see the wax lines here and there

used only for 2 months before scraping bike

less then 300 km clocked.

New one is sold for $140

SELLING FOR $50

[Pulser]

Anybody needs 16T sprocket for the front, let me know. I have RXZ front sprocket. This one fits the TZM150. TZM stock front is 17T. Changing to 16T will improve your pickup even more but your top speed will reduce.

 

http://www.singaporebikes.com/forums/showthread.php/345471-Front-sprocket-16T-RXZ

[drak3st3r]

Anybody needs 16T sprocket for the front, let me know. I have RXZ front sprocket. This one fits the TZM150. TZM stock front is 17T. Changing to 16T will improve your pickup even more but your top speed will reduce.

 

http://www.singaporebikes.com/forums/showthread.php/345471-Front-sprocket-16T-RXZ

 

Tzm stock is 16 bro.

[beasong91]

Guys if i stop using my 2t pump but did not remove it and start using premix.. is there any side effect?

or i have to remove 2t pump before i should use premix?

anyone kin to share?

[Pulser]

Tzm stock is 16 bro.

 

Oh really? I wanted to test both 16T and 17T front for my pulsar and I went to LAB and they gave me 16T from RXZ and 17T from TZM150.

Currently, I have put the 17T and I am happy with it. Dont need the 16T so selling it.

 

[Rempit10]

Bros, yesterday my bike the valve can open ..then now cannot open ..stress ..need change valve how much?

[entyla]

Bros, yesterday my bike the valve can open ..then now cannot open ..stress ..need change valve how much?

valve cant open?perhaps the pulley cable snap?if the servo spoil..aiyo very ex liao...about SGD$300

[XxPJYxX]

Selling lonsdale tzm custom moulded fairings full set... 1 to 1 exchange of fairings will be considered too...

[XxPJYxX]

I have moulding of the split seat. But paintwork done. I'm selling the full set of the fairings if u want. 1 to 1 exchange fairings also can. But u need top up cash.

[XxPJYxX]

GUYS, TZM can change seat to split seat? Like SP like that.

 

I have moulding of the split seat. But paintwork done. I'm selling the full set of the fairings if u want. 1 to 1 exchange fairings also can. But u need top up cash.

[XxPJYxX]

Anybody needs 16T sprocket for the front, let me know. I have RXZ front sprocket. This one fits the TZM150. TZM stock front is 17T. Changing to 16T will improve your pickup even more but your top speed will reduce.

 

http://www.singaporebikes.com/forums/showthread.php/345471-Front-sprocket-16T-RXZ

 

Stock is 16Teeth. I'm using 15/45... Lol

[XxPJYxX]

Guys if i stop using my 2t pump but did not remove it and start using premix.. is there any side effect?

or i have to remove 2t pump before i should use premix?

anyone kin to share?

 

Do not premix before u remove your 2t box. Air will still go in. U need to remove the box, shorten the tube from the box to the carburetor and use a ball bearing to block the tube. Air and rain water will not go in after u blocked it.

[XxPJYxX]

anyone know how much will it cost to fit digital meter on tzm?

 

anyone got 2nd hand faring to sell by the way?

 

U want original fairings or moulded fairings?

[XxPJYxX]

any doctors to recommend????

 

Try Sanfu at kaki bukit ave 3, shun li indutrial complex. It's just opposite the coffee shop.

[XxPJYxX]

road_[/MENTION]duke;7295540]servo is like the brain of tzm..

 

once ur servo spoilt..chnage new set bo pian

 

new set of servo ll cost u sgd250 at rowell road

 

a set of 6 for ur clutch plates will cost some ard sgd21 to sgd 24 cant rmbr

 

Er... I think you're missing a few zeros behind the sgd21 and sgd24.

If I'm not wrong, a full set of clutch plates, stock, will cost u at least $500. Lol. Sgd21 to sgd24. Lol. Buy from Thailand ah? Lol.

[XxPJYxX]

road_[/MENTION]duke;7303126]TZM IS FAST ENUF TO TAIL A S4..

 

y would u wanna change it..

in short if ur tzm u r gonna used it for mostly on sg roads n not on e track just let it be standard

trust me dun port as well as skim..headache

petrol, 2t gonna burn u in ur pockets..

 

nt to mention the aftermath of the minor probs or if not major ones

 

u wan more power, more sppeed, more responsive engine go get a class 2a n 2 upgrade

 

 

standard carb n block the best

 

Wad is S4? I only know TZM fast enough to overtake GSX-R 1000 at corners.

PIE to BKE the S-bend. 140km/h corner I think. Lol. Never see speedo when cornering. Only before and after. Around 140-160km/h...

[Razrash]

Er... I think you're missing a few zeros behind the sgd21 and sgd24.

If I'm not wrong, a full set of clutch plates, stock, will cost u at least $500. Lol. Sgd21 to sgd24. Lol. Buy from Thailand ah? Lol.

 

you sure not?

clutch plates only...

[drak3st3r]

Er... I think you're missing a few zeros behind the sgd21 and sgd24.

If I'm not wrong, a full set of clutch plates, stock, will cost u at least $500. Lol. Sgd21 to sgd24. Lol. Buy from Thailand ah? Lol.

 

bro one clutch plate costs on $3.5 for tzm so 6 will cost only 21 SGD. where u buy for $500 sia??

[drak3st3r]

Wad is S4? I only know TZM fast enough to overtake GSX-R 1000 at corners.

PIE to BKE the S-bend. 140km/h corner I think. Lol. Never see speedo when cornering. Only before and after. Around 140-160km/h...

S4 is super 4 bro. u sure tzm can overtake gsxr in corner. i dun know cause i have never see one in action or race but it sounds impossible bro unless the GSXR happen to be on tow truck ah.haha.. no offence