[Ref] S4 Component Cost

[Me_No_Money]

wow frm bike n scooter.izzit bcos u frm nrc tts y gt discount?

[choyster]

nope... the above mention is open to all... not cos i am from NRC.

btw its my friend who is not from NRC who change his tires... so put the pricing here to share with all.

 

mine still good.. hahaha..

 

cheers.

[seancxm]

i'm also using shinko tyres.. its not too bad in my opinion

[Me_No_Money]

i tot BnS giving special rate to nrc members. heehee. thx.

 

 

anyway hw does shinko fare compare wth dunlop

[choyster]

BnS does give a small discount to NRC members, but its not much.

 

heard that the shinko tires have gone throu tests and proven. maybe seancxm can give us more details on the performance on both wet and dry in his opionion?

 

i'll be changing to shinko also when my tires are due to try out the tires... if i know BnS doing the anti theft thingy FOC with tire change, i would have change the tires when i went there to do the anti theft thingy. HAHAHahaha...

 

:banana:

[seancxm]

i personally feel it grips really well on both wet and dry conditions. however i cant compare yet with other brands of tyres on S4 as this is my 1st pair.

what i can say for sure is that it's good on very high speeds even. so its not exactly cheapo lousy tyres.

[Me_No_Money]

ok thx.

sean wan to xchange bike wth me anot?wahhaah

[GreeKo]

 

Recently I saw some new spec3 using Dunlop SportmaxII D204. Any review on it?

 

Anyway, apart from GPR70, does any bikeshop here selling

• D207
  
• D220 ST
  
• D205
  

Here a link to it Dunlop UK

 

I believe da D205 & D220 are design for sport touring n the latter is the newest model. If not available here, I gez BT020 is my 2nd option. TIA!

[Epredator]

changed my battery at HKL last sat for $85

kind of expensive

[Dscheng]

Originally posted by Epredator@Nov 17 2006, 10:56 AM

changed my battery at HKL last sat for $85

kind of expensive

Wht brand de? Yuasa? If i not wrong, LAB only sell $45..

[cobbett]

change a super white blub for my headlight.......and felt is dam hot.....

 

Change at JB for RM10.........is it normal for super white light to be so hot???

[nebulaz]

H4 vtec3 headlight bulb-eversucess 6bucks

 

front n back sprocket(sun sprocket)+ oring chain= 160

[ichiro_jeff]

anyone knOw how much it is to re wrap the mircron end can?

[Dscheng]

Originally posted by cobbett@Nov 17 2006, 03:18 PM

change a super white blub for my headlight.......and felt is dam hot.....

 

Change at JB for RM10.........is it normal for super white light to be so hot???

Wht is wattage of the bulb ? if it is 60/55w tht is normal de. Halogen bulb are quite hot de. Erm one more thing, nvr buy a cheap bulb.. trust me !

[akirajo]

Originally posted by ichiro_jeff@Nov 17 2006, 08:06 PM

anyone knOw how much it is to re wrap the mircron end can?

I just fix mine at Seng Kwang a few months back for $80, i'm not sure if the price is still valid maybe you like to pay them a visit and check out the price.

[Kushinagar]

Updated Listing As On 18th Nov 2006

 

For followup reply pse;-

 

Zax : Kindly give a break down on the pricing for ?changed fork oil and steering cone total : $ 100? done at Southern Motor

 

Ah Pek : Kindly indicate location for ?Metzeler Sportec M3 $360, Rear Brake Pads $30?

 

TangoBoy : Able to break down the pricing for ?Just did these to my bike...All for $234 @ Peter's?

 

 

 

Seeking assistance : Anyone able to advise how to make the hyper-link work in a PDF document? Thks in advance for the help.

 

-----------------------------------------------------------------------------------------------

Next Update at Page 57

[TangoBoy]

I don't have the exact breakdown but I'll try to put in the individual prices based on what I have asked him.

 

Just did these to my bike...All for $234 @ Peter's.

 

-Front wheel bearings $20x2

-Steering Cone $90

-Semi-syn Engine Oil x3 (Don't noe what brand $10/btl) Will check the brand of the engine oil.

-oil filter $12

-STP engine oil treatment for 4L $6.50

-tune carb

-changed Clutch cable $20 i guess. (found out the previous one wasn't for HyperVtec)

-fix ERP leather cover (bought myslef)

Labor I don't know.

 

I'm sorry, I really didn't bother the breakdown since he's very trusted by some of my frens.

[lohjiji]

Hi there, I just changed a original brand new set of ignition switch for my Ver S @ $135 c/w installation. Is it X??? Pl advise, tx

[IST]

Just fix a brand new set of Sportec M3 $330 ( good price )

 

Aljunied Motor Works ( Sim Drive )

[sabbaha]

Anyone know wats the Tel no. for Boon siew? N where is it located. How much does it cost to repair the HISS system ignition? And Batt, can it be charge n How much? Pls help? will be most Appreciate it guys.....

[dintigger]

Originally posted by Kushinagar@Nov 18 2006, 01:33 PM

Updated Listing As On 18th Nov 2006

 

For followup reply pse;-

 

Zax : Kindly give a break down on the pricing for “changed fork oil and steering cone total : $ 100” done at Southern Motor

 

Ah Pek : Kindly indicate location for “Metzeler Sportec M3 $360, Rear Brake Pads $30”

 

TangoBoy : Able to break down the pricing for “Just did these to my bike...All for $234 @ Peter's”

 

 

 

Seeking assistance : Anyone able to advise how to make the hyper-link work in a PDF document? Thks in advance for the help.

yo Bro

 

Inserting a hyperlink isn't very hard, but you will need the full

version of Adobe Acrobat, and not just the free Reader.

You can get a free 30 day tryout version of Acrobat Pro here:

http://www.adobe.com/products/acrobatpro/tryout.html

or at your friendly neighbourhood pirate store

 

To insert a hyperlink in a PDF is quite simple.

let's say you wanted a hyperlink on the text

Bike Locater at the bottom of the PDF.

In Acrobat 6.0 Pro you need to:

 

- click the Select Text button (on the button bar beside the hand) to

get a text selection cursor.

 

- right-click the highlighted text and select 'Create Link'.

 

- select 'Open a web page' and enter its address, or link to another

file or page in the document, depending on what you want the link to

do.

 

And that's all there is to it.

 

Some PDF files may be created with access restrictions that prevent

you from editing them. In this case it will not be possible to add

hyperlinks unless you are the creator of the document.

 

anyway i added a html help vid on flash if you want to see it ..

 

I hope this helps you out.

[dintigger]

sorry i cannot add the zip if you want the file you need to give me your email and i send it over to u

[ValenYono]

Top overhaul done at K&T on 22/11/06.

 

 

Carburettor Insulator - $60

Top set Gasket - $160

4 set of Piston ring - $200

8 pcs of Valve - $152

16 pcs of Valve seal - $48

 

Coolant Parts

Coolant + flush (Yamaha brand I think, or something close to dat name) - $20

2 pcs of Metal hose(centre of engine just below the carb) - $50

Lower joint hose - $28

Coolant cap holder - $25

7 pcs of Water hose - $98

2 pcs of Metal hose connector(bottom left/right) - $33

 

 

3 bot of Engine Oil (Motul 300v) - $78

Spark plug(Denso)v - $40

Oil filter - $15

 

Total: $1187/-

[Sretroyl]

Originally posted by ValenYono@Nov 22 2006, 09:44 PM

Top overhaul done at K&T on 22/11/06.

 

 

Carburettor Insulator - $60

Top set Gasket - $160

4 set of Piston ring - $200

8 pcs of Valve - $152

16 pcs of Valve seal - $48

 

Coolant Parts

Coolant + flush (Yamaha brand I think, or something close to dat name) - $20

2 pcs of Metal hose(centre of engine just below the carb) - $50

Lower joint hose - $28

Coolant cap holder - $25

7 pcs of Water hose - $98

2 pcs of Metal hose connector(bottom left/right) - $33

 

 

3 bot of Engine Oil (Motul 300v) - $78

Spark plug(Denso)v - $40

Oil filter - $15

 

Total: $1187/-

how long does it takes for the whole process...

[ValenYono]

Well, I send it on Monday evening and I collect it on Wed evening. Depends on the shop busy or not also.