[Discussion] Technical - Power Cut Red Rev Reviews

[Kioz]

Bro just curious how much hp does your bike make on the dyno?

Your ride is by far the most well maintained ride I have seen. Kilat man!

 

haha thank you thank you =)

 

well have not run a dyno with my recent upgrades..

i too would love to know..but not until i get my yoshi carb =D

wanna see how much torque i gain.. O.O

[Fazli]

for bikes like ours, we need gd torque as our bikes are quite heavy compared to sportbike.

[justin8967]

i got a redvec installed too. lol. thot is for voltage stablising purpose, for better pickup and response. dont really know it will affect my top speed. anw, i nvr go pass the 190km/hr. i cleared 160kmhr max at 2nd link.

[stoner]

i got a redvec installed too. lol. thot is for voltage stablising purpose, for better pickup and response. dont really know it will affect my top speed. anw, i nvr go pass the 190km/hr. i cleared 160kmhr max at 2nd link.

 

Wooo.... Yo Justin... When you get better to ride...Either drop me an sms or PM. Let's have a short trips to Kulai for mum...mum...

[CyBerKnighT]

Actually there are quite a few of these items such as rev tec, red rev and i've seen one s4 using a 'posh' brand to remove this power cut.. From my point of view, i don't see this device as a way to push your RPM pass the 'red zone'. It just somehow acts as a bypass when your bike reach a certain speed and allows your bike to push a bit more which actually is dangerous. If you wanna push your RPM to the max, the only way is to tuned up your engine which cost quite alot..

[epk21]

upppppppppppppppppppppppp

[Cloveresy_SBF]

Hi juz to share I'm riding spec3 .. be4 I install red rev, my vtec will on at rpm 7 with no.6 gear at speed of 110km/h. After installed red rev, there is a different of my vtec on earlier at rpm 6.5 with no.6 gear at speed of 110km/h and will feel the respond faster then b4. If I drag first gear, sometime can hit rpm 14 but mostly on hit rpm 13.5 ... Tat mean with red rev, u can drag every gear longer the without it and hit 190km/h faster then b4 ... And other thing to share is ( no offend to rvf rider as Im once a rvf rider too ) actually stock s4 compare with stock rvf, super4 with lead all the way till 190km/h but rvf will overtake super4 when it hit more then 190km/h . But rvf take time to overtake after hit 191km/h... As super4 can only hit 190km/h without any mod ( which wat the meter shown )... There is a way u can hit around 240-50km/h which is add on a high cam for ur super 4 but it will cos u a big bomb at around 2k plus... Tat all I have to share thankssss...

[stoner]

Hi juz to share I'm riding spec3 .. be4 I install red rev, my vtec will on at rpm 7 with no.6 gear at speed of 110km/h. After installed red rev, there is a different of my vtec on earlier at rpm 6.5 with no.6 gear at speed of 110km/h and will feel the respond faster then b4. If I drag first gear, sometime can hit rpm 14 but mostly on hit rpm 13.5 ... Tat mean with red rev, u can drag every gear longer the without it and hit 190km/h faster then b4 ... And other thing to share is ( no offend to rvf rider as Im once a rvf rider too ) actually stock s4 compare with stock rvf, super4 with lead all the way till 190km/h but rvf will overtake super4 when it hit more then 190km/h . But rvf take time to overtake after hit 191km/h... As super4 can only hit 190km/h without any mod ( which wat the meter shown )... There is a way u can hit around 240-50km/h which is add on a high cam for ur super 4 but it will cos u a big bomb at around 2k plus... Tat all I have to share thankssss...

 

S4 with high cam can hit 240km/hr +?

 

 

That's new.... With Stock Gear Ratio? Because... If I not wrong... the original Spec 3 Gear Ratio max speed would'nt even make it beyond... 210+...

 

But...I could be wrong... Could some one prove me wrong? It'll be very interesting to see a spec 3 with original Final Gear Ratio to hit beyond... or above 200km/hr.

[Cloveresy_SBF]

Yes need to be change if i not wrong.... total cost around 2k +++

[stoner]

Yes need to be change if i not wrong.... total cost around 2k +++

 

$2k... ok.... So who to look to?

 

As I understand... There's no final Gear ratio being produce out of Japan for Street CB400... Care to advise where to get them?

 

Thanks...

[boymay22]

my top speed now is 210-215kmh.. this red rev removes speed cut only, not other than that.

[STRYKER]

my top speed now is 210-215kmh.. this red rev removes speed cut only, not other than that.

 

S4 meter finish at 190kph...how u guys get readings of 210-215kph???

 

 

}STRYKER{ sent this post via iPhone using Tapatalk

[4DToToBig Sweep]

I'm still finding red rev for my 3... Any shop still has it>?

[boymay22]

S4 meter finish at 190kph...how u guys get readings of 210-215kph???

 

 

}STRYKER{ sent this post via iPhone using Tapatalk

 

calculated rougly as the needle goes over than 190. maybe i should take video and upload in youtube

[STRYKER]

calculated rougly as the needle goes over than 190. maybe i should take video and upload in youtube

 

If u say u follow a 600 side by side den shud be ok lah...but if u based on ur own meter cannot be accurate la coz meter finish 190kph anything after tat is inaccurate...

Personally i've a fren riding a spec 2 without red rev. I ride a 1100cc my meter 200kph he' ahead of me tats y i know his really can hit 200kph.but i dunno wats done on his bike.all i know is he has a micron slip on only. Even my version s with semi full(4-1 headers) micron cannot chase him...

 

 

}STRYKER{ sent this post via iPhone using Tapatalk