VFR 800

[inzaghi_75]

Hi...

 

For those guys who have went up to MHS the last time round:

 

1. Did u guys having problem finding petrol up there or did u pump gasohol?

2. If u used gasohol, did u add any fuel additives or treatment of sorts?

 

Finding Petrol Stations along the route up is not a problem, usually there will be petrol stations, namely PTT on the outskirts of towns.Stick to half tank if you wanna play safe. The most likely problem I think you will face is bum ache.

 

I'm not entirely sure about the effect of Gasohol on FI bikes though I had no problem with it during my trip up MHS.

[inzaghi_75]

Do you guys find your low beam headlights aimed too high?

 

During the I first week that I got my bike I was rather puzzled at the stares directed at me until i realised that my headlight aim was too high. U can make adjustment of your headlight aim using a philips screwdriver. The attached picture might be of use.

[vfrT]

During the I first week that I got my bike I was rather puzzled at the stares directed at me until i realised that my headlight aim was too high. U can make adjustment of your headlight aim using a philips screwdriver. The attached picture might be of use.

 

The older 800FI don't need to remove anything to adjust the headlight aim. There are 2 built-in holes in the meter nacelle plastic, one for each lamp, to allow a long screw driver to be inserted thru for adjustment - altho you need to grope / feel about to aim for the adjusting screw - but you get the hang of it after a while.

[vfrboy]

Hi there.. Do u know where I can get the service manual for VFR800?

[AR2 Performance]

Hi there.. Do u know where I can get the service manual for VFR800?

 

I have a set zapped & binded. If you wanna save cost on the fee drop me a buzz.. selling away 75% from zap & bind.

[vfrboy]

75 percent zap & bind? u mean its in hardcopy n 75 percent of e market price?

[AR2 Performance]

75 percent zap & bind? u mean its in hardcopy n 75 percent of e market price?

 

yes its in hardcopy (zapped & binded), going for 75% of the printing & binding cost.

[inzaghi_75]

Hi Guys,

 

I have a used KNN air filter for VFR800 Vtec to let go. The filter is good to use once its been washed, cost abt $10 to get it washed at mototiams.

 

selling at $60.

 

Int parties can sms me at 91869448 tks.

[stwonder]

Hi Guys,

 

Anyone selling their beloved VFR?

 

Very keen on riding one.. heard good reviews about it and one of my fren is riding it.

 

Pref the carburettor version.

[jk911]

Any one selling a Red VFR? Or seen any in any bike shops hope u all can ler me noe .. i wana to BE a Viffer hee =D

[Guest Ridzzy]

Any one selling a Red VFR? Or seen any in any bike shops hope u all can ler me noe .. i wana to BE a Viffer hee =D

 

Me too..I wanna be Viffer, but i heard that VFR spare parts difficult to get and expensive..Is that true?

[Rep-56]

i need feed back ... i just currently bought a vfr02 800, picking up from lower gear e.g 2nd and 3rd from 4 rpm to 8 rpm feels like the tail vibrating ... izzit normal because of the underseat exhaust.

[vfrboy]

i need feed back ... i just currently bought a vfr02 800, picking up from lower gear e.g 2nd and 3rd from 4 rpm to 8 rpm feels like the tail vibrating ... izzit normal because of the underseat exhaust.

 

Yea.. me too experiencing the same prob... Up the multi storey carpark have to use gear 1, if not engine vibrations...

I am getting use to it though.. I have checked with the others, ey said that due to e v-engine...

[zod]

For me, as long as RPM

So usually change at 5k. if drop below 4k, downgear.

[GuiNNeSS]

hi rstopel hows the bike doin?? haven seen for it for long time liao

the racks n all the boxes i forgot wats the price liao but i got mine

at a special price frm mtechnic as im familiar with them. the side boxes alone should cost $650-$700 and the top box is $350 onwards if im not wrong.

 

 

 

I have a H&B top rack and a set of H&B racks for side paniers. I don't use the side racks as I don't have the paniers and the H&B are actually too wide. Not sure about the price as it came with the bike but you can check with M-technic in Ubi as they have the full H&B range

[Rep-56]

For me, as long as RPM

So usually change at 5k. if drop below 4k, downgear.

orrh ... now i get it ... must play higher rpm

 

Yea.. me too experiencing the same prob... Up the multi storey carpark have to use gear 1, if not engine vibrations...

I am getting use to it though.. I have checked with the others, ey said that due to e v-engine...

 

lucky i don't need go multistorey carpark like u .. if not i sure to stall engine at the ramp everyday ... hahax

 

 

thanks guys,

[zod]

Yes I believe it's due to the engine being a V4.

I experienced the same thing on my previous RVF.

[Roy]

During the I first week that I got my bike I was rather puzzled at the stares directed at me until i realised that my headlight aim was too high. U can make adjustment of your headlight aim using a philips screwdriver. The attached picture might be of use.

 

Hi, is the manuel online? Wish to download it. Thanks.

[rstopel]

hi rstopel hows the bike doin?? haven seen for it for long time liao

the racks n all the boxes i forgot wats the price liao but i got mine

at a special price frm mtechnic as im familiar with them. the side boxes alone should cost $650-$700 and the top box is $350 onwards if im not wrong.

 

Hey Koma, Have been riding a silverwing for the past months. Got to slow down a bit as I got too many points Still got the viffer but it is with a friend right now. Just did full servicing at 100k and running very well

[Roy]

Hey Koma, Have been riding a silverwing for the past months. Got to slow down a bit as I got too many points Still got the viffer but it is with a friend right now. Just did full servicing at 100k and running very well

 

Hi, can you recommend me a shop to service or tune. Recently changed battery and now when the engine warmed up, sometimes the idling too low and the engine dies off.

 

Thanks in advance.

[zod]

Hi, can you recommend me a shop to service or tune. Recently changed battery and now when the engine warmed up, sometimes the idling too low and the engine dies off.

 

Thanks in advance.

 

Prob can first try to adjust the idling speed higher?

[zod]

Anyone having this experience.

 

After bike is started, both cold and warmed up, sit on bike, hold both handlebars. Can feel some vibrations. When clutch in, these vibrations is lesser aka smoother.

 

P/S : Yup, vibrations are normal, erm, the key thing is, vibrations lessen when clutch in. It's not normal, cos previously, this didn't happen. Clutch in/out same level of vibrations.

 

So, any idea?

[YahooRider]

Hey Koma, Have been riding a silverwing for the past months. Got to slow down a bit as I got too many points Still got the viffer but it is with a friend right now. Just did full servicing at 100k and running very well

 

Bro how u been . ? When u going to let go let me know

 

Take care and enjoy yr new bike

 

Hi, can you recommend me a shop to service or tune. Recently changed battery and now when the engine warmed up, sometimes the idling too low and the engine dies off.

 

Thanks in advance.

 

Problem solve. . Enjoy the ride

[Roy]

Bro how u been . ? When u going to let go let me know

 

Take care and enjoy yr new bike

 

 

 

Problem solve. . Enjoy the ride

 

Thanks Yahoo rider, does seem to be solved. Cheers.

[Rep-56]

roy regarding uyr idling problem .. i used to have this kinda prob on my s4, went to HKL and let ah-zhen inspect ... he said the injection pin spoil then got it changed and fully check the bike and found out that the spark plug cord was leaking also got that changed too ... after that did tuning and bike was roaring out of the workshop performing like a million dollar jet plane ... hahahax.

 

My Advice is to go to find a shop and let the mechanic listen to the bike ... don't rush them when they checking ur bike, i'm sure they'll find out whats wrong and make ur ride feel like a miliion dollar jet plane .... cheers.