The Grip-Lock System - Hold On To Your Ride ($95)

[Unique_Motorsports]

The Grip-Lock System - Hold On To Your Ride ($95)

http://i785.photobucket.com/albums/yy135/uniquemotor3/griplock.jpg

 

Grip-Lock is Kiwi ingenuity - a world first. Providing the worlds only motorcycle security device that clamps both throttle and hand brake - instantly. No twist grip - no acceleration. Compact, lightweight and rugged, each Grip-Lock comes with 2 flat blade laser cut keys plus 3 rubber grip inserts for maximum adjustability and perfect fit.

 

Features:Highly visible

Compact (fits easily in pocket, bag or glove compartment)

Self explanatory, quick and easy. If security is easy you'll use it every time.

Laboratory developed and tested to resist extreme impact levels.

Strong yet lightweight. Three hardened steel inserts designed to destroy hacksaw blades.

Fits most scooters, motorcycles and ATV's.

Stops embarrassing falls - Unlike disc locks, you can't forget it's in place, no bending, no disc dirt or street grime.

Highly adjustable variations in use twist grip size and brake lever position - on clutch or brake lever, with brake on or off - while still immobilising the twist grip. Slider allows you to adjust the desired amount of pressure on the brake.

Anti drill, anti pick lock barrel with 50,000 key combinations.

Key not required to lock.

Used on the front brake lever will keep the bike from being pushed off the center or side stand.

Used on the rear brake lever will hold the back tyre from spinning allowing for the loosening or re-torquing of the clutch nut when doing belt, clutch and variator maintenance.

 

Specifications:Grip Guide: Fits 95% of all motorcycles. Twist grip sizes from 27-38mm diameter plus 3 grip inserts of varying sizes.

Keys: 2 flat blade anti-pick keys.

Casing: High pressure injection moulded with 30% glass filled nylon

Reinforcement: Reinforced with 3 x 3.1mm hardened steel rods - specifically designed to be harder than hacksaw blades

Colour: Choose from 5 colours - yellow, red, black, green, pink

Weight: 330g (11.05oz)

Dimensions: 15 cm long x 4.5cm x 5cm (6" x 1-3/4" x 2")

Stainless Steel Pins: Stainless steel hinge and locating pins for weather durability

Raised mounting platform - Protected by raised ring border to prohibit forcible removal

Labelling: High quality poly carbonate identification panels to survive extreme weather (made to endure New Zealands severe weather conditions).

[Unique_Motorsports]

The Grip-Lock System - Hold On To Your Ride ($95)

http://i785.photobucket.com/albums/yy135/uniquemotor3/griplock.jpg

 

Grip-Lock is Kiwi ingenuity - a world first. Providing the worlds only motorcycle security device that clamps both throttle and hand brake - instantly. No twist grip - no acceleration. Compact, lightweight and rugged, each Grip-Lock comes with 2 flat blade laser cut keys plus 3 rubber grip inserts for maximum adjustability and perfect fit.

 

Features:Highly visible

Compact (fits easily in pocket, bag or glove compartment)

Self explanatory, quick and easy. If security is easy you'll use it every time.

Laboratory developed and tested to resist extreme impact levels.

Strong yet lightweight. Three hardened steel inserts designed to destroy hacksaw blades.

Fits most scooters, motorcycles and ATV's.

Stops embarrassing falls - Unlike disc locks, you can't forget it's in place, no bending, no disc dirt or street grime.

Highly adjustable variations in use twist grip size and brake lever position - on clutch or brake lever, with brake on or off - while still immobilising the twist grip. Slider allows you to adjust the desired amount of pressure on the brake.

Anti drill, anti pick lock barrel with 50,000 key combinations.

Key not required to lock.

Used on the front brake lever will keep the bike from being pushed off the center or side stand.

Used on the rear brake lever will hold the back tyre from spinning allowing for the loosening or re-torquing of the clutch nut when doing belt, clutch and variator maintenance.

 

Specifications:Grip Guide: Fits 95% of all motorcycles. Twist grip sizes from 27-38mm diameter plus 3 grip inserts of varying sizes.

Keys: 2 flat blade anti-pick keys.

Casing: High pressure injection moulded with 30% glass filled nylon

Reinforcement: Reinforced with 3 x 3.1mm hardened steel rods - specifically designed to be harder than hacksaw blades

Colour: Choose from 5 colours - yellow, red, black, green, pink

Weight: 330g (11.05oz)

Dimensions: 15 cm long x 4.5cm x 5cm (6" x 1-3/4" x 2")

Stainless Steel Pins: Stainless steel hinge and locating pins for weather durability

Raised mounting platform - Protected by raised ring border to prohibit forcible removal

Labelling: High quality poly carbonate identification panels to survive extreme weather (made to endure New Zealands severe weather conditions).

[ridz_o_rama]

Hi Unique

 

Do you have this in stock or do I have to wait for the order?

 

Cheers

[Unique_Motorsports]

Hi Unique

 

Do you have this in stock or do I have to wait for the order?

 

Cheers

 

This item is in stock at our kaki bukit workshop.

[Unique_Motorsports]

The Grip-Lock System - Hold On To Your Ride ($95)

http://i785.photobucket.com/albums/yy135/uniquemotor3/griplock.jpg

 

Grip-Lock is Kiwi ingenuity - a world first. Providing the worlds only motorcycle security device that clamps both throttle and hand brake - instantly. No twist grip - no acceleration. Compact, lightweight and rugged, each Grip-Lock comes with 2 flat blade laser cut keys plus 3 rubber grip inserts for maximum adjustability and perfect fit.

 

Features:Highly visible

Compact (fits easily in pocket, bag or glove compartment)

Self explanatory, quick and easy. If security is easy you'll use it every time.

Laboratory developed and tested to resist extreme impact levels.

Strong yet lightweight. Three hardened steel inserts designed to destroy hacksaw blades.

Fits most scooters, motorcycles and ATV's.

Stops embarrassing falls - Unlike disc locks, you can't forget it's in place, no bending, no disc dirt or street grime.

Highly adjustable variations in use twist grip size and brake lever position - on clutch or brake lever, with brake on or off - while still immobilising the twist grip. Slider allows you to adjust the desired amount of pressure on the brake.

Anti drill, anti pick lock barrel with 50,000 key combinations.

Key not required to lock.

Used on the front brake lever will keep the bike from being pushed off the center or side stand.

Used on the rear brake lever will hold the back tyre from spinning allowing for the loosening or re-torquing of the clutch nut when doing belt, clutch and variator maintenance.

 

Specifications:Grip Guide: Fits 95% of all motorcycles. Twist grip sizes from 27-38mm diameter plus 3 grip inserts of varying sizes.

Keys: 2 flat blade anti-pick keys.

Casing: High pressure injection moulded with 30% glass filled nylon

Reinforcement: Reinforced with 3 x 3.1mm hardened steel rods - specifically designed to be harder than hacksaw blades

Colour: Choose from 5 colours - yellow, red, black, green, pink

Weight: 330g (11.05oz)

Dimensions: 15 cm long x 4.5cm x 5cm (6" x 1-3/4" x 2")

Stainless Steel Pins: Stainless steel hinge and locating pins for weather durability

Raised mounting platform - Protected by raised ring border to prohibit forcible removal

Labelling: High quality poly carbonate identification panels to survive extreme weather (made to endure New Zealands severe weather conditions).