SBF SYM Cafe 2007

[recko]

Originally posted by edwinT@February 09, 2007 08:56 am

its always best not to change anything but as always will itchy butt...

Well, my case is I played with my stock parts until after 10,000km then changed them.

[Dom.C]

Mah Motors selling GTS at $7k oso.Actuali how much should i go during running in?Luz time i always ride manual bikes n the RPM should go pass 3k.Now tis bike when moving off oredi 5-6k n i only hit 65km/h at 6k RPM

[recko]

Originally posted by domchj46@February 09, 2007 09:29 am

Mah Motors selling GTS at $7k oso.Actuali how much should i go during running in?Luz time i always ride manual bikes n the RPM should go pass 3k.Now tis bike when moving off oredi 5-6k n i only hit 65km/h at 6k RPM

Extracted from X9 Cafe which was done by Kenny Seaw on his X9:

 

a) 30 to 50km/h for first 0 to 200km

b) 40 to 60km/h for 200 to 300km

c) 40 to 70km/h for 300 to 500km

d) 50 to 80km/h for 500 to 650km

e) 50 to 90km/h for 650 to 750km

f) 60 to 100km/h for 750 to 900km

g) 60 to 105km/h for 900km to 1000km

h) 70 to 115km/h for 1000km to 1500km

[bryantlin]

thats the method i used to run in my bike also. so far so good

[mybigshow]

Originally posted by recko@February 07, 2007 10:44 am

But I'm talking about color mah... Box can take out anytime one...

Grey w/o box. Cos I feel with spoiler looks better.

[mybigshow]

Originally posted by recko@February 08, 2007 09:55 am

Ok lah, doesn't matter what color is common or uncommon, I'm just joking with him

Most importantly is that you're happy with what you're getting

Bro, joking???

[mybigshow]

Originally posted by bryantlin@February 08, 2007 09:19 pm

there are quite a few dealers for GTS, the sole distributor is Mah Pte.

 

Base on my experience, the stock GTS no need to change or add anything.

Yup, stock already looks very nice, if still wanna mod can go to Future Scootering.

[mybigshow]

Originally posted by domchj46@February 09, 2007 09:29 am

Mah Motors selling GTS at $7k oso.Actuali how much should i go during running in?Luz time i always ride manual bikes n the RPM should go pass 3k.Now tis bike when moving off oredi 5-6k n i only hit 65km/h at 6k RPM

Bro, CONGRATS!!!

 

It's normal lah, but try not to overshot until red zone of rpm lah...

[mybigshow]

Originally posted by edwinT@February 09, 2007 08:56 am

its always best not to change anything but as always will itchy butt...

Scratch if itchy...

[bryantlin]

Originally posted by mybigshow@January 31, 2007 10:07 am

Can post pic of your IU cover?

there you go

 

http://www.picturesky.com/albums/userpics/12777/normal_DSC08428.JPG

 

http://www.picturesky.com/albums/userpics/12777/normal_DSC08427.JPG

 

http://www.picturesky.com/albums/userpics/12777/normal_DSC08426.JPG

 

$10 dollars

[Dom.C]

damn,lidat i overshot the range for 0-200km.i went 65km/h when i left my bike shop...haha...but actually running in suppose to judge using rpm which is the piston speed.N piston cannot rev too fast coz its new n lots of abrasions will occur on the piston n cylinder if not run in properly.Goin slow dangerous oso,d cars tailgate like nothing...knn,tey nvr ride b4.Lucky i drive n ride so i'm biker frenly.

[recko]

I've just remembered that there is one more common problem that GTS200/250 has is that as the digital fuel gauge isn't accurate sometimes. This happened to mine after owning the machine after about 6 to 7 mths. A few times after I topped up to full tank, the meter will read 1 bar lesser. Then after awhile, it went back to full again. But I'm quite used to it already cuz most of the time I'm gauging by mileage. I guess it's the senor inside the fuel tank that's causing this...

 

Oh ya, I think till now, those GTS riders who I know, around 4 (incl. me) already has this issue, not sure about the rest.

[who_noe]

Originally posted by domchj46@February 10, 2007 01:12 am

damn,lidat i overshot the range for 0-200km.i went 65km/h when i left my bike shop...haha...but actually running in suppose to judge using rpm which is the piston speed.N piston cannot rev too fast coz its new n lots of abrasions will occur on the piston n cylinder if not run in properly.Goin slow dangerous oso,d cars tailgate like nothing...knn,tey nvr ride b4.Lucky i drive n ride so i'm biker frenly.

mine oso siao liao

 

god to judge by millage liao...

[recko]

Originally posted by who_noe@February 10, 2007 12:46 pm

mine oso siao liao

 

god to judge by millage liao...

You mean your X9's fuel gauge also like that already ah?

[who_noe]

Originally posted by recko@February 10, 2007 12:56 pm

You mean your X9's fuel gauge also like that already ah?

yeah song song pump full meter all the way up

 

PMS mood minus 1 or 2 bar

 

100km clock..meter at half..

[recko]

The 1st time I kena this problem damn embarrassed. It was when I went in JB caltex for top up, I actually saw the petrol went up to the brim and I stopped pumping and paid the auntie there. After starting my scoot, I was surprised to see that it's not full, so I went to top up again and it's only a little bit, abt 20cts in RM. Only then I recalled this problem which occured to one of the GTS rider. I then paid the auntie again and she shouted to her colleague "20cts also wanna pump!!!"

[who_noe]

Originally posted by recko@February 10, 2007 01:09 pm

The 1st time I kena this problem damn embarrassed. It was when I went in JB caltex for top up, I actually saw the petrol went up to the brim and I stopped pumping and paid the auntie there. After starting my scoot, I was surprised to see that it's not full, so I went to top up again and it's only a little bit, abt 20cts in RM. Only then I recalled this problem which occured to one of the GTS rider. I then paid the auntie again and she shouted to her colleague "20cts also wanna pump!!!"

than tell her mah

 

20 cents no need to charge me la !!

 

20cents not $ ah

[Dom.C]

All along i dun trust fuel gauge.So it's better to judge by ur mileage.

[recko]

Originally posted by domchj46@February 10, 2007 01:27 pm

All along i dun trust fuel gauge.So it's better to judge by ur mileage.

Ya, lesson learnt... So how's your ride?

[bryantlin]

Originally posted by recko@February 10, 2007 12:44 pm

I've just remembered that there is one more common problem that GTS200/250 has is that as the digital fuel gauge isn't accurate sometimes. This happened to mine after owning the machine after about 6 to 7 mths. A few times after I topped up to full tank, the meter will read 1 bar lesser. Then after awhile, it went back to full again. But I'm quite used to it already cuz most of the time I'm gauging by mileage. I guess it's the senor inside the fuel tank that's causing this...

 

Oh ya, I think till now, those GTS riders who I know, around 4 (incl. me) already has this issue, not sure about the rest.

eh mine event worst... before i park the bike got 2 bars...

 

then half hour later i start the bike again the fuel warning came on

 

then ride for abt half KM go back to 2 bars

[Dom.C]

Originally posted by recko@February 10, 2007 01:31 pm

Ya, lesson learnt... So how's your ride?

My ride got a deep scratch on the 1st day...duno hw it got there...n the psasing light not working.Other than these,its ok except for the slow speed during running in.

[Wolfdevil]

Greeting all, been reading this SYM forum for 3 mths till now( older version started by gentoro too), same time riding joyride. Just introducing myself and say hi.

[bryantlin]

Originally posted by Wolfdevil@February 11, 2007 11:04 am

Greeting all, been reading this SYM forum for 3 mths till now( older version started by gentoro too), same time riding joyride. Just introducing myself and say hi.

aloha

 

welcome to the "club"

[rayhunter]

Originally posted by who_noe@February 10, 2007 01:01 pm

yeah song song pump full meter all the way up

 

PMS mood minus 1 or 2 bar

 

100km clock..meter at half..

me experienced that weeks ago too..but after changing the fuel guage already,seems like everything is back to normal..

Are scooters fuel guage(i mean not meter,it's those long tube that is inserted into your fuel tank inlet) looked or worked alike?

[rayhunter]

bryantlin bro,judging from your pic,guess for me to fit my IU,i need to diy a few holes on the pouch..(holes for the cable,holes to screw and mount etc..)