Honda CBR 250R

[W17]

Hi All CBR250R Rider,

Any one downgrade from S4?

What u feel after downgreded.

Pls advise.

[ashiem]

i can't seem to find the rim sizes on the internet..

can someone help me to check on the rim what's the width?

its 17 times something..

 

its 4.0 - 17 for the rear

i'd think its 2.5-17 for the front,

 

just got mine anyway

 

http://img507.imageshack.us/img507/4975/cbr250ride1.jpg

clocked 165kmh on the straight line, reach almost 175kmh downhill..what'd you expect from a 250cc thumper ^^

 

i recently upgraded from a cbr150, peace

[greatmole]

hows the Fuel Consumption like ?

[W17]

Hi All,

Im looking cbr250r rear box racking.

Anyone installed & where can get it?

Understood that install rear box on sport bike look ugly but no choice bcoz not convenient to carry bag & 2nd helmet without it.

 

Other inquiry;

1)Anybody go for dyno hard break in?

2)How many liters for the engine oil?

3)Lowered the bike for easy pushing?

Edited November 13, 2011 by W17

[terry1982]

anyone riding this bike? wanna meet up for coffee session n chat?

[W17]

mine coming nxt week.

do u install rear box & frame slider?

[W17]

Just finished my 1st full tank petrol.

Fuel consumption exactly 10 liters for 311KM.

[W17]

seems not many CBR250R rider. respond lack.

[Fazelino]

Harlooo... Got my babyblade a few months back... the black one.. Downgraded from a Vtec 1... My Vtec was giving some problems even after overhaul.. Guess e wear n tear has taken its toll on e bike..

 

Well... the cbr250, in my opinion, is light, nimble n very economical.. Not much powered if compared to my Vtec, but i would say not too bad.. Was surprised its quite torquey for a 250 single-cylinder four stroke.. Havent really tried my top end but fastest i've gone is 141km/h just by dragging my 6th gear.. pretty impressive, i must say..

 

My babyblade is still fully stock.. Looking for some after-market parts.. G-max bringing in e Leovince but they still havent got it street-legal yet.. I got a very good friend distributing R&G products and I am eyeing on the sliders and tail tidy.. And I will be sending my bike for spray painting real soon.. There's this bugger riding a deuville hit an SYM GTS200 and it fell onto my bike (domino effect).. Poor babyblade suffered dents on the tank and some scratches on its tail n mirrors.. Good thing e CCTV at Mah captured everything.. So managed to claim him for e damages..

 

Guess dats all... Overall, I must say itse ideal bike for me.. Cheers!

[xue ling]

anybody bought the bike at bike shops other than ASP, MAH and Boon Siew? if so, place and price (machine & OTR)?

[greatmole]

anybody bought the bike at bike shops other than ASP, MAH and Boon Siew? if so, place and price (machine & OTR)?

 

up for you !!! i also want to know

[xue ling]

up for you !!! i also want to know

 

i got a PM from bro W17 saying that he bought the bike at bike production, $10500 w/o insurance

[greatmole]

i got a PM from bro W17 saying that he bought the bike at bike production, $10500 w/o insurance

 

thanks for the info

[LOST_53]

hi bro... just my two cents.. dis is wat i heard from my frens.. n wat i heard was these big shops tie dealership with boon siew.. so they got the hondas at a certain price... other shops who dun have dealership with e agent will actually get e bike from e dealers who have dealership with e agent. so these dealers will sell at a slightly higher price den wat e agent initially sold to dem.. so if u do yur math, logically if u wanna get e bike from a smaller shop, its probably pricey.. n furthermore most shops nowadays have e early settlement penalty, ware at e end of e day, they earn further.. shops like Mah, ASP dun have these penalties.. like i said, just my two cents..

[LOST_53]

oh ya... forgot to add.. i dropped by Mah e other day to enquire on the cbr250. tinking of talking my fren into buying one.. so can sub-ride.. hahaha.. they say its 9800 without insurance.. guessed i prove my point.. cheers bros!

[xue ling]

hi bro... just my two cents.. dis is wat i heard from my frens.. n wat i heard was these big shops tie dealership with boon siew.. so they got the hondas at a certain price... other shops who dun have dealership with e agent will actually get e bike from e dealers who have dealership with e agent. so these dealers will sell at a slightly higher price den wat e agent initially sold to dem.. so if u do yur math, logically if u wanna get e bike from a smaller shop, its probably pricey.. n furthermore most shops nowadays have e early settlement penalty, ware at e end of e day, they earn further.. shops like Mah, ASP dun have these penalties.. like i said, just my two cents..

 

i know it's better to get direct from Boon Siew instead but do they have installment plans? pls enlighten me as i have nvr buy a brand new bike since i got my license. When i enquire at ASPhoon, i was told that the got the bike directly from Boon Siew

 

oh ya... forgot to add.. i dropped by Mah e other day to enquire on the cbr250. tinking of talking my fren into buying one.. so can sub-ride.. hahaha.. they say its 9800 without insurance.. guessed i prove my point.. cheers bros!

 

ASPhoon quoted me $8419 w/o COE and insurance. Bike Production quoted me $10500 w/o insurance

[greatmole]

i know it's better to get direct from Boon Siew instead but do they have installment plans? pls enlighten me as i have nvr buy a brand new bike since i got my license. When i enquire at ASPhoon, i was told that the got the bike directly from Boon Siew

 

 

 

ASPhoon quoted me $8419 w/o COE and insurance. Bike Production quoted me $10500 w/o insurance

 

Boon Siew will definitely sell bike more expensive if not those authorise dealer eat grass already....

BTW Boon Siew do provide instalment plans....

 

List of boon siew authorise dealer

http://www.boonsiewhonda.com.sg/boonsiew/dealers.asp?section=motorcycle

[LOST_53]

as far as i am concerned, boon siew doesnt provide installment plans.. if u want to buy under installments, dey will refer u to their dealers.. yew heng group, mah, asp, etc.

 

8419? coe currently is 1481.. dat makes it 9900.. mah still cheaper.. in my opinion, Mah is actually kinda cheap if u getting brand new bikes..

[xue ling]

Boon Siew will definitely sell bike more expensive if not those authorise dealer eat grass already....

BTW Boon Siew do provide instalment plans....

 

List of boon siew authorise dealer

http://www.boonsiewhonda.com.sg/boonsiew/dealers.asp?section=motorcycle

 

i tot they will sell cheaper :lol: since those dealers will raise the price higher so as to earn the profit. din know it's the other way round

 

as far as i am concerned, boon siew doesnt provide installment plans.. if u want to buy under installments, dey will refer u to their dealers.. yew heng group, mah, asp, etc.

 

8419? coe currently is 1481.. dat makes it 9900.. mah still cheaper.. in my opinion, Mah is actually kinda cheap if u getting brand new bikes..

 

ASPhoon told me if i were to purchase the bike now, i'll have to wait till the next coe bidding in Jan 2012 as they do not have pre-bidded coe. if Mah do have pre-bidded coe to register the bike now, den $9800 is still the cheapest deal. let's say coe increase next month, will Mah still keep the price at $9800?

 

btw, Mah quoted $9800 is inclusive of everything else (IU, registration fees, road tax, etc) except for insurance right?

[LOST_53]

i heard Mah do keep pre-bidded COE.. dats y dey can get brand new bikes ready very quick.. but i also heard they will quote price based on current COE, so as to not spoil market..

 

and yes, price is inclusive of everything.. just need to add insurance.. my cuzzun just bought.. hahaha.. dey got no agreement fee, no processing fee, no early settlement penalty also.. not bad.. i tink people have a common misperception of Mah.. their prices are reasonable actually..

[terry1982]

Hi bro, any idea where can i get the R&G product like the tail tidy? have been trying to find it but couldn't! can kindly assist? thank you

Harlooo... Got my babyblade a few months back... the black one.. Downgraded from a Vtec 1... My Vtec was giving some problems even after overhaul.. Guess e wear n tear has taken its toll on e bike..

 

Well... the cbr250, in my opinion, is light, nimble n very economical.. Not much powered if compared to my Vtec, but i would say not too bad.. Was surprised its quite torquey for a 250 single-cylinder four stroke.. Havent really tried my top end but fastest i've gone is 141km/h just by dragging my 6th gear.. pretty impressive, i must say..

 

My babyblade is still fully stock.. Looking for some after-market parts.. G-max bringing in e Leovince but they still havent got it street-legal yet.. I got a very good friend distributing R&G products and I am eyeing on the sliders and tail tidy.. And I will be sending my bike for spray painting real soon.. There's this bugger riding a deuville hit an SYM GTS200 and it fell onto my bike (domino effect).. Poor babyblade suffered dents on the tank and some scratches on its tail n mirrors.. Good thing e CCTV at Mah captured everything.. So managed to claim him for e damages..

 

Guess dats all... Overall, I must say itse ideal bike for me.. Cheers!

[terry1982]

Today just passby wingyap and saw some of the after market parts for cbr250. Wow,i feel that the price are alittle bit too over...Anyway i have a oem black windshield for sale..condition 9/10..selling for $30.. anyone interested can call me at 94881299 for fast deal..thank you

[theinstinctclassic]

anyone can tell me need pull until what rpm then can reach 120km/h?

[W17]

Hi All Bro & Sis,

Anyone change the stock exhaust system & what is the cost/advantage/disadvantage after replaced ?

[W17]

4th gear: 9800 rpm.

5th gear: 8200 rpm.

6th gear: 7100 rpm.

 

anyone can tell me need pull until what rpm then can reach 120km/h?