Honda NSR150SP Riders

[fnee]

Originally posted by yubeng@February 14, 2007 03:31 am

might wana read this

 

http://www.mototuneusa.com/break_in_secrets.htm

sorry but i don't believe that hard run in should be done for a 2 stroker.

 

i think bert did a hard run in on a dyno for his r6 06.

[yubeng]

Originally posted by fnee@February 14, 2007 03:27 am

no need la, if they wanna overtake me in the same lane as i'm in. i'll just press my horn for 3 secs. they'll have two reactions.

 

1. go back to their own lane.

 

or

 

2. blow past me. (which i think they would since they're driving super cars. haha!)

they drive in by force one loh...

mayb sport car got lots of blind spot or simply e drivers r blind...

 

they force u to move away frm lane or risk knockin into their expensive car...

wah u hit them i duno hw many sp u hav to sell to pay for e damange....

[fnee]

Originally posted by yubeng@February 14, 2007 03:33 am

they drive in by force one loh...

mayb sport car got lots of blind spot or simply e drivers r blind...

 

they force u to move away frm lane or risk knockin into their expensive car...

wah u hit them i duno hw many sp u hav to sell to pay for e damange....

if they change lane without due care and knock into your bike, it's their fault. they'll be fined and demerit points will be deducted.

 

i think the TP who comes to the accident scene will be able to judge who banged who. a bike wont' be that stupid to knock into a car, especially a lambo which has a rock hard shell. lol.

 

anyway my horn isn't the stock horn. it's a truck horn! hahaha. must let you guys hear it soon.

[yubeng]

Originally posted by fnee@February 14, 2007 03:32 am

sorry but i don't believe that hard run in should be done for a 2 stroker.

 

i think bert did a hard run in on a dyno for his r6 06.

for infor on jus e part abt e piston ring...not e way of runnin in...

 

mayb this has a better explanation

 

http://www.mattituck.com/articles/engbrkin.htm

[kenNUFC]

anyway i did overhual recently and the mecha changed the follow things

 

engine oil $12

gasket $65

bearing(2) $90

oil seal(1 set) $40

cool oil $10

gear bearing $35

labor charges $80

 

ex?

[yubeng]

Originally posted by fnee@February 14, 2007 03:39 am

if they change lane without due care and knock into your bike, it's their fault. they'll be fined and demerit points will be deducted.

 

i think the TP who comes to the accident scene will be able to judge who banged who. a bike wont' be that stupid to knock into a car, especially a lambo which has a rock hard shell. lol.

 

anyway my horn isn't the stock horn. it's a truck horn! hahaha. must let you guys hear it soon.

u knw i thot of this b4...

its not my fault so if they bang us they r e one who got fined n points deducted...

but hor if really bang i m e one eatin tar le...

they r safely inside their shell....

 

if cases like this happen i wld siam n curse them rather than stay in lane n get knocked...

[LimHammett]

knn!! u all never sleep ah?! i tot im always the only one awake and posting in this forum. hahaha!!

 

btw.. can wait to hear ur horn.. im feeling "horny" to hear ur horns.

 

 

i wanna change my horn also. the one that when u press, it will play a some sort of a tune! hahahah!

[fnee]

Originally posted by yubeng@February 14, 2007 03:40 am

for infor on jus e part abt e piston ring...not e way of runnin in...

 

mayb this has a better explanation

 

http://www.mattituck.com/articles/engbrkin.htm

guess the link provides a better explaination (although very very cheem) of what i was trying to say... proper seal; no compression leakages.

 

i only managed to read the first 2 paragraphs before giving up. lol.

 

yubeng: no rider in the right frame of mind would let a car hit him when travelling @ 100km/h on an expressway. i rather swerve and let that idiot pass rather than claim his insurance.

 

lim: cannot sleep leh. maybe i should go work with you rather spend my time slacking at home. lol. you wanna change musical horn ah? SP can't fit la. lol. my stebel nautilus compact alr need to squeeze until pretty jialat. luckily ah xiong (the other xing hock shop mechanic) help me make a bracket which fits just nice. although this afternoon i rewired the entire thing to make it neater. now just praying that when i wash my bike, the water won't spoil my horn. lol.

 

oh ya you wanna hear my horn you go to yahoo and search stebel horn. go their website, click on the motor cycle icon on the botton left frame and select nautilus compact. there's sample of how the horn sounds like.

 

kenNUFC: your mech use what kind of magical gasket for you?? $65??

[yubeng]

Originally posted by fnee@February 14, 2007 03:44 am

guess the link provides a better explaination (although very very cheem) of what i was trying to say... proper seal; no compression leakages.

 

i only managed to read the first 2 paragraphs before giving up. lol.

yah somethin like tat...

 

someone lookin for technical explanation mah...so give them loh

[yubeng]

Originally posted by LimHammett@February 14, 2007 03:43 am

knn!! u all never sleep ah?! i tot im always the only one awake and posting in this forum. hahaha!!

 

btw.. can wait to hear ur horn.. im feeling "horny" to hear ur horns.

 

 

i wanna change my horn also. the one that when u press, it will play a some sort of a tune! hahahah!

err...wld ppl really notice u in e case of near accident when u "play" those musical horn???

[cOngx]

for singapore. must put...

the horn to say.

 

"the VEHICAL NEAR ME U ARE IN BEING DANGER OF HAVING ME CLAIMING YOUR INSURANCE, HAVING DEMERIT POINTS AND FINE OR MAYBE REVOKING OF UR LICENCE"

 

lim: i cant sleep :cry:

[kenNUFC]

how many types of gasket are there? i also not sure.... lol 65 way too ex? what the usual price then? anyway after doing overhual, the difference i can feel is the vibration of the bike and sound, performance like same same sia.

[LimHammett]

hahaha! welcome to the insomniac club guys..

 

i usually sleep at 6am everyday after reaching home from work after 2am..

 

yubeng: if its already "near" accident, sounding the horn wont make any difference. u tink the first reaction when u encountered a near accident is to horn first or try to avoid it? im sure its the latter..

 

KenNUFC: maybe its a titanium gasket.. like Xibit loves to say in Pimp My Ride "You've been CHOPPED!"..

 

congX and fnee: maybe u guys should work at my place lah.. since u all cant slp.. like samuel said.. better work than slack at home!

 

[fnee]

Originally posted by kenNUFC@February 14, 2007 04:03 am

how many types of gasket are there? i also not sure.... lol 65 way too ex? what the usual price then? anyway after doing overhual, the difference i can feel is the vibration of the bike and sound, performance like same same sia.

do you know that you can get a sheet of gasket paper (think that's what it's called) for less than $10 and cut out your own gasket? and i think it's A4 in size.

 

your bike is suppose to run smoother after the overhaul since your old bearings were worn. performance wise i'm not sure though.

 

this is the kind of technical discussion that i love heh. better than the endless pages of TCSS.

 

but there must be jokes too la.

 

good night all

[LimHammett]

Originally posted by fnee@February 14, 2007 04:19 am

do you know that you can get a sheet of gasket paper (think that's what it's called) for less than $10 and cut out your own gasket? and i think it's A4 in size.

 

your bike is suppose to run smoother after the overhaul since your old bearings were worn. performance wise i'm not sure though.

 

this is the kind of technical discussion that i love heh. better than the endless pages of TCSS.

 

but there must be jokes too la.

 

good night all

cut ur own gasket?? woah.. no thanks man for me.. scared if i cut it wrongly or wat, den jialat ah..

 

it tink the gasket is from a material called abestos..(not sure if i got the spelling rite.. but the pronunciation is there)..

 

[Hong88]

Originally posted by fnee@February 14, 2007 03:39 am

if they change lane without due care and knock into your bike, it's their fault. they'll be fined and demerit points will be deducted.

 

i think the TP who comes to the accident scene will be able to judge who banged who. a bike wont' be that stupid to knock into a car, especially a lambo which has a rock hard shell. lol.

 

anyway my horn isn't the stock horn. it's a truck horn! hahaha. must let you guys hear it soon.

ur horn very hiang .. already say liao..u horn TP also must siam

[flykite]

Originally posted by kenNUFC@February 14, 2007 03:42 am

anyway i did overhual recently and the mecha changed the follow things

 

engine oil $12

gasket $65

bearing(2) $90

oil seal(1 set) $40

cool oil $10

gear bearing $35

labor charges $80

 

ex?

wat bearing and wat cool oil??

 

[yenyenpark]

Originally posted by kenNUFC@February 14, 2007 03:42 am

anyway i did overhual recently and the mecha changed the follow things

 

engine oil $12

gasket $65

bearing(2) $90

oil seal(1 set) $40

cool oil $10

gear bearing $35

labor charges $80

 

ex?

engine oil $12 (standard)

gasket $65 (EX lor.. i think gasket quite cheap)

bearing(2) $90 (never changed.. dunno)

oil seal(1 set) $40 (dunno oso)

cool oil $10 (issit coolant?)

gear bearing $35 (dunno too)

labor charges $80 (does it include cleaning ur parts)

 

 

overall it seems to me it's CNY price.. kind of at high price.. save the money if u haben do it.. if done liao, try recoup it at CNY.. buy u bike number now..

 

 

PS: will it consider overhaul if the piston, block, conrod etc not changed??

[Powieee]

anyway my horn isn't the stock horn. it's a truck horn! hahaha. must let you guys hear it soon.

 

now alot of power is packed behind the small "horn" button . With great power , comes great responsibility . You might just kill a ah ma or ah gong . haha ..

[yenyenpark]

Originally posted by fnee@February 14, 2007 04:19 am

do you know that you can get a sheet of gasket paper (think that's what it's called) for less than $10 and cut out your own gasket? and i think it's A4 in size.

 

your bike is suppose to run smoother after the overhaul since your old bearings were worn. performance wise i'm not sure though.

 

this is the kind of technical discussion that i love heh. better than the endless pages of TCSS.

 

but there must be jokes too la.

 

good night all

engine gasket i wont cut even i know how..

 

but pipe gasket think i will.. i saw the mec at ah chong helped me do one on my pipe.. ah ping from XHM said me to buy one.. but Planet Motor mec helped cut one and fix it.. and it worked.. FOC

[yubeng]

Originally posted by yenyenpark@February 14, 2007 09:27 am

engine oil $12 (standard)

gasket $65 (EX lor.. i think gasket quite cheap)

bearing(2) $90 (never changed.. dunno)

oil seal(1 set) $40 (dunno oso)

cool oil $10 (issit coolant?)

gear bearing $35 (dunno too)

labor charges $80 (does it include cleaning ur parts)

 

 

overall it seems to me it's CNY price.. kind of at high price.. save the money if u haben do it.. if done liao, try recoup it at CNY.. buy u bike number now..

 

 

PS: will it consider overhaul if the piston, block, conrod etc not changed??

i thot overhaul only means to dismantle for repairs...

nothing abt new piston or block...

[Guest SPchoo]

gasket for $65 ? siao liao lah... your gasket maybe buddha or jesus got use before thats why so expensive.

 

yubeng: no lah. overhaul means change the parts. take out and repair is called repair. LOL

[cOngx]

Originally posted by SPchoo@February 14, 2007 11:53 am

gasket for $65 ? siao liao lah... your gasket maybe buddha or jesus got use before thats why so expensive.

 

yubeng: no lah. overhaul means change the parts. take out and repair is called repair. LOL

i selling gasket for $650.

 

if u buy means u are the cabbage i am the chopper

[jerkybeef]

xinghock open now ?

[Guest SPchoo]

Originally posted by jerkybeef@February 14, 2007 12:47 pm

xinghock open now ?

are u going now ?