Honda NSR150SP Riders

[lwfc]

ask ah duck text me also `

 

ask ah duck text me also

[jsoneng]

Sorry for your incident.. But anyway the rpm you mention that will feel powerless when passing 5k mark is normal.. Mines like this too,

Some people said its the timing where the 'valve' open or some people say that's how sp works, but however there are some of my friends whereby they have the powerless or 'choking' feel at a earlier rpm or later than 5k rpm, it can be adjusted like some people say, high rev setup or low rev setup.

 

So de choking feel is normal? But I feel power goin slowly til 4+den de choking feel kicks in n the bike seems powerless n I try to throttle more til it past 5+ den a sudden burst of speed on my bike.. which is kinda dangerous.. is tt normal?? Btw, the show me my engine inside got few minor scratches, does it affect meaning my whole block hv to change? Someone advise me arh.. thanks..

[wait4me]

no worries la , the sp is made that way,

and that kind of power , not even power lo

[gnk_dj]

Heyyy guys any of u have throttle cable and housing to let go?

[CoOLdAy]

hi everyone!!!

[lwfc]

my sp goes pehh pehh pehhh

[augu3tz]

Congrats to u. So Wat bike r u planing to ride?

 

haha thanks. got an sp on the 16 as well .=)

[wait4me]

haha thanks. got an sp on the 16 as well .=)

pass date 1611

buy bike plate 1611 ,

 

huat ah

[simon85]

:lol:

[lemontree123]

Hey friends

 

I am looking to mount a wider rear wheel on my NSR150SP similar to this modification project:

 

http://tyga-performance.com/site/index.php?cPath=73_863

 

Has anyone done this before? I asked my local shop (Sydney, Australia) and they suggested it will be an expensive modification. But according to the link on Tyga website, minor mods were implemented to make it work. I really want this!

 

Thanks =)

[Absolute Lancer]

haha thanks. got an sp on the 16 as well .=)

 

Waw, that very fast... I buy my bike 4 months after I passed.

[jsoneng]

no worries la , the sp is made that way,

and that kind of power , not even power lo

 

meaning all SP bikes feel powerless around rpm5? but previously mine seems ok.. now after hving full service it seems worse.. =S

[jsoneng]

any1 know where around ang mo kio/ubi area can fine tune my honda sp?

[simon85]

Andy project motors~~ @ 10 kaki bukit rd 2 First East Centre

[jsoneng]

Andy project motors~~ @ 10 kaki bukit rd 2 First East Centre

 

what time they open ar? and roughly how much it cost? i just want set my rpm to more smooth only.. lols.

[lwfc]

Hey friends

 

I am looking to mount a wider rear wheel on my NSR150SP similar to this modification project:

 

http://tyga-performance.com/site/index.php?cPath=73_863

 

Has anyone done this before? I asked my local shop (Sydney, Australia) and they suggested it will be an expensive modification. But according to the link on Tyga website, minor mods were implemented to make it work. I really want this!

 

Thanks =)

 

they mentioned it was a MC28 hub.

[wait4me]

what time they open ar? and roughly how much it cost? i just want set my rpm to more smooth only.. lols.

u go jb do then u wan go sg do ,

then soon u go jb do ...

wa everything messy leh

[jsoneng]

u go jb do then u wan go sg do ,

then soon u go jb do ...

wa everything messy leh

 

hahahs.. i not goin in jb tt soon mahz.. now it seems that my bike like "chap bah lang" liao.. lols..

[Absolute Lancer]

Hey friends

 

I am looking to mount a wider rear wheel on my NSR150SP similar to this modification project:

 

http://tyga-performance.com/site/index.php?cPath=73_863

 

Has anyone done this before? I asked my local shop (Sydney, Australia) and they suggested it will be an expensive modification. But according to the link on Tyga website, minor mods were implemented to make it work. I really want this!

 

Thanks =)[/quote

 

Hi, Wat tyre size are u looking at? I am running on 120/80 for my rear.

[wait4me]

hahahs.. i not goin in jb tt soon mahz.. now it seems that my bike like "chap bah lang" liao.. lols..

u can look for andy ba , try go ard late afternoon , he should be open ..

[augu3tz]

any bros know how to change the lights in the speedo meter?

[wait4me]

any bros know how to change the lights in the speedo meter?

sorry but i have never touch a single thing on my bike

[jsoneng]

u can look for andy ba , try go ard late afternoon , he should be open ..

 

lols.. ohh.. now i jus realised my rear brake also cant brake liao.. =S

[lemontree123]

Hey friends

 

I am looking to mount a wider rear wheel on my NSR150SP similar to this modification project:

 

http://tyga-performance.com/site/index.php?cPath=73_863

 

Has anyone done this before? I asked my local shop (Sydney, Australia) and they suggested it will be an expensive modification. But according to the link on Tyga website, minor mods were implemented to make it work. I really want this!

 

Thanks =)[/quote

 

Hi, Wat tyre size are u looking at? I am running on 120/80 for my rear.

 

120/80 is standard and is what I am running too. I want to run something similar to the modified project in Tyga (160/60 x 17" rear rim).

 

they mentioned it was a MC28 hub.

 

Where can I get this?

 

Thanks for the input so far. I really want to get this rear wheel

[simon85]

sorry but i have never touch a single thing on my bike

 

u refering to project motors andy in kaki bukit?