SYM GTS200 group

[mudai]

High pitch while accelerating ? It the gear components inside the gear box.

[mudai]

Is the sound like this one ? Watch "Kymco 125 CVT noise" on YouTube - Kymco 125 CVT noise:

[mudai]

To open the cvt cover you need 8pm socket and 10mm socket for screw that attached to air filter

[ibudiman]

It's worst than that mudai.

I think something from my kick start fell off or broken inside the cvt.

 

I have the 10mm screw. But haven't found the 8pm socket yet.

Any idea where can i found it?

[mudai]

You can go to kelantan lane. Lots of hardware shop there. Or alltools at lavender.

[ibudiman]

How come i forgot those places. Will go there tomorrow. Thanks mudai!

[mudai]

Sure. Buy 8pm socket with 3/8 or 1/2 and a ratchet.

[sanseiu]

need some help again guys

 

wanted to go out but my bike could not start. changed the spark plug and it is still unable to start. when i press the electric ignition button and hold it down, there is a clicking sound. anyone knows what problem is this?

 

seems like gotta call for tow truck to tow it down to A.C Motors again

[0401897D]

Hav u tried kick start?

 

 

Sent from my iPhone using Tapatalk

[sanseiu]

Hav u tried kick start?

 

 

Sent from my iPhone using Tapatalk

 

sure did bro. unable to start

[MiloJay]

Just a wild guess, maybe fuse need to change?

 

Sent from my GT-N7105 using Tapatalk

[mudai]

Click sound is could be from starter motor. If not starting could be few reason. No sparks or piston jammed

[ibudiman]

Finally fixed my problem.

8mm socket and screw driver open up the CVT.

19 mm socket to tighten up the bolt.

 

Apparently the bolt for the variator is loosen.

I'm just wondering if it's not tighten enough when a bike shop changed my belt and variator.

sigh...

Edited April 7, 2014 by ibudiman

[mudai]

That is dangerous.

[ibudiman]

well bro...

 

that is not so dangerous if you compare to this....

 

my exhaust dropped on the street!

can u imagine that?

 

I stopped on the left side, picking up the exhaust using my jacket.

I noticed the 3 bolts connecting the exhaust to the body are missing.

 

Few days before it happened, i went to a bike shop fixing something that requires to open the exhaust.

In the morning before it happened, I went to STA to do inspection.

In the evening, I went to Expo.

When going back home, it happened.

 

So, how could that be happened to me?

 

I've come to one conclusion. but i'll keep it for me.

 

I'll let ur imagination go wild.

[mudai]

If its tighten using impact wrench. It should be sturdy enough. Maybe ghosts peeling of the bolts

[ibudiman]

hahaa... that could be one of the reason...

 

Leason learnt, always check the exhaust still intact before leaving car park.

[sym_ed]

my friend's bike also exhaust drop while riding....

[jrbrand]

Can the freeplay of the throttle be adjusted?

[mudai]

Yes. The throttle cable have its adjustment . There are some round plastic nut just below the throttle at the cable

[sym_ed]

any recommended place to change tyres for our bike?

[mudai]

Depends on which tyre you choose. So far for Michelin citygrip lab and future scootering is the cheap one. Lab 80sgd for rear . Future 85 for rear. All not here quoting 100+ .

[sanseiu]

turned out to be a battery problem.

 

Battery $60

Tow $30

Full Service $170

 

and to sym_ed, i changed my rear tyre at A.C Motors $85. forgot what brand...

[sym_ed]

Depends on which tyre you choose. So far for Michelin citygrip lab and future scootering is the cheap one. Lab 80sgd for rear . Future 85 for rear. All not here quoting 100+ .

 

so, in total how much is the damage? both front n rear?

 

btw where is these two w/s?

[0401897D]

so, in total how much is the damage? both front n rear?

 

btw where is these two w/s?

 

https://www.google.com/search?q=future+scootering&ie=UTF-8&oe=UTF-8&hl=en-gb&client=safari

 

 

 

 

Sent from my iPhone using Tapatalk