Honda RVF400/NC35

Ken · June 4, 2003

Just like to check with you guys,wat is the normal RPM to go up to before you change to the next gear?
I always do it at around 6000 for normal riding,is that ok?

that is consider fast okie.

martini · June 4, 2003

that is consider fast okie.

So wat is the normal RPM before you switch to the next gear??

Ken · June 4, 2003

So wat is the normal RPM before you switch to the next gear??

that will depends on where u r travelling at and see got cars anot lah.

for me, no cars is oso 6k rpm lah.

hahaha

but when i reach 6th gear,is oso 6000rpm lor. dun wanna open valve at 7.

dun care normal or not lah, u like can liao.

everyone different.

safety comes first of course.

martini · June 4, 2003

that will depends on where u r travelling at and see got cars anot lah.
for me, no cars is oso 6k rpm lah.
hahaha
but when i reach 6th gear,is oso 6000rpm lor. dun wanna open valve at 7.
dun care normal or not lah, u like can liao.
everyone different.
safety comes first of course.

At 6000 on the sixth gear it is normally around 100 right? Oh....i never knew the valve opens at 7000!!

Ken · June 4, 2003

At 6000 on the sixth gear it is normally around 100 right? Oh....i never knew the valve opens at 7000!!

that will depends on your spockets and yes, at 7rpm ur valves open n u will feel a bit restricted before u reach 7rpm.

haven open b4?

koonz liao

dlm · June 5, 2003

So wat is the normal RPM before you switch to the next gear??

Normally I change gear around 4 to 5 rpm. sometime less, sometime high.

As long as regular service eg. change engine, oil filter shouldn't be any problem.

dlm · June 5, 2003

hey guys, sorry din go the last outing with u all.. anyway i very pek chek..some ass stole my headlight covers...i think some of u all knew i got a tinted headlight covers and now someone stole it from me..at bugis juction carpark...so let me know if u all seen it on other Rvfs okie..if not help me take back if possible...hehehe..

Becareful to park in bugis junction carpark..heard alot of things stolen b4..din expect to kena also..

:cry: :cry:

It always the case.... when c ppl got they dun have, how........... Steal loh. This is singapore. Tat y always try to park ur bike where ppl can be seen.

ppl like steal small things like.... eg. key rubbber (back seat), safety pin cap (pro arm), not to mention big things like air vent, fairing, muffler protector.....

Take care.....

dlm · June 5, 2003

my idling adjust higher liao...
today not bad....
start at 1 try in e morning
and 2 tries in e afternoon...

anyway is anyone interested in e sliders???
if not i tell my fren tat im not getting from him..
anyway $60 f0r 2, motovation (brand) without installation

$60 is cheap, but how much will unity charge for workmanship? If total cost more than $80, better get from unity rite

I confirm getting.....Can help us find out more? thanks

BuZZBeaM · June 5, 2003

$60 is cheap, but how much will unity charge for workmanship? If total cost more than $80, better get from unity rite

I confirm getting.....Can help us find out more? thanks

ok no problems

mayb my fren can recommend where to do it

keOnni · June 5, 2003

that will depends on where u r travelling at and see got cars anot lah.
for me, no cars is oso 6k rpm lah.
hahaha
but when i reach 6th gear,is oso 6000rpm lor. dun wanna open valve at 7.
dun care normal or not lah, u like can liao.
everyone different.
safety comes first of course.

rvf got 7k open valve 1 meh? i tot de power is gradual?

6000 veli fast wOr..i 4th gear u cannot see cars on ur mirror liao..wahhaha

keOnni · June 5, 2003

Normally I change gear around 4 to 5 rpm. sometime less, sometime high.
As long as regular service eg. change engine, oil filter shouldn't be any problem.

and i read it at factorypro webby...if u owaes keep de rpm low...it will spoilt ur carb or sumthin...i dunnoe wads dat...

den it will make ur bike nearly impossible to tune..

so lets keep our rpm at 10000!!!!

keOnni · June 5, 2003

u wanna do at where?
sure got significant improvement anot?
how to tell if your bike got such things done on it b4 anot huh?
will it be noticable in sound level or change in sound?
how much?

:confused: :confused: :confused: :confused:

no change in sound.. better midrange onlie lorx.. and pickup faster...

midrange is at 8k lidat..

dlm · June 6, 2003

and i read it at factorypro webby...if u owaes keep de rpm low...it will spoilt ur carb or sumthin...i dunnoe wads dat...
den it will make ur bike nearly impossible to tune..
so lets keep our rpm at 10000!!!!

haha.....

at 10000rpm, I think properly running at about 150km/h liao. Speeding !!!

Anyway RVF is a high rev bike, so dun worry too much. Honda engine always trustful

martini · June 6, 2003

Got a question concerning the RVF one seater installation.

Would the rider seat be expanded or would it still remain the same size??

BuZZBeaM · June 6, 2003

rvf got 7k open valve 1 meh? i tot de power is gradual?
6000 veli fast wOr..i 4th gear u cannot see cars on ur mirror liao..wahhaha

wah seh...

wat's ur speed at 4th gear?

dlm · June 7, 2003

Got a question concerning the RVF one seater installation.
Would the rider seat be expanded or would it still remain the same size??

No matter which type of one seater u change, the rider seat still remain the same. This is due to the frame of our tail. We can't possibly lengthen the rider's seat, unless......... u cut off the metal frame of the pillion. Then is possible......

Ken · June 7, 2003

rvf got 7k open valve 1 meh? i tot de power is gradual?
6000 veli fast wOr..i 4th gear u cannot see cars on ur mirror liao..wahhaha

yeah!~ everytime i reach 6500rpm, there is a force resisting, then when reach 7rpm only, it is very smooth and the power just keep coming, hard to control. that time, accelerate even faster.

keOnni · June 7, 2003

haha.....

at 10000rpm, I think properly running at about 150km/h liao. Speeding !!!

Anyway RVF is a high rev bike, so dun worry too much. Honda engine always trustful

nvm la...use gear 4 all de way~!!!

lOlx...ok...i'm juz craping...ignore me..

keOnni · June 7, 2003

wah seh...
wat's ur speed at 4th gear?

dunnoe lei... 6000 at 4th gear...erm... 70+?

i not sure lei..

keOnni · June 7, 2003

yeah!~ everytime i reach 6500rpm, there is a force resisting, then when reach 7rpm only, it is very smooth and the power just keep coming, hard to control. that time, accelerate even faster.

chim lei.. mine at 8000 becoz of de factory jets..

June 8, 2003

argh.... some idiot stole my air intake... shitz.... any idea how much that two plastic cost? and where can i buy it?

martini · June 8, 2003

argh.... some idiot stole my air intake... shitz.... any idea how much that two plastic cost? and where can i buy it?

Wah complicated....never knew ppl so desparate,air intake the two piece of plastic also steal!!!!! I better watch out for mine!!

BuZZBeaM · June 8, 2003

Wah complicated....never knew ppl so desparate,air intake the two piece of plastic also steal!!!!! I better watch out for mine!!

yeah u should...

and e rubber at e air vent.. potential item for those stealers..

anyway how do u guys clean ur pipe?

no matter how i clean.. still not clean leh

June 8, 2003

) RvF^K3L(22) [Katong] (Rider Veri Fat)

2) DLM(25) [Redhill] (Rider Veri Frustrate)

3) keOnni (20yrs 1mth and 3 days old) (FP Plate, Cabin Honda paintwork) [bt batOk]

4) BruiseLee ( 25 ) [ Taman Jurong ] ( Rider Veri Funny )

5) rvf_boi (23)

6) jeffreylim (25)

7) super69lover (22)

8) ET (26)

9) Sunny6110 (22) [bendemeer]

10) Ken (22) [bukit Panjang] (Rider Very FaFu)

11) Policehunter (27) [balestier]

12) Oldfart (30) [Ghim Moh]

13) KeiHin99 (24) (Original Paintwork, FM)[Hougang]

14)7676(26)@pasir ris

15) Martini (22) Serangoon

16) HuatKueh (20) Serangoon

17)EvilErnie East Coast

18) BuZZBeaM (22) [cck]

19) harada (24) tampinese

20)Ise (23)(Queenstown)(FS Original paintwork)

Hihi!New RVF rider here.Hope to learn more about the bike from the seniors here.See u guys in the future outings soon.

martini · June 8, 2003

) RvF^K3L(22) [Katong] (Rider Veri Fat)
2) DLM(25) [Redhill] (Rider Veri Frustrate)
3) keOnni (20yrs 1mth and 3 days old) (FP Plate, Cabin Honda paintwork) [bt batOk]
4) BruiseLee ( 25 ) [ Taman Jurong ] ( Rider Veri Funny )
5) rvf_boi (23)
6) jeffreylim (25)
7) super69lover (22)
8) ET (26)
9) Sunny6110 (22) [bendemeer]
10) Ken (22) [bukit Panjang] (Rider Very FaFu)
11) Policehunter (27) [balestier]
12) Oldfart (30) [Ghim Moh]
13) KeiHin99 (24) (Original Paintwork, FM)[Hougang]
14)7676(26)@pasir ris
15) Martini (22) Serangoon
16) HuatKueh (20) Serangoon
17)EvilErnie East Coast
18) BuZZBeaM (22) [cck]
19) harada (24) tampinese
20)Ise (23)(Queenstown)(FS Original paintwork)

Hihi!New RVF rider here.Hope to learn more about the bike from the seniors here.See u guys in the future outings soon.

Welome to the group,good to see more and more RVF riders.

Sign In

Join SingaporeBikes.com today! Where Singapore Bikers Unite!

Honda RVF400/NC35

Recommended Posts

Ken

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

martini

Ken

martini

Ken

dlm

dlm

dlm

BuZZBeaM

keOnni

keOnni

keOnni

dlm

martini

BuZZBeaM

dlm

Ken

keOnni

keOnni

keOnni

Guest KeiHin99

martini

BuZZBeaM

Guest Ise

martini

Join the conversation

Latest Topics

LF GSR 400 Lta Legal Exhausts

Looking for GSR 400 part

KTM RC200

Suzuki burgman 650 rider experience

E-bike vs Electric Motorcycle in Singapore