[Group] YAMAHA RXZ

[blurchaoz]

hey guys, u know where to get high speed bearings?

cn recomend me some shops which are reliable to go fix this thing up?

 

just now one guy suddenly listen to my engine of my bike and said that i need to change the bearing and recomend me high speed bearings.

his age, i guesss, is arnd my dad's age bt slightly older. nice friendly guy.

must hav been a racer in his younger years.

 

wakakaka! high speed bearing kape??.... there are afew different type of speed bearing macha take your pick. get more info from all the mechanics you always visit.

 

life span of high speed bearing is 12 months recommended.

getting high speed bearing is easy but knowing the following sizes for the bearings going to be hard unless you got a mechanic who is good enuf to tell you the size.

 

if you got the extra cash to fork out and want to experience them then go ahread but if you thinking of changing to a KRR then forget about it and try not to do up anything more to your bike for the time being. my SGD$0.02 worth of oppinion. but i can tell you the feeling is shiok and superb!!!

 

JUST FINISH RUNNING IN at 1500km(below 80km/h and rpm 5) LIAO!!! philip quick finish up your running in...

*

[blurchaoz]

hey hey, when u doing your bike cn contact me?

wanna try diy tooo.

 

okiesz no problem.. but usually it will be like around 10pm-2am like tat. anything i will gif you a beep...

[blurchaoz]

hey hey, when u doing your bike cn contact me?

wanna try diy tooo.

 

okiesz no problem.. but usually it will be like around 10pm-2am like tat. anything i will gif you a beep...

[mnh_87]

Hi there im new here, i need help. im currently using 18inch sports rims for my bike but i want to change to 17 inch sport rims.. i went to ask a few mechanics and have mixed suggestion.. one says that its better to use 18 inch alloy.. and the other said 17 inch better.. what gives? can someone enlightened me on these..

[stwb1981]

any idea abt the pricing of the new rxz meter...

the 1 wif white background for the tachometer...?

or any 1 selling ?

new or old type but nt the japan z type

cheers.....

 

finally gt my Z bck fr msia juz nw...

nw start to run in...

change my piston polish my block

con rod & all engine bearings.....

& of course accessories....

keke..... run in run in haiz.....

[PHILIP79]

haha your not crazy bro. i do just the same.. and its true.. they have feelings too.. most old timer advice me..

 

 

 

haha tat means your not crazy enough for your z.. dont believe try to say infront of her u wanna change bike or sell her off.. then u may experience the bad luck from then on..

 

 

 

hahaha the clock post page hunter is at it again.. wat lah u all the guys knew bout my sales thread cos i did inform them thru here.. only u never see bro..

 

Man I just missed the great sales of ur... Ha Ha Ha... I just saw ur coverset and I liked it but too bad cos syamitomo is having it and if fit on my bike then my bike look like new one lor.... My bike had been resprayed on the engine and block plus the frame and I just rewrapped my seat....

 

wakakaka! high speed bearing kape??.... there are afew different type of speed bearing macha take your pick. get more info from all the mechanics you always visit.

 

life span of high speed bearing is 12 months recommended.

getting high speed bearing is easy but knowing the following sizes for the bearings going to be hard unless you got a mechanic who is good enuf to tell you the size.

 

if you got the extra cash to fork out and want to experience them then go ahread but if you thinking of changing to a KRR then forget about it and try not to do up anything more to your bike for the time being. my SGD$0.02 worth of oppinion. but i can tell you the feeling is shiok and superb!!!

 

JUST FINISH RUNNING IN at 1500km(below 80km/h and rpm 5) LIAO!!! philip quick finish up your running in...

*

 

Cool man... Congrats... I just reached 600+km milleage and 60% more to go.... Hope to clear by this month... Cheers

 

Hi there im new here, i need help. im currently using 18inch sports rims for my bike but i want to change to 17 inch sport rims.. i went to ask a few mechanics and have mixed suggestion.. one says that its better to use 18 inch alloy.. and the other said 17 inch better.. what gives? can someone enlightened me on these..

 

If u get 17 inch rims then u got more choice for tyre and for 18 inch the tyre are limited but good for milleage if I am not mistaken....

 

any idea abt the pricing of the new rxz meter...

the 1 wif white background for the tachometer...?

or any 1 selling ?

new or old type but nt the japan z type

cheers.....

 

finally gt my Z bck fr msia juz nw...

nw start to run in...

change my piston polish my block

con rod & all engine bearings.....

& of course accessories....

keke..... run in run in haiz.....

 

Welcome to the club of running in.... Ha Ha Ha... Only left me cos blurchao just finished his running in....

[aishaan]

wakakaka! high speed bearing kape??.... there are afew different type of speed bearing macha take your pick. get more info from all the mechanics you always visit.

 

life span of high speed bearing is 12 months recommended.

getting high speed bearing is easy but knowing the following sizes for the bearings going to be hard unless you got a mechanic who is good enuf to tell you the size.

 

if you got the extra cash to fork out and want to experience them then go ahread but if you thinking of changing to a KRR then forget about it and try not to do up anything more to your bike for the time being. my SGD$0.02 worth of oppinion. but i can tell you the feeling is shiok and superb!!!

 

JUST FINISH RUNNING IN at 1500km(below 80km/h and rpm 5) LIAO!!! philip quick finish up your running in...

*

 

wah, u make me dun wanna change bike already. haha.

wah now after running in, cn "train" your bike very hard already rite?

[PHILIP79]

Thanks to the fellow mentioned bikers who went into JB via 1st link for Petronas Petrol and supper at Lorong Bapok

1) syamitomo

2) Chin

3) Engineer

Plus we met ENO who is long lost from the forum...

[ady_52]

wakakaka! high speed bearing kape??.... there are afew different type of speed bearing macha take your pick. get more info from all the mechanics you always visit.

 

life span of high speed bearing is 12 months recommended.

getting high speed bearing is easy but knowing the following sizes for the bearings going to be hard unless you got a mechanic who is good enuf to tell you the size.

 

if you got the extra cash to fork out and want to experience them then go ahread but if you thinking of changing to a KRR then forget about it and try not to do up anything more to your bike for the time being. my SGD$0.02 worth of oppinion. but i can tell you the feeling is shiok and superb!!!

 

JUST FINISH RUNNING IN at 1500km(below 80km/h and rpm 5) LIAO!!! philip quick finish up your running in...

*

 

fuyoooooo high speed bearing dok.....walau eh.....

[ady_52]

ady_52 Wish u a speedy recovery....

 

thks man....me really need the speedy recovery

[ady_52]

Argh!!!!!!!!!!!!!boring!!!!!!!!!!!!!!!!!!!!!!!

[ady_52]

can somebody bring me out hahahahaha

[blurchaoz]

can somebody bring me out hahahahaha

 

alamak macha today i werking lar... or else can bring you out jalan2....

[blurchaoz]

any idea abt the pricing of the new rxz meter...

the 1 wif white background for the tachometer...?

or any 1 selling ?

new or old type but nt the japan z type

cheers.....

the new RXZ meter cost $220 at auto machinery located at ROWELL ROAD.local $80 at ban hoe leong (jalan besar plaza)

 

Hi there im new here, i need help. im currently using 18inch sports rims for my bike but i want to change to 17 inch sport rims.. i went to ask a few mechanics and have mixed suggestion.. one says that its better to use 18 inch alloy.. and the other said 17 inch better.. what gives? can someone enlightened me on these..

 

17inch got more choice of tyres to pick from. but the bad side is your FC is totally high. most of us here using 18inch.

 

wah, u make me dun wanna change bike already. haha.

wah now after running in, cn "train" your bike very hard already rite?

 

firstly need to adjust myself due speed.... cos im getting use to riding at 80km/h. ahakz.

[mnh_87]

17inch got more choice of tyres to pick from. but the bad side is your FC is totally high. most of us here using 18inch..

 

erm whats FC? so u recommend 18 inch? what type of rims are u using rite now?

[blurchaoz]

erm whats FC? so u recommend 18 inch? what type of rims are u using rite now?

 

fuel consumption(FC). im using mito-x sport rim 18 inch.

[Guest }VIRUS{]

wah, u make me dun wanna change bike already. haha.

wah now after running in, cn "train" your bike very hard already rite?

 

bro hows ur 2a?pass oredi?

[mnh_87]

fuel consumption(FC). im using mito-x sport rim 18 inch.

 

mito-x..how much does it cost? alloy rims is it? what tires are u using? is ur avatar pic ur bike?

[blurchaoz]

mito-x..how much does it cost? alloy rims is it? what tires are u using? is ur avatar pic ur bike?

 

can't remember how much it is. using tt900 front and back. i cant remember the price cos i did them 8 months back.. the avatar pic is my bike.

[mnh_87]

can't remember how much it is. using tt900 front and back. i cant remember the price cos i did them 8 months back.. the avatar pic is my bike.

 

oh ok, so any ideas where i can get mito-x rims in singapore, with reasonable price?

[blurchaoz]

oh ok, so any ideas where i can get mito-x rims in singapore, with reasonable price?

 

singapore i not very sure. if im not wrong i saw it at HUA CHIN aka AH KUN at bukit batok crescent. can try check it over there.

[mnh_87]

singapore i not very sure. if im not wrong i saw it at HUA CHIN aka AH KUN at bukit batok crescent. can try check it over there.

 

oh ok.. thanks a lot bro.. been a great help..

[aishaan]

the new RXZ meter cost $220 at auto machinery located at ROWELL ROAD.local $80 at ban hoe leong (jalan besar plaza)

 

 

 

17inch got more choice of tyres to pick from. but the bad side is your FC is totally high. most of us here using 18inch.

 

 

 

firstly need to adjust myself due speed.... cos im getting use to riding at 80km/h. ahakz.

 

 

 

alamak i think i using 17 inch le. bt why my fc still quite ok ok.

hmmmm.

 

btw happy adjusting to higher speeeds. if i see a bee-like bike buzzing arnd. then i know who's the rider.

[aishaan]

bro hows ur 2a?pass oredi?

 

oh ya last time u said you also taking 2a test same time as me right?

forgot to look out for your greeeen bike.

Alhmdllh passs. was the second last of the batch. only one guy younger then me.

 

how abt you?

[aishaan]

alamak i think i using 17 inch le. bt why my fc still quite ok ok.

hmmmm.

 

btw happy adjusting to higher speeeds. if i see a bee-like bike buzzing arnd. then i know who's the rider.

 

oh ya just rememberd. talking abt beees.

somebody else suggest that i get the rxz pipe with the bee-like sound.

he says it will make my bike go faster and smooother.

and also make the sound very very nice.

he said cn make it somewhere at eunos where alot of bike shops are but abit ex.

 

any comments abt this pipe and anybody done this before?

Tempting.