[Group] YAMAHA RXZ

[xaviervax]

Guys will there be any meet up soon? like Kopi session

Wanting to meet more riders and friends. Kinda isolated from social world always sch and work.

[LoudnessFz]

Ermmm... Ur sprocket to start up wif perhaps? I dnt noe if we cn meddle wif the original gears inside? So u see, I noe nuts! Lol... Still am learnin bro...

 

 

 

Hahaha... Yeah true. No gd for ur bike too since it has much lower boiling point than our EO. And then once reached its limit, it will turn to a black gooey susbstance, whch I believe u all shld noe wat will happen next lh. Heee.. Tis will also happen if u dnt regularly change ur EO and only top up ur EO wen the lvl get low. I saw tis wif my own eyes on someone's Hyundai Verna; down and stripped apart engine block and the mech havin a hard time scrubbin the stucked black stuff frm the block's wall...

 

alamak bro..kete kan tu?4 stroke 2 stroke kan lain..somemore car engine oil only lube piston crankshaft without the transmission..2 stroke bike lube crankshaft only..i dont think EO will get sticky and gooey that fast right?paling2 pon bawak jauh2 sampai melaka teros kering..hahaha

[LoudnessFz]

Can anyone tell me why rxz block have noise?

Moto shop i buy the bike say they have overhaul the bike.

Thank you..i'm a P plate..dunno much about bike.

 

yeah like bro syam said what kinda noise?normally..its hard to find an rxz without noise unless its from the hands of an uncle..even first hand rxz after sometime will make noise also..haha

[syamitomo]

alamak bro..kete kan tu?4 stroke 2 stroke kan lain..somemore car engine oil only lube piston crankshaft without the transmission..2 stroke bike lube crankshaft only..i dont think EO will get sticky and gooey that fast right?paling2 pon bawak jauh2 sampai melaka teros kering..hahaha

 

Eh? Ya hor... Sori my mistakes, I guess I got carried away wif cars. Lol! Paiseh2. But yeah, just take it a sharing experience lh aite? Esp for those wif 4strokes vehicle. Tats y frm the day I passed my 2B license up till now, RXZ is still my choice!

 

(OIT! Jgn lh sebut pasal kisah dulu tu, malu lah aku. Ni gara2 EO Petronas tipis tu lh! XP)

[syamitomo]

Guys will there be any meet up soon? like Kopi session

Wanting to meet more riders and friends. Kinda isolated from social world always sch and work.

 

If god permits bro, we'll organise a meetup one fine day.

[velocity325]

Ermmm... Ur sprocket to start up wif perhaps? I dnt noe if we cn meddle wif the original gears inside? So u see, I noe nuts! Lol... Still am learnin bro...

 

wooohaaa..sprocket is a tricky one..i think i can count my rear but not front..hahas, gear to adjust gear ratio? i don't think so yea..gotta change to racing gear box..high revv to generate more power at low gear with low ratio..stock gearbox confirm low reevv low power high gear ratio that why slow pickup at low revv..

 

If god permits bro, we'll organise a meetup one fine day.

 

bro, if can weekend or saturday, i'll be loved man!!

[Azry88]

My rxz usually wont start on my first kick start, it needs like around 5 times then it starts. Anybody noe whwat cause this problem? Is it that i need to service my carb? If it is, wheres the best place n how much?

[Azry88]

How much should i sell for my rxz coe mid 2013? Is 1k reasonable?

[velocity325]

nahhh..it depends on how you kick, IMO..you've gotta be on your bike on your feet not mainstand, best is side stand up, kill switch if there is, make sure in run position, fuel petc@Ck if have switch it to on/reserve depending on fuel remaining, face your front wheel straight aligned with bike, both hands on grip, don't ever turn throttle while kick starting[like those ah beng and pehhhhh all the way](unless really bo bian, then open throttle a little to let fuel into carb), choke if didn't run bike for days or weeks, make sure no one put banana in your exhaust, then finally with your right hand or right leg toes, flip the kick stater outwards, with your right feet not hands, on the grip part, puch it down slightly until you can feel compression, then let it out a little and give it a firm kick, a hard one perhaps, don't worry, kick starter won't spoil because engine runs harder and faster than it..FYI, my bike even never start for 3 days, 1 kick also can start and it's a FE plate..engine cover and kick starter might not be stock but definitely not those new ones..:)don't service carb..after 6/12 months of riding, do a top service..there's one at unique at kaki bukit, 140$SGD if i'm not wrong that includes "polish" piston block service carb all these..it's a value package!

[velocity325]

Thank you bro..so what is the best solution?

Should i change the piston or what?

 

nono! don't do that, you didnt seize..pardon me, ignore my previous post..suddenly remember a lot of possibilities..cold start, worn out engine bearings, or maybe cheap cheap things like piston ring..because if can start engine can move, can say no need to change piston..your sound is like a magnet attracting another magnet just that it's louder? if yes, just make sure the sound disappear in around a minute or less cause if it's longer means after expanding, still lose..higher chance of seizure..or those pehh pehh sound, previous owner tamper or remove silencer..i got so scared of the sound that i didn't dare to take off and even if i did, i can't take off properly due to the stress..or maybe haven run in properly yet..some people choose to replace piston but don't know bore piston or block..i think block so they no need to run in..after top overhaul, engine is new..just that outlook is old..with those cable like fried noodles..correct me if i'm wrong..

 

How much should i sell for my rxz coe mid 2013? Is 1k reasonable?

 

what is the condition? when was it last overhaul? whats the edition? maybe plate front alphabets helps..stock parts?

[Hans21]

Bros, i wanna ask where to get original front fork? And whats the damage? My fork got eeeeeek sound when i test it.. Thanks in advance

 

 

Sent from my iPhone using Tapatalk

[Hans21]

Or issit i just change spring n oil seal? How to test if the fork got slight misalignment?

 

 

Sent from my iPhone using Tapatalk

[Azry88]

thank you velocity325. ur explaination really in detail. aniway about my rxz, its FF plate 1987 registered COE till Feb2013. overhaul top block last year. using Y3 block piston 0.75 condition still good. is 1k reasonable?

[velocity325]

Or issit i just change spring n oil seal? How to test if the fork got slight misalignment?

 

 

Sent from my iPhone using Tapatalk

 

wahahaha, did you drop your bike? or got self skid ..fork re-alignment, i know of a shop, 80$..the time i see change seal, not that cheap ehs..aiya..rxz items stock parts cheap cheap, no worries, visit a shop.. or wait for the pros' to reply..

[Problematic]

thank you velocity325. ur explaination really in detail. aniway about my rxz, its FF plate 1987 registered COE till Feb2013. overhaul top block last year. using Y3 block piston 0.75 condition still good. is 1k reasonable?

 

wah 1k only eh? shld have bought from you lah if all ori..mine FF plate COE till March2013 bought it at shop kena 1.5k this yr Feb..local parts somemore..nw still learning..newbie kena carrot big time =(

[syamitomo]

Bros, i wanna ask where to get original front fork? And whats the damage? My fork got eeeeeek sound when i test it.. Thanks in advance

 

 

Sent from my iPhone using Tapatalk

 

Or issit i just change spring n oil seal? How to test if the fork got slight misalignment?

 

 

Sent from my iPhone using Tapatalk

 

U can alwys get new original fork at Auto Machinery along Rowell Rd. Do take note tat ori fork, they dnt come in one set; it comes in piece by piece and u somehw gotta fix it or someone to fix it for u and hv it setup for ur riding preference and style. Unless it's OEM like KYB(I noe ori is also KYB brand bt me talkin abt those wif diff color legs), tat u cn get in one big box set. Lol! If nt, u cn alwys hunt for a pair at scrapyards ard the island for used ones!

 

Abt the sound ur hearing, I dnt noe y ur fork is making sound like tat? U sure its not coming frm ur brake caliper or hub bearings or loose cone bearings or anythn yg sewaktunye? Just askin only. Watever it is, mayb u ought to service ur fork kot? Mayb start by peeling off ur dust seal, chck if got sand or anythn inside then lube it wif gd quality grease. Replace the dust seal if ur seal looks haggard and is cracking up($13 for one pair?). Btw if oil is leakin, then its definitely ur oil seal. If got no leak, then dnt bother. or mayb ur fork is bottoming out? Mayb top up abit wif ur preference fork oil? Best if u pour out the old fork oil and refill wif new ones. I dnt noe if changin to a new spring will help u much. Coz its a preset spring, no such thng as upgrading to harder springs or softer ones. All u cn adjust is of the fork oil; the amount and vicosity of the oil.

 

I dnt really understand wat u mean by misalignment bt I'm guessig u wanna noe if ur fork got bent or if ur fork is fixed one slightly higher/lower than the other. For the first one, I do tis by taking the forks out frm the bike, lie it down on the floor, and while squatting on top of the fork leg, make sure it dsnt move even an inch, turning the tube(the chrome tube) wif sumthn at the top of the tube as a guide. Tis will tell u iif ur tube is strght as an arrow anot. U shld b abke to see it if u keep on turnin and some part of the tube will come close to ur makeshift guide and some part will be away frm it. Its norm if it runs abit, mayb due to the force of braking or frquent goin up the curb? Bt if it rabak, mayb u ought to hv it pressed. Anyway, if nt, since its out of the bike alrdy, may I suggest u svc it as wat I mentioned above one time shot. As for alingment while it is still on the bike, take out ur frnt wheel. Then use the frnt wheel shaft and shove it thru the fork leg. If its align correctly, the shaft shld go thru both legs smoothly. If nt, mayb u nd to adjust the height of one of the fork? Mayb wif the help of a ruler as a guide? I hope tis helps...

[Schecter]

hey bros,

 

where can i get original domino fast trottle? and how much?

[Schecter]

hey bros,

 

where can i get original domino fast trottle? and how much?

[DiNo4264]

Bros.. Where can i get stainless steel spokes for my 18 inch rims?

[akuskywalker]

hey bros,

 

where can i get original domino fast trottle? and how much?

 

ah boi have i think. sell around 140(more or less)

[akuskywalker]

i wanna ask if we change to tyre(sotong) kene caught by tp kene saman/points? just curious

[Hans21]

Bro syamitomo, your effort n time spent to explain in detail is much appreciated.. I will do as told ..

 

 

Sent from my iPhone using Tapatalk

[velocity325]

i wanna ask if we change to tyre(sotong) kene caught by tp kene saman/points? just curious

 

nahh..at most insurance don't cover you when you kana [TOUCHWOOD] serious skid or accident [TOUCHWOOD] cause under insurance law if you find there's one stating about modifications..

[velocity325]

one thing bad about rxz is the parts don't come complete..fuel tank don't come with pet cock, new hose, new fuel gauge, new lock..only one thing that comes complete..the exhaust..

[Hans21]

But bro, one thing is with skill and will. Our 'Z' can smoke all 2b n 2a bikes.. And that for less than 13k.. *cough rs cough*

 

 

Sent from my iPhone using Tapatalk