[Group] YAMAHA RXZ

[ucie]

hello anyone care to answer my question???

[velocity325]

hello anyone care to answer my question???

 

i had one modified silencer like that..i was too scared that time as i was new to bike..so when i went to a shop to replace new stock silencer, i forget to take back my old silencer..conclusion, can..that time my that old silencer sounded like those rd on the road..or rather like motogp..sharp and buffered..the silencer was just like a straight stick, not like the stock one..got a bump..

[nasir350z]

hi peoples.

Edited January 31, 2012 by nasir350z

[nasir350z]

hello everyone. who got spare standard carb to let go ? looking for one.

 

untuk race ke pe?ahahs

[ucie]

i want to make standard rd 350 lemang sound u know..not the internal buzzing type..hehe..

[velocity325]

i want to make standard rd 350 lemang sound u know..not the internal buzzing type..hehe..

 

YYAAAA..the image i remembered clearly, was just the whole silencer straight..when my stock came, it was with a bump one..the sound isn't irritating..just very loud and empty..so roughly if u see a silencer, all the way straight..you can try..

[LoudnessFz]

i want to make standard rd 350 lemang sound u know..not the internal buzzing type..hehe..

 

der..kau gi la kedai motor tanye dorg bleh buat ke tak..haha...nak buat betul2 sama tu susah sikit uh...assuming kau pon tgh pakai lemang..the difference is that perot dlm rxz dgn rd350 mesti ada lain tak byk pon sikit...datu rd350 piston nye size(bore x stroke) pon mesti lain...ni yg determine how the sound turns out.

 

kalau nak depend on silencer je,tu kau boleh try2 sendiri..belik silencer..pastu drill lah lobang pelan2..start sikit dulu baru byk sampai ko dpt sound die..

 

like how a standard pipe cannot make an internal bee sound without modifying it?ah mcm gitu lah..

[fahmihayden]

Tzm carb same with rxz? Mikuni or kehin i forgot

 

mikuni. i'm looking for one asap though.

[fahmihayden]

untuk race ke pe?ahahs

 

hahaha. tkder la. nak kasi standard balik.

[ucie]

der..kau gi la kedai motor tanye dorg bleh buat ke tak..haha...nak buat betul2 sama tu susah sikit uh...assuming kau pon tgh pakai lemang..the difference is that perot dlm rxz dgn rd350 mesti ada lain tak byk pon sikit...datu rd350 piston nye size(bore x stroke) pon mesti lain...ni yg determine how the sound turns out.

 

kalau nak depend on silencer je,tu kau boleh try2 sendiri..belik silencer..pastu drill lah lobang pelan2..start sikit dulu baru byk sampai ko dpt sound die..

 

like how a standard pipe cannot make an internal bee sound without modifying it?ah mcm gitu lah..

 

 

hahhaha..aku tahu..ehh bro main Z balik uh..

[LoudnessFz]

hahhaha..aku tahu..ehh bro main Z balik uh..

 

main tu main jgk..tapi 125z..buat pakai utk keje..haha

 

sorry bro bkn nk ckp ape uh..im moving to class 2 now..pelan2 nga kompol duit...looking2 for Yamaha brand also..rxz aku da 3 kali main..tiba masanya utk upgrade..heheh

[Geekster1403]

anyone can recommend me good tyre for rxz? i like to play corner but i not sure which to change to.

[CHINCHAO]

anyone can recommend me good tyre for rxz? i like to play corner but i not sure which to change to.

 

dunlop T901A (:

[CHINCHAO]

hi bros amcm semue? ada baik kah? khekeke. anyways, which gantung is shiok; super 4 showa OR KYB OR Makida?

[Geekster1403]

dunlop T901A (:

 

is it slippery? cause i want something with grip if road is wet. hehe

[LoudnessFz]

anyone can recommend me good tyre for rxz? i like to play corner but i not sure which to change to.

 

so far i know battlax BT39 uh,michelin pilot sporty also can..but it wears out faster and doesnt have an even tyre wear..

 

dunlop T901A (:

 

fuah tayar apa tu?nvr heard before..new eh?

[CHINCHAO]

Ouh, I dnt hv spare handlebar. Sori. Bt wat u cn do is to do wat I did, get urslf a primer/anti corrosion aerosol paint spray and coat ur handlebar aft sanding it dwn agn. I finished mine off wif another coat of "Chrome" spray. No rust since then! U wan I cn help u, no prob. Just get the brg2 ready je.

 

O.o can i know where u buy the primer/anti corrosion aerosol paint spray and also the chrome spray than maybe we can 'project' my handlebar tgt?

[CHINCHAO]

so far i know battlax BT39 uh,michelin pilot sporty also can..but it wears out faster and doesnt have an even tyre wear..

 

 

 

fuah tayar apa tu?nvr heard before..new eh?

 

can say new uh dunlop jgk. its TT901A ke T901A ey? lupe uh. hahaha. but its the newer version of TT900. heard from friend that use the TT901A saying the grip is better when cornering(:

[Geekster1403]

can say new uh dunlop jgk. its TT901A ke T901A ey? lupe uh. hahaha. but its the newer version of TT900. heard from friend that use the TT901A saying the grip is better when cornering(:

 

i actually plan to change rim + tyre together. i finding rb 8 legged rims. 17'' i think? heard 17'' is better for corner. is it true?

[Problematic]

sorry to interrupt, anyone know where can I do up my mainstand bracket? because I do not have a bracket for it..and roughly how much..tried some shops in mlysia but they say that the bracket comes along with the body frame and its hard to get...

Advise me please..thanks in advance..

[Geekster1403]

sorry to interrupt, anyone know where can I do up my mainstand bracket? because I do not have a bracket for it..and roughly how much..tried some shops in mlysia but they say that the bracket comes along with the body frame and its hard to get...

Advise me please..thanks in advance..

 

i have the same problem bro. asked around and they say must go for welding. heard at amk or sumth. just sharing what i know tho.

[CHINCHAO]

i actually plan to change rim + tyre together. i finding rb 8 legged rims. 17'' i think? heard 17'' is better for corner. is it true?

 

ive tried 17" and 18" and there's a lot of different in the height. to me lah, i prefer 17". last time i use front(90/80) and back(80/90) and it feels good the height to the road is just nice(almost scrap footrest a few times but i don't dare haahha) now im using 70/90 front and back. the feeling more shiok more closer to road and ur bike feels like piyo-piyo. haha. 18" is just to high for me lah. diff people diff views(:

[Geekster1403]

ive tried 17" and 18" and there's a lot of different in the height. to me lah, i prefer 17". last time i use front(90/80) and back(80/90) and it feels good the height to the road is just nice(almost scrap footrest a few times but i don't dare haahha) now im using 70/90 front and back. the feeling more shiok more closer to road and ur bike feels like piyo-piyo. haha. 18" is just to high for me lah. diff people diff views(:

 

want to change to 17'' already. but size of tyre and which brand still confuse me. what brand u try/recommend? hehe

[CHINCHAO]

want to change to 17'' already. but size of tyre and which brand still confuse me. what brand u try/recommend? hehe

 

dunlop TT900 is enuf. 70/90 is low for 17" in which im using or u can try 90/80 front and 80/90 back. either 1 also shiok. if u got $$ any willing to spent more, dunlop TT901A or Battlax. im using DURO 70/90(:

[akuskywalker]

hi bros amcm semue? ada baik kah? khekeke. anyways, which gantung is shiok; super 4 showa OR KYB OR Makida?

 

oh course showa la bro. kyb original with canister almost have the same standard as showa. makida is good, for cheaper alternative compared to the ones with canister. kyb batik is the more common one that is quite good too.