[Group] YAMAHA RXZ

[A-AN 07]

Morning bro! Looks like the plan is not heavily supported. We'll go wif ur 17th plan then...

Ok bro, noted. Maybe you want to edit your attendance list in RXZ clanz outing thread?? Let's plan for Sahur instead of breakfast, what do you think?? Beep me to plan further..

[estadio21]

hhmmm...ive got sum probs wit my zeck, hope some of u guys can help...

 

I recently ported my block n my carb size is 30...the thing is i realise i can rev up to max 7rpm...afta dat the bike feels vey heavy, i also tried opening the throttle more...i also tried dragging abit b4 changing gears...bt still wont work...could it be the jetting? im using 16-38 sprockets n im on 17" rims

[PHILIP79]

Will overhaul the engine with japanese parts cause more fuel comsumption?

[A-AN 07]

Will overhaul the engine with japanese parts cause more fuel comsumption?

Don't think so bro, unless you rebore your block, mod your pipe etc.. for speed performance then it will effect your fuel consumption. Japan original parts will be the best compared Malaysia or Thailand parts.

[blurchaoz]

my makida bronze starts to leak. is there anyway to get it done up?? if yes can anyone enlighten me which shop to go to??

 

the other thing is that my tyres tt900 which i had used for 4 months starts to bulge out a little bit near the lines.... . would like to know whats the cause of it.. is it manufacturer defect?? wear and tear due to the hot and cold weather ...? i remember in bbdc they told me the reason why the tyre bulge out but forgotten what was the answer to it.

[Izammo]

the other thing is that my tyres tt900 which i had used for 4 months starts to bulge out a little bit near the lines.... . would like to know whats the cause of it.. is it manufacturer defect?? wear and tear due to the hot and cold weather ...? i remember in bbdc they told me the reason why the tyre bulge out but forgotten what was the answer to it.

 

same with me. but mine is duro. its like 'benjol'. wonder why.

[hotbladerz]

my makida bronze starts to leak. is there anyway to get it done up?? if yes can anyone enlighten me which shop to go to??

 

the other thing is that my tyres tt900 which i had used for 4 months starts to bulge out a little bit near the lines.... . would like to know whats the cause of it.. is it manufacturer defect?? wear and tear due to the hot and cold weather ...? i remember in bbdc they told me the reason why the tyre bulge out but forgotten what was the answer to it.

 

same with me. but mine is duro. its like 'benjol'. wonder why.

 

About the tires 'benjol' or bulge out, could be problem comes from the inner side of the tire.

Due to tyres damage becoz of uneven surface of road. Maybe holes or some kind of hard humps on the road.. just my 2cents worth..

[syamitomo]

my makida bronze starts to leak. is there anyway to get it done up?? if yes can anyone enlighten me which shop to go to??

 

the other thing is that my tyres tt900 which i had used for 4 months starts to bulge out a little bit near the lines.... . would like to know whats the cause of it.. is it manufacturer defect?? wear and tear due to the hot and cold weather ...? i remember in bbdc they told me the reason why the tyre bulge out but forgotten what was the answer to it.

 

same with me. but mine is duro. its like 'benjol'. wonder why.

 

How much air did u guys pump in(PSI)? Just to let u guys know, when u guys are on the move, the tyre will tend to heat up. So the heat will further expand ur tube inside or hot air will developed inside those tubeless type of tyres, therefore increasing the pressure of ur tyre. So those slick tyres, which has a much thinner wall than all-weather tyre, might go bulging in every nooks and cranny of the already thinnin tyre. Well, just my 4cent, after 5% discount, worth of thoughts...

 

I too hav the same prob. All I did is to lower down the tyre pressure just a lil bit to extend the usage of the tyre. But now change already lah. U don't wan it to suddenly go *BOOM* on the road rite?

[SparkerS1]

when u guys are on the move, the tyre will tend to heat up. So the heat will further expand ur tube inside or hot air will developed inside those tubeless type of tyres, therefore increasing the pressure of ur tyre.:

 

yeap, yeap, dun pump too much, cos will compromise safety as well

[hotbladerz]

How much air did u guys pump in(PSI)? Just to let u guys know, when u guys are on the move, the tyre will tend to heat up. So the heat will further expand ur tube inside or hot air will developed inside those tubeless type of tyres, therefore increasing the pressure of ur tyre. So those slick tyres, which has a much thinner wall than all-weather tyre, might go bulging in every nooks and cranny of the already thinnin tyre. Well, just my 4cent, after 5% discount, worth of thoughts...

 

I too hav the same prob. All I did is to lower down the tyre pressure just a lil bit to extend the usage of the tyre. But now change already lah. U don't wan it to suddenly go *BOOM* on the road rite?

 

yeap, yeap, dun pump too much, cos will compromise safety as well

 

So, what are the normal PSI for our tyres?

Or is it PSI must follow strictly with our tyre sizes?

[PHILIP79]

my makida bronze starts to leak. is there anyway to get it done up?? if yes can anyone enlighten me which shop to go to??

 

the other thing is that my tyres tt900 which i had used for 4 months starts to bulge out a little bit near the lines.... . would like to know whats the cause of it.. is it manufacturer defect?? wear and tear due to the hot and cold weather ...? i remember in bbdc they told me the reason why the tyre bulge out but forgotten what was the answer to it.

 

Time to get a new suspensions man...

[PHILIP79]

my makida bronze starts to leak. is there anyway to get it done up?? if yes can anyone enlighten me which shop to go to??

 

the other thing is that my tyres tt900 which i had used for 4 months starts to bulge out a little bit near the lines.... . would like to know whats the cause of it.. is it manufacturer defect?? wear and tear due to the hot and cold weather ...? i remember in bbdc they told me the reason why the tyre bulge out but forgotten what was the answer to it.

 

How much ur TT900 tyre cost???

[A-AN 07]

my makida bronze starts to leak. is there anyway to get it done up?? if yes can anyone enlighten me which shop to go to??

Go back to the shop that you purchased it. By right they have to either have it 1 to 1 exchage or do something about it. Got this experience before but my mech responsible enough to have it change 1 to 1 with the agent.

 

Time to get a new suspensions man...

Let him try my suggestion above, if it works he will safe money:)

[A-AN 07]

Hi guys, i'm inviting all of you here to attend this small meetup with my other thread friends for the event stated below. Please note that i'm posting it here is because this is NOT originated RXZ clan outing but all of you are still invited to attend it. Please liase direct with me via the contact no stated below. Your present will be much appreciated.

 

SengKang Ryderz Meetup: Ramadan break fast / Dinner for muslim & non muslim.

 

Location: Adam Restaurant a.k.a Adam Corner (kopitiam near to Boon Keng MRT before AS Phoon Bendemeer)

Date: Thursday, 18 September 2008

 

Meet there at 06:30pm sharp. After breakfast, we will plan for riding & maybe find a good place to chill for the night.

 

Please note that food is slightly pricey. A dish of proper meal costs from $5 onwards, even up to $10 if u order western. Drinks range from $1.50 onwards.

Prolly need to spend abt $10 per pax for a decent meal, drinks & mayb some snacks.

 

Parking is available also. Although no proper parking lot, u can juz park ur bike beside the kopitiam or at the pavement.

basically u can view your bike from where you sit, so no worries.

 

 

 

 

Interested Personnel Pls submit your names & handphone no below.

 

1. Zamani / 96926967

2. A-AN 07 / 81614514

3. AhGui / 96222701

4.

5.

6.

[uma-man]

hhmmm...ive got sum probs wit my zeck, hope some of u guys can help...

 

I recently ported my block n my carb size is 30...the thing is i realise i can rev up to max 7rpm...afta dat the bike feels vey heavy, i also tried opening the throttle more...i also tried dragging abit b4 changing gears...bt still wont work...could it be the jetting? im using 16-38 sprockets n im on 17" rims

 

bro..u try down ur sprockets to 15-37..last tym i used to have this prob when using 17"..but when i down to 15-37 ok alr..btw..pickup abit slow lah..but hujung ada..or maybe setting of the air is too much bigger than the oil..

[chin_0078]

hi guys. i am interested for the break fast meet up on thu. but i cant confirm 100% attendance due to work. i will liase with yall again on the day itself. here's my contact number: 91871138

[Thanh-BKK]

Hi

 

Does anyone here have an RXZ workshop manual? I need one

 

Many thanks in advance.....

 

Thanh

[Izammo]

How much air did u guys pump in(PSI)? Just to let u guys know, when u guys are on the move, the tyre will tend to heat up. So the heat will further expand ur tube inside or hot air will developed inside those tubeless type of tyres, therefore increasing the pressure of ur tyre. So those slick tyres, which has a much thinner wall than all-weather tyre, might go bulging in every nooks and cranny of the already thinnin tyre. Well, just my 4cent, after 5% discount, worth of thoughts...

 

I too hav the same prob. All I did is to lower down the tyre pressure just a lil bit to extend the usage of the tyre. But now change already lah. U don't wan it to suddenly go *BOOM* on the road rite?

 

yeap, yeap, dun pump too much, cos will compromise safety as well

 

i pump 210 front 220 back. max 230 for back stated on tyre. i think thats the fig if i still rem. so long nvr pump already. hehe.

 

anyway can we down suspension? cos i tried my fren rxz, his seat is slightly lower than mine, or is it my suspension is the long type? got such thing?

[syamitomo]

i pump 210 front 220 back. max 230 for back stated on tyre. i think thats the fig if i still rem. so long nvr pump already. hehe.

 

anyway can we down suspension? cos i tried my fren rxz, his seat is slightly lower than mine, or is it my suspension is the long type? got such thing?

 

Wat sush u using? Is it the same as ur fren's one? Cause I know diff sush comes wif diff travel/height... Now how do u explain tis - me and my wife bike is using Makida bronze, my bike using the 22~300kg one, my wife's 22~240kg one. But there's a wayyyyyyyyyyy diff in height! My wife bike is so jet up while mine is lower to the ground... We compare both sush's height physically, both stands the same height. So i bet it might be the Z's frame OR swingarm... Go figure......

[syamitomo]

Hi guys, i'm inviting all of you here to attend this small meetup with my other thread friends for the event stated below. Please note that i'm posting it here is because this is NOT originated RXZ clan outing but all of you are still invited to attend it. Please liase direct with me via the contact no stated below. Your present will be much appreciated.

 

SengKang Ryderz Meetup: Ramadan break fast / Dinner for muslim & non muslim.

 

Location: Adam Restaurant a.k.a Adam Corner (kopitiam near to Boon Keng MRT before AS Phoon Bendemeer)

Date: Thursday, 18 September 2008

 

Meet there at 06:30pm sharp. After breakfast, we will plan for riding & maybe find a good place to chill for the night.

 

Please note that food is slightly pricey. A dish of proper meal costs from $5 onwards, even up to $10 if u order western. Drinks range from $1.50 onwards.

Prolly need to spend abt $10 per pax for a decent meal, drinks & mayb some snacks.

 

Parking is available also. Although no proper parking lot, u can juz park ur bike beside the kopitiam or at the pavement.

basically u can view your bike from where you sit, so no worries.

 

 

 

 

Interested Personnel Pls submit your names & handphone no below.

 

1. Zamani / 96926967

2. A-AN 07 / 81614514

3. AhGui / 96222701

4.

5.

6.

 

UPZZZ for Sengkang Riderz!!!!

[A-AN 07]

Good morning everyone, have a nice day ahead....

[zamani]

Good morning RXZ riders. Coordially invite u guys for break fast / dinner session this coming Thursday. Hope to see u guys. Thanx.

 

[Izammo]

Wat sush u using? Is it the same as ur fren's one? Cause I know diff sush comes wif diff travel/height... Now how do u explain tis - me and my wife bike is using Makida bronze, my bike using the 22~300kg one, my wife's 22~240kg one. But there's a wayyyyyyyyyyy diff in height! My wife bike is so jet up while mine is lower to the ground... We compare both sush's height physically, both stands the same height. So i bet it might be the Z's frame OR swingarm... Go figure......

im figuring and not too sure also. haha. anyway good noon fellas.

[SparkerS1]

So, what are the normal PSI for our tyres?

Or is it PSI must follow strictly with our tyre sizes?

 

pls refer to my signature, thanks

[skirtchaser]

UPZZZ for Sengkang Riderz!!!!

 

bro i notice ur bike plate is "fe" same like one my fren GAVE to me recently...nw the bike at workshop n waitin for me to go lta transfer bike ownership...neway the only thing tat irks me is the ugly side signal infront so big n it looks so out of place...is it possible to replace it like the new models where the signal is embedded by the side of the head?? wat stuff u recommend to do on the bike?? if im nt wrong its in totally stock condition...wat tyres gd for tis bike?? hehe sori new to tis bike so get ready for lots n lots of stupid questions!!!!