[Group] YAMAHA RXZ

[rowley]

Originally posted by bloodybaguz@Jan 30 2006, 10:01 PM

so far my mileage 230 to 240km frm home to wrk

at least 4 or 5 days den need to top up.

ya need to do jetting n fine tuning.

it cost me 150sgd 2nd hand.for new carb

i 4got to ask.

okay lah tu mileage kau...kau lagi pun pakai tank cap tzm kan so minyak le isi lagi skit kan...powerful tak tu carb?heh heh

[bloodybaguz]

Originally posted by rowley@Jan 30 2006, 11:52 PM

okay lah tu mileage kau...kau lagi pun pakai tank cap tzm kan so minyak le isi lagi skit kan...powerful tak tu carb?heh heh

bukan tzm it tzr. minyak full tank 15 ketol

around 9 lite.

e carb ever top speed 160/170km/h.

[mudmat]

Originally posted by bloodybaguz@Jan 30 2006, 11:09 PM

bukan tzm it tzr. minyak full tank 15 ketol

around 9 lite.

e carb ever top speed 160/170km/h.

Wah! Power tu... Just by changing carb, jetting and tuning? pakai pipe ape?

[mudmat]

Rxz tank capacity brape ah? 13litres is it?

 

My bike clock about 320km and still got about 4 litres of petrol in the tank...

Rxz can really clock gitu banyak ke?

 

[WingZer0]

Originally posted by adyra@Jan 30 2006, 05:28 AM

tats y i nvr go there already go to other shop jb, spending a bit more by rm$1-$5 bettter wif goood workmanship.

any shops to recommend bro???

[Ajimey]

Originally posted by mudmat@Jan 31 2006, 02:34 AM

Rxz tank capacity brape ah? 13litres is it?

 

My bike clock about 320km and still got about 4 litres of petrol in the tank...

Rxz can really clock gitu banyak ke?

 

Wah... Ur FC so good???

[adyra]

Originally posted by bloodybaguz@Jan 30 2006, 11:09 PM

bukan tzm it tzr. minyak full tank 15 ketol

around 9 lite.

e carb ever top speed 160/170km/h.

??? I tot even rxz carb can top 160? changing to kr carb oso need to rejet. the fuel consumption is oso high i heard unless u do a lean jetting wic is not good. the kr carb is from old malaysia kr right?

[mudmat]

Originally posted by Ajimey@Jan 31 2006, 08:33 AM

Wah... Ur FC so good???

Maybe becos i never whack ah.. The most aku pegi pun 120km/h...

 

The bike is also stock condition ah..

 

[Ajimey]

Originally posted by mudmat@Jan 31 2006, 11:34 AM

Maybe becos i never whack ah.. The most aku pegi pun 120km/h...

 

The bike is also stock condition ah..

 

120km/h pon whack jugak! Tapi tak slalu kan? Aku nye FC bout 25-27km/l... Dat time runnin in 30km/l...

[adyra]

Originally posted by mudmat@Jan 31 2006, 11:34 AM

Maybe becos i never whack ah.. The most aku pegi pun 120km/h...

 

The bike is also stock condition ah..

 

bro since ur bike is stock, wats the stock sprocket size? issit 16/46 or 16/47? i forget. wah bro, ur bike stock? never change anything? rim oso nvr change? if i were u, i keep it stock only change jetting.

[bloodybaguz]

Originally posted by adyra@Jan 31 2006, 11:07 AM

??? I tot even rxz carb can top 160? changing to kr carb oso need to rejet. the fuel consumption is oso high i heard unless u do a lean jetting wic is not good. the kr carb is from old malaysia kr right?

it came frm scrape kr in spore dat wat my mechanic told me

how come lean jetting is not good

pls explain?

[bloodybaguz]

Originally posted by mudmat@Jan 31 2006, 03:31 AM

Wah! Power tu... Just by changing carb, jetting and tuning? pakai pipe ape?

pipe pakai 3bs operated.

[adyra]

air fuel ratio

lean jetting = more air less gas.

rich jetting = less air more gas.

normally slight lean is ok. too lean = piston seizure, piston ring worn out faster wic makes ur block noisy. Have u ever experience changing new piston n piston ring? the sound virgin right can hardly hear any noise. but after sometime, the sound came back. then either ur jetting or setting is not right. Im still trying n studying the rxz jetting with rxz carbs, trial n error. change back all stock n try jetting. if success, then mayb can try other carbs. if not, rxz carbs is good enough.

another tips i can share with, pilot or air jet lean when rpm hesitate to come down. turn ur airscrew to richer by 1/4 turn n test ride again. if problem still persist, change to next richer size.

[adyra]

yah scrape kr in singapore is the same as old kr in malaysian in singapore. not the victor kr. now seldom can see on the road. its a 150cc bike. keihin carb if im not wrong.

[bloodybaguz]

Originally posted by adyra@Jan 31 2006, 01:27 PM

air fuel ratio

lean jetting = more air less gas.

rich jetting = less air more gas.

normally slight lean is ok. too lean = piston seizure, piston ring worn out faster wic makes ur block noisy. Have u ever experience changing new piston n piston ring? the sound virgin right can hardly hear any noise. but after sometime, the sound came back. then either ur jetting or setting is not right. Im still trying n studying the rxz jetting with rxz carbs, trial n error. change back all stock n try jetting. if success, then mayb can try other carbs. if not, rxz carbs is good enough.

another tips i can share with, pilot or air jet lean when rpm hesitate to come down. turn ur airscrew to richer by 1/4 turn n test ride again. if problem still persist, change to next richer size.

thkz 4 e info. bro.

[bloodybaguz]

Originally posted by adyra@Jan 31 2006, 01:30 PM

yah scrape kr in singapore is the same as old kr in malaysian in singapore. not the victor kr. now seldom can see on the road. its a 150cc bike. keihin carb if im not wrong.

it not keihin, it mikuni 30mm.

[adyra]

Originally posted by bloodybaguz@Jan 31 2006, 12:34 PM

it not keihin, it mikuni 30mm.

hmmm i forget lar. last time my friend got ride the kr bike yr 1997.

[adyra]

anyone ever experience running the bike hot than usual but top end lost power? i mean top end a bit laggy.

[Ajimey]

Originally posted by mudmat@Jan 31 2006, 11:34 AM

Maybe becos i never whack ah.. The most aku pegi pun 120km/h...

 

The bike is also stock condition ah..

 

Eh Bro, got Ur Domino throttle not from e garage sales?

[bloodybaguz]

Originally posted by Ajimey@Jan 31 2006, 02:11 PM

Eh Bro, got Ur Domino throttle not from e garage sales?

gud bargain bro.

[mudmat]

Originally posted by Ajimey@Jan 31 2006, 11:59 AM

120km/h pon whack jugak! Tapi tak slalu kan? Aku nye FC bout 25-27km/l... Dat time runnin in 30km/l...

Tak selalu ah.. usually i ride arnd 100km/h on expressway...

[mudmat]

Originally posted by adyra@Jan 31 2006, 12:02 PM

bro since ur bike is stock, wats the stock sprocket size? issit 16/46 or 16/47? i forget. wah bro, ur bike stock? never change anything? rim oso nvr change? if i were u, i keep it stock only change jetting.

I tink the sprocket got change before becos i buy 2nd hand ma..

 

Currently i the front is 16(i not sure), the rear is 40...

 

Rim got change but previous owner is the one who change..

 

i scared my bike jetting is lean ah, maybe tats why my FC is very low... How to check whether jetting is lean rich or just nice?

[mudmat]

Originally posted by Ajimey@Jan 31 2006, 01:11 PM

Eh Bro, got Ur Domino throttle not from e garage sales?

I not sure whether the Domino throttle can fit on Rxz.. so i ask the seller to check for me first ah..

 

Currently aku pakai Daytona but Daytona not good ah... Macam ade lagging ah throttle die...

 

if original rxz throttle and cable how much ah?

[Ajimey]

Originally posted by mudmat@Jan 31 2006, 02:17 PM

I not sure whether the Domino throttle can fit on Rxz.. so i ask the seller to check for me first ah..

 

Currently aku pakai Daytona but Daytona not good ah... Macam ade lagging ah throttle die...

 

if original rxz throttle and cable how much ah?

Can, sure can fix.... Im using Domino... But must know from RS 125 or 250 coz its different... Ur mech oso must noe how 2 fix la... Dun ask me which 1 Im using, I oso dunno...

Original RXZ punyer tak tau la brape...

[shahrul_rXz]

how can we knoe if our bike dah kena jetting ke blum???

by sound ke fuel comsumption???

tanxx