[Group] YAMAHA RXZ

[alep20]

i'm using 80/90 for front..for the rear, i forgot..

 

ur rear shd be 90/80

 

 

btw guys,im planning to use 3 stick 18inch rims..so what tyres are gud for cornering???

[syamitomo]

guys' date=' whats the correct size for rear/front tire ? i just changed my rear tire, and its 80/90, is that correct or it should be the front ?[/quote']

 

i'm using 80/90 for front..for the rear, i forgot..

 

ur rear shd be 90/80

 

 

btw guys,im planning to use 3 stick 18inch rims..so what tyres are gud for cornering???

 

Hmmm... 90/90 would be a best bet for the rear. Esp for cornering wif 18". 80/90 would be a bit too thin(minimal road contact) and too high for the rear. 90/80 would be perfect! But try finding tat size for our 18" in Spore. If u find one, be it cheap or expensive, beep me here...

[boi_s]

Hmmm... 90/90 would be a best bet for the rear. Esp for cornering wif 18". 80/90 would be a bit too thin(minimal road contact) and too high for the rear. 90/80 would be perfect! But try finding tat size for our 18" in Spore. If u find one, be it cheap or expensive, beep me here...

 

so kirekan da salah la nie my rear ? or still okay ?

[syamitomo]

so kirekan da salah la nie my rear ? or still okay ?

 

Nvr say it is wrong. I got a few of my frens using those sizes as well. Just a personal opinion I guess. As long as it is relatively new and tread to it, shld be fine...

[Barongan78]

wld like to ask , which 2t u guys use?

semi or fully cynthethic?

i noe d more expensive, d higher grade n so-called good but wats d diff?

[nosey]

i have a question..

use 2t pump better or premix better?

[wantongkol07]

ur rear shd be 90/80

 

 

btw guys,im planning to use 3 stick 18inch rims..so what tyres are gud for cornering???

 

to me battlax

 

barongan: i use semi now, but changing fully synthetic. hehe.

 

nosey: Up to u. different people have different perceptions.

some people say use premix better coz smoother, and u know that you have enough 2t to lubricate your piston. but leceh. need to measure peoperly, pump petrol must follow litre la ape la.

Some people say use pump better coz not leceh and all. but u never know when u riding, the pump is working or not.

hopes this helps. =)

 

im still a noob, dont flame me k? hehe:smile:

[alep20]

to me battlax

 

barongan: i use semi now, but changing fully synthetic. hehe.

 

nosey: Up to u. different people have different perceptions.

some people say use premix better coz smoother, and u know that you have enough 2t to lubricate your piston. but leceh. need to measure peoperly, pump petrol must follow litre la ape la.

Some people say use pump better coz not leceh and all. but u never know when u riding, the pump is working or not.

hopes this helps. =)

 

im still a noob, dont flame me k? hehe:smile:

 

 

18inch ade battlax ke??

 

 

i used to use the pump but it failed on me TWICE!!!!!!!!!!!n piston jam!!!!!!!!!!!!so now im using premix for fear of piston jam again..cos i dont trust pumps anymore:shades:

[nosey]

im still a noob, dont flame me k? hehe:smile:

 

thanks for the info..dont worry, i'm a noob too..haha..i wanna learn more about rxz..

 

btw, what do u guys do to your bike to increase pick up and speed?

[nosey]

i used to use the pump but it failed on me TWICE!!!!!!!!!!!n piston jam!!!!!!!!!!!!so now im using premix for fear of piston jam again..cos i dont trust pumps anymore:shades:

 

i'm planning to use premix all the way and remove my 2t pump since i'm not gonna use it anymore..after reading what u said about the pump failed u twice, now i'm abit phobia to use the pump..haha

[alep20]

btw, what do u guys do to your bike to increase pick up and speed?

 

try playing ard with sprockets 1st n use thin tyres,if not satisfied,do up ur pipe,if again not satisfied,port ur blk,not enuf speed??port ur carb or use uma or keihin carb,still not satisfied??use racing parts...do this at ur own risk =)

[nosey]

try playing ard with sprockets 1st n use thin tyres,if not satisfied,do up ur pipe,if again not satisfied,port ur blk,not enuf speed??port ur carb or use uma or keihin carb,still not satisfied??use racing parts...do this at ur own risk =)

 

hmm, how much do the mechanic charge if i ask them to port my block or carb??

[boi_s]

hi guys, if during raining, when i brake, if there's a screeching sound coming from the front brake, whats the cause ? disc brake ? caliper ? brake pad's still new. mech already position the caliper correctly

[engeto]

Good morning fellow RXZ riders and all the old timers.My first time posting in forum here but have been actively reading your discussions to increase my knowledge on this lovely bike.Got my license 5 months ago and does not hesitate to buy this bike,FH plate with blue catalyzer coverset.Hope to learn more new things from you guys here..

[izz]

wld like to ask , which 2t u guys use?

semi or fully cynthethic?

i noe d more expensive, d higher grade n so-called good but wats d diff?

 

rs putoline 959....14 buck...

ur piston will b clean...

any fully can lah alraedy 4 me

[izz]

18inch ade battlax ke??

 

 

i used to use the pump but it failed on me TWICE!!!!!!!!!!!n piston jam!!!!!!!!!!!!so now im using premix for fear of piston jam again..cos i dont trust pumps anymore:shades:

 

me too... premix the best

the worst piston sist onli nt jam.......hehe

[izz]

hmm, how much do the mechanic charge if i ask them to port my block or carb??

 

port block onli...carb n pipe no need..hehe

mod pipe spent how much onli? GIVE $$$ to king of the road is $700, nutin done to ur bike so tink twice.

wit $700 can down engine change gear ration n lot more...

wat type of portin u want? haha

[nosey]

port block onli...carb n pipe no need..hehe

mod pipe spent how much onli? GIVE $$$ to king of the road is $700, nutin done to ur bike so tink twice.

wit $700 can down engine change gear ration n lot more...

wat type of portin u want? haha

 

porting block also got type uh??haha..mind suggest me what type of porting is good??sorry for asking too many question..i'm a noob..haha

[Izammo]

for 2t i using $4 castrol one. i dont care much about it as long as it lubricates my piston. haha.

 

for tyres, i got a question. usually it shows 80/80, 90/90, numbers/numbers, but mine is 2.75 and 3.00. what is that? checked on the internet but cannot find to convert to numbers/numbers.

 

and what sprocket is good for fuel saving especially if i ride long distances everyday? changing sprocket soon, its alraedy 1 1/2 years old. haha.

[Thanh-BKK]

Hi.

 

I have those same tyre sizes, they are stock on Thai-made RXZ. I.e. 2.75-18 front, 3.00-18 rear. Next time will change my rear tyre to 3.25-18

 

Best regards.....

 

Thanh

[blurchaoz]

wld like to ask , which 2t u guys use?

semi or fully cynthethic?

i noe d more expensive, d higher grade n so-called good but wats d diff?

 

the difference between cheap 2t and ex 2t is the thickness of the 2t. usually if u see the motul packaging they will state for premix only. this is becos of the 2t thickness which is hard for the pump 2 push it up to the carb. so if ur using higher grade of 2t its best if u go premix.

 

i have a question..

use 2t pump better or premix better?

 

premix broo!!! haha... u will knoe that ur piston is always lube well...

 

 

im still a noob, dont flame me k? hehe:smile:

 

well we are here not to flame each other... some of us here wants to gif the best to our bike. some wants to cut cost and argue about it and etc

 

i used to use the pump but it failed on me TWICE!!!!!!!!!!!n piston jam!!!!!!!!!!!!so now im using premix for fear of piston jam again..cos i dont trust pumps anymore:shades:

 

i don trust pump as well.. piston seize once due to gasket wear and tear..

 

 

try playing ard with sprockets 1st n use thin tyres,if not satisfied,do up ur pipe,if again not satisfied,port ur blk,not enuf speed??port ur carb or use uma or keihin carb,still not satisfied??use racing parts...do this at ur own risk =)

 

don agree with:

1)thin tyres

2)port carb

3)uma carb and keihin carb

4) racing parts

 

best to play with standard mod stuff .

 

hi guys, if during raining, when i brake, if there's a screeching sound coming from the front brake, whats the cause ? disc brake ? caliper ? brake pad's still new. mech already position the caliper correctly

 

tried changing ur brake disc?? usually the screeching sound is normal during rainy time..

 

hmm, how much do the mechanic charge if i ask them to port my block or carb??

 

lorong bapok block porting can cost as much as 400RM. try not to port your carb.

 

porting block also got type uh??haha..mind suggest me what type of porting is good??sorry for asking too many question..i'm a noob..haha

 

its not about type bro... its actually about how far u want to play your bike 1kilo, 1.5kilo etc.... different mech got different porting skills...

[Usedbike]

guys planning to go scrapyard 1 of these days,mayb weekend...i got all the scrapyard address in singapore....hhahahah

any takers???go there look2 see2 or look2 buy2....

[frrankster_99]

guys planning to go scrapyard 1 of these days,mayb weekend...i got all the scrapyard address in singapore....hhahahah

any takers???go there look2 see2 or look2 buy2....

 

so anyone is up with u rite now?? ahahaaa...

its been awile since i chk this forum...

hellooO guys!

[blurchaoz]

frankster kape??? haha ... lama ilang kan diri??

[Izammo]

Hi.

 

I have those same tyre sizes, they are stock on Thai-made RXZ. I.e. 2.75-18 front, 3.00-18 rear. Next time will change my rear tyre to 3.25-18

 

Best regards.....

 

Thanh

3.25 would be very big i guess. 3 is already bulky to me. haha.

 

guys planning to go scrapyard 1 of these days,mayb weekend...i got all the scrapyard address in singapore....hhahahah

any takers???go there look2 see2 or look2 buy2....

 

set. how bout good friday?