[Discussion] Technical - D.I.Y On Your Super Four!

[Guest quizesilver]

to all who have been to the diy.

i am very sorry for me being late.

 

i dun feel well fever and who body ache...

winstonz hey sorry for taking out ur take for nothing... haha really blur.

 

hope u like ur header.

 

a few thing 1st time.

change brake pad

take out header

[Specs]

Originally posted by quizesilver@Nov 7 2005, 02:32 AM

to all who have been to the diy.

i am very sorry for me being late.

 

i dun feel well fever and who body ache...

winstonz hey sorry for taking out ur take for nothing... haha really blur.

 

hope u like ur header.

 

a few thing 1st time.

change brake pad

take out header

Haha nvm wat at least they got a customer service hotline to call..hehe

[whisperer]

wah lao eh.... tot not taking out headers??! alamak, den i shudn have gone to work man! advise on taking out headers? me doing my headers makeover next weekend leh

[Guest quizesilver]

Originally posted by whisperer@Nov 7 2005, 05:20 AM

wah lao eh.... tot not taking out headers??! alamak, den i shudn have gone to work man! advise on taking out headers? me doing my headers makeover next weekend leh

nothing special juz need two ppl would be easiler.

my that grey colour tool kit. to access the nut.

 

other then that ... haha chit chat lor...

 

btw can get for me one black high temp cos winstonz yester accidentantly used mine. charge to his acct.

[ralliart_ray]

yo bro, sorry that I had to leave early coz in the evening got things on... didnt help you clear the mess:sorry: take good care, man. hope to see u soon

[Guest quizesilver]

Originally posted by ralliart_ray@Nov 7 2005, 12:34 PM

yo bro, sorry that I had to leave early coz in the evening got things on... didnt help you clear the mess:sorry: take good care, man. hope to see u soon

hey no prob. extend the thanks to winstonz too cos he bring a big bag to collect all the waste...

u guys hor really generate alot of waste. for the environment

[Guest quizesilver]

7th DIY session coming up soon.

 

Date: TBA

Time: TBA

Venue:Blk 542 CCK North 5

Equipment: will provide oil filter opener, spark plug opener.

** take note as it is not at LAB, bring all those u need to change**

 

Equipment needed for header make over

===========================

For those who are interested to know what are the things you'll need, here it is:

 

-Sand paper-rating 300 and 120 (preferably cloth type as will come in touch with water. Cloth type will not tear)

-Water

-High temp Spray

-Newspaper (like posted, you'll need quite alot. For spraying purposes)

-trash bag (throw your rubbish)

-Mp3 player/board games/card games/radio etc for entertainment while waiting.

===========================

 

The below will be carried out. (diy area expanded)

1. EO change

2. Oil filter

3. Spark Plug

4. Clean air filter

5. Flush coolant

6. Header - make over

7. Change brake pad

 

Interested:

1.

2.

total: 00

 

Red Line Water Wetter Coolant - $20

1.

2.

total: 00

 

Red Line Engine Oil 10W40 - $22

Nobody want ah???

1.

2.

total: 00

 

Amsoil Engine Oil 10W40 - $18

New lobang for all

Nobody want ah???

1.

2.

total: 00

 

Fuch Silkolene pro4 15w50 @ $18 (left abt 20 bottles)

New lobang for all

Nobody want ah???

1.

2.

total: 00

[gene36]

Wanna add removal of headers for spraying to this coming 7th DIY session instead? cos i and whisperer will be doing it this coming sunday i think... then probably, those who wanna take out and respray headers can all do it together...

 

Things to bring for removal of headers:

 

Size 10 socket (for the 8 nuts on the headers)

Size 14 or 12 socket (was told 14 but when i tried mine was size 12 i think)

Flower Allen Key (Removal of end can nuts, some flower allen nuts, mine's normal nut)

 

Things needed to spray:

 

Sperex!!!

Newspaper

Rubberbands (please bring alot, just in case some never bring. Be considerate. hmmm.. then i shalln't bring... whahahha...jk)

 

Things needed for removing old paint:

 

Sandpaper. Cloth one prefferably.

Thinner!

Metal Brush.

 

Needed to kill our bored:

 

Some crazy sbf members who can talk c***/rubbish.

Music.

Mama-shop nearby

girls

giRLs

GIRLS....

 

Two things we would definately need if wanna remove headers and have a good job doing it:

 

Time and The SUN.

[Guest quizesilver]

gene

i can't go. had an oversea trip.

 

actually rubber band no need also can.

i did winstonz without it.

[ichiro_jeff]

=) so the 7th DIY is coMINg up soon?

can u guys leave ur contact here? so tt i know who to contact with.. thanks a lot.. i jus got my biKE not lONG ago.. so many many thinGs need to be doNE.. glad if u guys can help..

[whisperer]

Originally posted by quizesilver@Nov 7 2005, 01:27 PM

gene

i can't go. had an oversea trip.

 

actually rubber band no need also can.

i did winstonz without it.

cant go? hmm... anyway currently out of black spray, new stock shud be coming in dec. wads the rubber band for ah? den what size nut u all use to remove the headers? aiyah think i need to get my own personal toolkit liaoz. any suggestions on where to get a reasonable kit like urs? not too ex, no need too high end also. think i going down LAB to get the tire kit tom.

 

gene, so where we doing the spray this sunday?

 

xbox, when u free to help me with my puncture ah?

[Guest quizesilver]

mine i buy from the ah boy opps / behind the kopi shop.

cost abt 20

find it is good enuff for me.think next time must charge u all lei... cos some nut abit rounded lei. hehe

 

k when the stock come in let winstonz know.

i will then do my header...

 

ur tire can either u buy the kit liao then do urself else u spend abt $6 do ask shop patch else go bike shop to repair.

 

if u dun mind can get the non gas canister one cheaper.. but patch at petrol station lar... haha

 

as mention i will nt be free this weekend so... u all careful with the screw k?

take some wd40 also it may help. dun tighten too much on one nut. when both nut abt there then tighted tog with unbalance.

[whisperer]

Originally posted by quizesilver@Nov 7 2005, 04:58 PM

mine i buy from the ah boy opps / behind the kopi shop.

cost abt 20

find it is good enuff for me.think next time must charge u all lei... cos some nut abit rounded lei. hehe

 

k when the stock come in let winstonz know.

i will then do my header...

 

ur tire can either u buy the kit liao then do urself else u spend abt $6 do ask shop patch else go bike shop to repair.

 

if u dun mind can get the non gas canister one cheaper.. but patch at petrol station lar... haha

 

as mention i will nt be free this weekend so... u all careful with the screw k?

take some wd40 also it may help. dun tighten too much on one nut. when both nut abt there then tighted tog with unbalance.

wah... not me not me! i never use ur nut! me jus use the wrench remove the fuel tank nut nia! but if nut rounded, maybe means the nut abit lousy hor... so which shop u mean? LAB? aiyah, so many things to get, but resources running abit low. think mus lun till next pay check

[Guest XBOX80]

Originally posted by whisperer@Nov 7 2005, 03:41 PM

cant go? hmm... anyway currently out of black spray, new stock shud be coming in dec. wads the rubber band for ah? den what size nut u all use to remove the headers? aiyah think i need to get my own personal toolkit liaoz. any suggestions on where to get a reasonable kit like urs? not too ex, no need too high end also. think i going down LAB to get the tire kit tom.

 

gene, so where we doing the spray this sunday?

 

xbox, when u free to help me with my puncture ah?

but urs is 45 degrees angle go in leh dun know how to dig/enlarge the hole.....

[winstonz]

Originally posted by quizesilver@Nov 7 2005, 12:21 PM

nothing special juz need two ppl would be easiler.

my that grey colour tool kit. to access the nut.

 

other then that ... haha chit chat lor...

 

btw can get for me one black high temp cos winstonz yester accidentantly used mine. charge to his acct.

haha... sorry andrew, i 'robbed' ur spray. stocks come i deliver to u lah. see header til shiok, thinking of adding one more layer to it. or should i wait n see how long the paint will last on this layer...

if ya doing headers, take the chance to start bike with header on minus the end can... :lovestruck:

[ralliart_ray]

winstonz post pic leh... :lovestruck:

[Guest quizesilver]

Originally posted by winstonz@Nov 7 2005, 10:42 PM

haha... sorry andrew, i 'robbed' ur spray. stocks come i deliver to u lah. see header til shiok, thinking of adding one more layer to it. or should i wait n see how long the paint will last on this layer...

if ya doing headers, take the chance to start bike with header on minus the end can... :lovestruck:

yoz

u noe why i never start ur bike without the header??

i scare dust go in or wat... then i cant pay for ya over haul.

cheers

 

u see how long this layer last. u still got some with me.

[winstonz]

Originally posted by ralliart_ray@Nov 7 2005, 11:01 PM

winstonz post pic leh... :lovestruck:

i got problems with my hp 'talking' to my pc. will try to post asap

[gene36]

if that's the case... why not we wait for you... then we do together ? when will you be back quicksilver ?

[Guest quizesilver]

gene

wah lau...

pai sei lei.

 

will not be now. cos must also wait for my spray to be in. or else u all help chip in the balance then we do tog lor. hehe

[winstonz]

ok, here are the pics taken.

the headers which had been sprayed abit. before that, rusted parts are sandpapered leaving the headers silver in colour

[winstonz]

headers closer look

[winstonz]

another one

[winstonz]

[winstonz]

bike after stripping the headers