[Group] Sach Madass 125CC

[iamlefty]

DeAD sia this thread,btw i tried putting Voltage stabiliser,Broquet and soon my OORacing CDI from uk....otw soon....hehe.....cdi just install for future port polish+bore up...hehe

 

bro the madass in your sig is a madass xx i dont know y we cant get it in sg. btw wats the damage and where do you service your ride ?

[thrasher]

is it just me, or is domino's pizza using madass as their despatch bikes? i saw a whole lot at bukit timah near al ameen

[stsoh]

DeAD sia this thread,btw i tried putting Voltage stabiliser,Broquet and soon my OORacing CDI from uk....otw soon....hehe.....cdi just install for future port polish+bore up...hehe

 

pls read this regarding fuel saving products like vs n broquet;

http://www.fuelsaving.info/debunk.htm

 

 

i've also tried broquet n below r my personal findings:

 

1) it is a world war two invention, fuel quality is not good then but really bad.

 

2) the one whom invented it doesn't know how it works but it can be lead tat was in it. assume lead was in it then, it is a pollutant n ban for use today.

 

3) i have done fc monitoring n found tat it doesn't save fuel. it still the same fc as b4, placebo effect on the first time of use.

 

4) those whom have claimed it works based on fuel gauge r misled by positive displacement. wat this meant is the bottom shape of the tank is narrower than the top portion thus the fuel gauge will read more when u displace more space, fuel level will goes up. if u dun understand go back to ur science class in secondary school.

 

5) if it claimed to be working, dun u think USA (largest fuel consumers) n rest of the world will be using it instead they were landed more law suit. in sillypore, we dun have consumer protections as in USA. here we have to prove them wrong whereas in USA, product manufacturers have to prove it function scientifically.

Edited February 18, 2010 by stsoh

[red rocket]

pls read this regarding fuel saving products like vs n broquet;

http://www.fuelsaving.info/debunk.htm

 

 

i've also tried broquet n below r my personal findings:

 

1) it is a world war two invention, fuel quality is not good then but really bad.

 

2) the one whom invented it doesn't know how it works but it can be lead tat was in it. assume lead was in it then, it is a pollutant n ban for use today.

 

3) i have done fc monitoring n found tat it doesn't save fuel. it still the same fc as b4, placebo effect on the first time of use.

 

4) those whom have claimed it works based on fuel gauge r misled by positive displacement. wat this meant is the bottom shape of the tank is narrower than the top portion thus the fuel gauge will read more when u displace more space, fuel level will goes up. if u dun understand go back to ur science class in secondary school.

 

5) if it claimed to be working, dun u think USA (largest fuel consumers) n rest of the world will be using it instead they were landed more law suit. in sillypore, we dun have consumer protections as in USA. here we have to prove them wrong whereas in USA, product manufacturers have to prove it function scientifically.

 

I've a broquet (different brand) in my fuel tank. It does seem to save fuel, however it seems to retard the process of the fuel degrading.

 

I ride my bikes about once a month so fuel stays in tank for a long time. I notice that old fuel 'got less power' than fresh fuel. Then the 'broquet' was given to me to try. I find that the difference in 'power' was less although still notable.

 

I will not pay for such device for the high price it is selling.

[stsoh]

if u notice tat nite n day, dry n wet, hot n cold rides give power differences.

track ur fuel consumptions then u will know whether is a fuel saver, it's not.

can u explain in scientific terms how broquet works?

old fuel in ur tank will of course degenerate due to oxidation.

[Prestone]

good,this thread is moving....just becoz of the broquet

[iamlefty]

guys i am wondering if there are any compatible parts from other bikes can that fit our madass ?

[Prestone]

guys i am wondering if there are any compatible parts from other bikes can that fit our madass ?

 

I also donnow bro,iot seems this thread dead and only for arguing....

 

I also need to find where can get spares from other bikes,im thinking fitting 17" rims....

[iamlefty]

I also donnow bro,iot seems this thread dead and only for arguing....

 

I also need to find where can get spares from other bikes,im thinking fitting 17" rims....

 

I also wanna fit 17" man i wonder if wave rims will be good easier to find tires for 17" ijal has done some stuff to his bike too. we just got a throttle and will be fixing it soon. you wanna hang out one of this weekdays in the evening. i will ask ijal too..

[Prestone]

I also wanna fit 17" man i wonder if wave rims will be good easier to find tires for 17" ijal has done some stuff to his bike too. we just got a throttle and will be fixing it soon. you wanna hang out one of this weekdays in the evening. i will ask ijal too..

 

Ble ah,sembarang....but where you guys lepak slalu?

So far,no mods yets,waiting for cdi from OORacing...then rims still sourcing....Moto buat keje je,distance i need...not pick up....maybe nak power sikit je,so far top speed onli 110km/h....with stock condition...

[iamlefty]

Ble ah,sembarang....but where you guys lepak slalu?

So far,no mods yets,waiting for cdi from OORacing...then rims still sourcing....Moto buat keje je,distance i need...not pick up....maybe nak power sikit je,so far top speed onli 110km/h....with stock condition...

 

bro pm me ur contact number..will you b free on thursday nite ?

[Prestone]

bro pm me ur contact number..will you b free on thursday nite ?

 

Alamak,sorry bro,long time didnt log in....i just came back from work...

 

Btw my OORacing cdi has arrived and i already fit it....

 

I noticed better rev control...then when i in kje,had hard time trying to keep speed @70km/h,i like in between open and close throttle,very2 little throttle...

Top speed still havent try and FC still havent see....The bike also rev higher now..

[Prestone]

I also wanna fit 17" man i wonder if wave rims will be good easier to find tires for 17" ijal has done some stuff to his bike too. we just got a throttle and will be fixing it soon. you wanna hang out one of this weekdays in the evening. i will ask ijal too..

 

So far you all did what to the bike?After all mods,whats the top end?

[iamlefty]

So far you all did what to the bike?After all mods,whats the top end?

 

so farr...handlebar, seat rewrapped..sprocket..handguard..handlebar..end can..front restrictor..asv unbreakable 2 finger clutch..decals.. i had it with mikuni now back to stock.. i am considering a new colour..cdi..17"5spoke rims..inverted forks..better rear socks..img wide foot pegs..alot more..cannot think ..bro how bout urs..free next week for coffee ?

[Prestone]

So far,only wrap the whole exhaust with fibre tape,cdi,port the manifold swan neck....dats all for now...i think...

Next week i not sure...coz i work come back late....later im goin to pasir ris costa sands...

[red rocket]

I'm looking for 17 rims also but hard to find leh. Especially 3 inch width. Was hoping to fit 110 or 120 rear.

[Ijalsp]

so farr...handlebar, seat rewrapped..sprocket..handguard..handlebar..end can..front restrictor..asv unbreakable 2 finger clutch..decals.. i had it with mikuni now back to stock.. i am considering a new colour..cdi..17"5spoke rims..inverted forks..better rear socks..img wide foot pegs..alot more..cannot think ..bro how bout urs..free next week for coffee ?

 

Alas!!! This forum is alive now!

HAHA vel, how come i keep seeing your bike listed almost everywhere for sale?

Bro, my bike as days and weeks pass by, its getting from bad to worst! First my meter bracket broke, then now my seat got scratched by cat!! got bigger seat don't want. Want my small cute seat.. haiz... HAHA

 

Anyway, I passed by Mcdonalds near Raffles Hotel that day saw a yellow MA with inverted headlights!! Anyone here?

[red rocket]

Alas!!! This forum is alive now!

HAHA vel, how come i keep seeing your bike listed almost everywhere for sale?

Bro, my bike as days and weeks pass by, its getting from bad to worst! First my meter bracket broke, then now my seat got scratched by cat!! got bigger seat don't want. Want my small cute seat.. haiz... HAHA

 

Anyway, I passed by Mcdonalds near Raffles Hotel that day saw a yellow MA with inverted headlights!! Anyone here?

 

what's new? got mine all changed. First it's the leaking oil seals then screws starts to undo itself.

Edited February 27, 2010 by red rocket

[iamlefty]

Alas!!! This forum is alive now!

HAHA vel, how come i keep seeing your bike listed almost everywhere for sale?

Bro, my bike as days and weeks pass by, its getting from bad to worst! First my meter bracket broke, then now my seat got scratched by cat!! got bigger seat don't want. Want my small cute seat.. haiz... HAHA

 

Anyway, I passed by Mcdonalds near Raffles Hotel that day saw a yellow MA with inverted headlights!! Anyone here?

 

hahaha bro my meter bracket also broke siaaa ccb !!! i am not sellin my ma anymore la..i am keeping it..if i am not riding i will bring up to my hse and keep it in my room lol

[Ijalsp]

what's new? got mine all changed. First it's the leaking oil seals then screws starts to undo itself.

 

Ya man, now mine's starting to leak.. Go shop for repair, uncle always say," aiyah... China mah...." HAHA feel like throwing the spanner at his head!

 

Anyway Vel, when can I take the throttle from you? N I still cant find my rear sprocket!!! KNN!

[red rocket]

Ya man, now mine's starting to leak.. Go shop for repair, uncle always say," aiyah... China mah...." HAHA feel like throwing the spanner at his head!

 

Anyway Vel, when can I take the throttle from you? N I still cant find my rear sprocket!!! KNN!

 

just make sure you don't use Madass OEM.

[Ijalsp]

just make sure you don't use Madass OEM.

 

HAHA! OEM?

That's one thing hard to find in SG.

If its that's easy, it wldn't take me this long just to find the sprocs.

 

Anyway, can you share your experience with the loosening screws so that I can look out for that in the future?

[red rocket]

HAHA! OEM?

That's one thing hard to find in SG.

If its that's easy, it wldn't take me this long just to find the sprocs.

 

Anyway, can you share your experience with the loosening screws so that I can look out for that in the future?

 

 

When the bike was new, I have lost 5 screws in a week. from the seat mount to the pillion foot peg. After leaving the bike with Mah for a week problem solved... no more loose screws.

 

that's only the screws issue.

[Ijalsp]

When the bike was new, I have lost 5 screws in a week. from the seat mount to the pillion foot peg. After leaving the bike with Mah for a week problem solved... no more loose screws.

 

that's only the screws issue.

 

That's "screwed" up man! Haha

 

hey something came across my mine. Do you or anyone here knows whether it's easy to put side boxes on our MA? Or do we need to order the brackets from Europe?

 

One more thing... Anyway to smoothen our ride other then changing the sprocs and use the volt stabilizer?

 

Care to share?

[iamlefty]

That's "screwed" up man! Haha

 

hey something came across my mine. Do you or anyone here knows whether it's easy to put side boxes on our MA? Or do we need to order the brackets from Europe?

 

One more thing... Anyway to smoothen our ride other then changing the sprocs and use the volt stabilizer?

 

Care to share?

 

europe ex la bro i wanna do like h&b style like on those gs..

 

guys where you all service ur asses..lol i dun wanna go to mah..