Woopa!! Cbr1000rr Riders

[RicKTM]

Originally posted by peter7788@Aug 4 2005, 08:58 PM

Korno this is the dyno report after the tunning was set for sepang use ,it was not as lean as the 167bhp,mech scared blow, tashi pinjam your site for a little while will erase post later,can"t attach with PM.

dame nice curves... or should i say straight line???

smoooooooooooth....

[Tashi]

Originally posted by peter7788@Aug 4 2005, 08:58 PM

Korno this is the dyno report after the tunning was set for sepang use ,it was not as lean as the 167bhp,mech scared blow, tashi pinjam your site for a little while will erase post later,can"t attach with PM.

Pete, jangan pretend pretend.

 

Such smooth curves no need to delete.

[peter7788]

Tashi "short Time" how much. IOU ?.....

[tweety64]

Guy, do u know where can i buy the cbr1000rr Full Sevice Manual???

 

And how much izzit?

 

Cos i need it.

I know yahoo auction there's some1 selling at $15 but dont have for a 1000 only have cbr600rr.

[Tashi]

No need to buy, just download. Abang Chilly posted a link a few pages back.

[kornology]

Originally posted by RicKTM@Aug 4 2005, 10:16 PM

dame nice curves... or should i say straight line???

smoooooooooooth....

hmm..i didnt see pun the dyno chart??? hmm..i`m just asking.. coz in malaysia got 2 HRC with full system..one with Full Arrow Racing & 1 with Akra`s.... but whut i heard..the both HRC just got only 164hp for the Arrow & 158hp for the Akra.. that y i mentioned it about the dyno..and a different about EU and japan spec.. coz i got 1 of my frenz was using Giannelli S/O just got only 146Hp... that y i`m just a little bit curios...and whut i heard from magazine the standard power is 153Hp is it? that y i`m bit curios about anether blade was install the PC3 & Giannelli S/O just get 146hp...they said the real power for CBR is just only 143Hp??? Is it True... Can somebody help me about this thing??? :help:

[ashyamahar6]

Ermm Korno stuff like this is hard to say because bike run in differently will have diff bhp and another thing is using different dyno machines, u get instrumental error as one might give consistently 5 bhp higher and another 5 lesser.

 

Only way to know is to dyno ur bike stock at one specific dyno machine, and after putting all the aftermarket, dyno ur bike again at the same dyno machine.

 

I dont think im helping u much here but u get the point right ...

[LastDance]

guys there's this sqeaky sound from the front of my bike.

whilst moving slowly, u can hear it come n go, kind of systematic and in rotations thus i believe is the brake discs problem. sound also goes away when i use the front brake. touched the 2 front discs and noticed 1 side is hotter than the other.

 

any idea how much it cost to replace an original disc if it is deformed/bent? or is it repairable?

[Tashi]

Originally posted by peter7788@Aug 4 2005, 10:51 PM

Tashi "short Time" how much. IOU ?.....

A PC3 will do fine thank you very much.

 

Korno, where to dyno in KL and how much? Japanese bike confirm power cut!

 

Bring your bike to BS, they have an apparatus to check whether disc brake is deformed or not. But I think you're being paranoid.

[LastDance]

Originally posted by Tashi@Aug 5 2005, 03:46 PM

A PC3 will do fine thank you very much.

 

Korno, where to dyno in KL and how much? Japanese bike confirm power cut!

 

Bring your bike to BS, they have an apparatus to check whether disc brake is deformed or not. But I think you're being paranoid.

u mean this sound is normal?

[kornology]

Originally posted by Tashi@Aug 5 2005, 03:46 PM

Korno, where to dyno in KL and how much? Japanese bike confirm power cut!

 

In KL... got 2 shop 2 dyno it..1 in suway...they call Sunvay Cycle..was formely owned by Ah hoi... this shop are most popular for all MSS racer to do a dyno... and one more shop in kelang..at Chear Motor...this shop is new for the dyno.. i donno where to send my bike for dyno..coz in M`sia its cost me all the thing from PC3-installation-dyno-mapping about RM1800...so..how much in S`pore tashi???

[Edwin]

Originally posted by kornology@Aug 5 2005, 05:10 PM

In KL... got 2 shop 2 dyno it..1 in suway...they call Sunvay Cycle..was formely owned by Ah hoi... this shop are most popular for all MSS racer to do a dyno... and one more shop in kelang..at Chear Motor...this shop is new for the dyno.. i donno where to send my bike for dyno..coz in M`sia its cost me all the thing from PC3-installation-dyno-mapping about RM1800...so..how much in S`pore tashi???

i did mine with PC3 installation, dyno and mapping cost me less than $650 sing dollars

[Tashi]

LD, yes. Sometimes the pads do rub against the discs slightly.

 

If you have an EBC pad, you will realize there a zinnnnnnnnnngggg sound. Like an electrical buzz. Even on other bikes.

 

Korno, how much is just a dyno test? I think you meant Sunway Cycle.

 

Stock blade rear wheel hp is around 152, and torque around 80.

 

You guys have a great weekend. I will be away.

 

Abang Chilly, take lots of pix at the track.

[LastDance]

Originally posted by Tashi@Aug 5 2005, 06:36 PM

LD, yes. Sometimes the pads do rub against the discs slightly.

 

If you have an EBC pad, you will realize there a zinnnnnnnnnngggg sound. Like an electrical buzz. Even on other bikes.

 

Korno, how much is just a dyno test? I think you meant Sunway Cycle.

 

Stock blade rear wheel hp is around 152, and torque around 80.

 

You guys have a great weekend. I will be away.

 

Abang Chilly, take lots of pix at the track.

Yes it's the ziiiiiinnnnnng sound very irritating

[tweety64]

Originally posted by Tashi@Aug 5 2005, 07:44 AM

No need to buy, just download. Abang Chilly posted a link a few pages back.

Calling 'Abang Chilly'!!

 

Can u post/PM the cbr1000rr service manual link for me???

Thk.....

[chilly]

Originally posted by tweety64@Aug 6 2005, 02:54 AM

Calling 'Abang Chilly'!!

 

Can u post/PM the cbr1000rr service manual link for me???

Thk.....

CBR 1000 RR Service Manual & Parts Catalog

 

Click the CBR stuff at the left hand corner.

[Raptor]

Me going to Sepang to play for a weekend.

 

Saturday 20th Aug- 4.30PM to 6.30PM.

Sunday 21st Aug- 9AM to Noon.

 

Anyone else interested? Edwin??

[Raptor]

Anyone interested in going to Marbella Pub and Bistro this evening for dinner?

Me probably crossing 2nd link at 6.00 PM.

[Edwin]

Originally posted by Raptor@Aug 6 2005, 08:33 AM

Me going to Sepang to play for a weekend.

 

Saturday 20th Aug- 4.30PM to 6.30PM.

Sunday 21st Aug- 9AM to Noon.

 

Anyone else interested? Edwin??

my group will not be going cos chinese 7th month. we always aviod going during this month of the year

[kornology]

650 sing?uiks..when i times it with RM...its still RM14++...hmmm... still cheaper in singapore... if u du just mamping here..its coz us Rm380.. yes tashi sunway cycle..but right now..the name has been change to Sunvay Cycle...coz..if not..they have been summons by Sunway Land Properties....Hm...could be somebody can guide me..to do a Dyno in S`pore...and then shopping at there...hehehe..

[Edwin]

Originally posted by kornology@Aug 6 2005, 10:46 AM

650 sing?uiks..when i times it with RM...its still RM14++...hmmm... still cheaper in singapore... if u du just mamping here..its coz us Rm380.. yes tashi sunway cycle..but right now..the name has been change to Sunvay Cycle...coz..if not..they have been summons by Sunway Land Properties....Hm...could be somebody can guide me..to do a Dyno in S`pore...and then shopping at there...hehehe..

you can go to Unity in Bukit Merah and look for ah xiong. as for the price, you might not get wat I am having bro. but I think it shd still be cheaper than KL.

[jerryGSR]

Dear Bladers.....

 

I am in a fix.... the current rider of my Blade haf lost the one and onli ignition key.....

 

WAT CAN I DO?

 

BTW i am oso lookin for somebody to COI my Blade..... cos the cureent rider haf some problems and cant keep the bike.....

 

anyone interested. pls PM me......

[Sesshou]

Originally posted by Jerry858@Aug 6 2005, 06:39 PM

Dear Bladers.....

 

I am in a fix.... the current rider of my Blade haf lost the one and onli ignition key.....

 

WAT CAN I DO?

 

BTW i am oso lookin for somebody to COI my Blade..... cos the cureent rider haf some problems and cant keep the bike.....

 

anyone interested. pls PM me......

go back to the shop you bought the bike get the spare key from them. then brig it to boon siew to make a copy one. or you can make the spare key at this bike shop . Ban Hong Geok Kee co at amk ind park 2

[Raptor]

Originally posted by Hikaru@Aug 7 2005, 11:32 AM

go back to the shop you bought the bike get the spare key from them. then brig it to boon siew to make a copy one. or you can make the spare key at this bike shop . Ban Hong Geok Kee co at amk ind park 2

You cannot just get any blank duplicate key and cut to shape and expect it to work. The Honda Ignition Security System (HISS) will not allow that since it has a proximity sensor built into it. The original keys have a chip in them which will enable the HISS to start the bike.

 

The original keys of the bikes come with a metallic tag which has numbers on it. Those numbers are the key codes. You need to get the duplicate with the same codes and then cut to shape.

 

I have asked before and was told that the original blank keys are $60 each.

 

Dun wanna be a wet blanket but the worse scenario is changing the entire ignition system.... and that's gonna coz quite a few hundred bucks.

 

As for the rest of the other Bladers... keep your spare key in a safe place and do take note of the key ID tag numbers.

 

I asked for the spare keys from Looi's when I bought the bike. You dun ask, they normally keep it but how safe they keep it I really don't know.

[Sesshou]

Originally posted by Raptor@Aug 7 2005, 01:32 PM

You cannot just get any blank duplicate key and cut to shape and expect it to work. The Honda Ignition Security System (HISS) will not allow that since it has a proximity sensor built into it. The original keys have a chip in them which will enable the HISS to start the bike.

 

The original keys of the bikes come with a metallic tag which has numbers on it. Those numbers are the key codes. You need to get the duplicate with the same codes and then cut to shape.

 

I have asked before and was told that the original blank keys are $60 each. 

 

Dun wanna be a wet blanket but the worse scenario is changing the entire ignition system.... and that's gonna coz quite a few hundred bucks.

 

As for the rest of the other Bladers... keep your spare key in a safe place and do take note of the key ID tag numbers.

 

I asked for the spare keys from Looi's when I bought the bike. You dun ask, they normally keep it but how safe they keep it I really don't know.

what!!!!!!! original blank keys are $60 each.

 

i know the key have a chip in it . i was saying this shop also do the programing of the key. and by the way it only can be dulplicated 4 times only, after that you have to chage a new entire ignition system.

 

programing of the key is only $60. you can just get a blank dulplicte key anywhere less then $15