Woopa!! Cbr1000rr Riders

[DenverDino]

hmmm. your aftermarket stuffs actually give better fc huh...

 

what could have cause my fc to be so bad?

 

If PC3 is on the wrong settin i think the FC will make different. Or you want more power on your low and mid power this will oso cause the problem.

[Wayang]

2. So should I start my bike and go for a cuppa while it warms up, or just ride off gently?

Open to debate. Some prefer to leave the bike idling for a miunte or so before riding away. The idea is that letting the engine idle places minimum stress on the cold, poorly lubricated components and gives oil a chance to circulate and protect them.

 

The other school of thought is that it's best to ride away gently as soon as you start the bike, to burn off any excess fuel, as leaving unburnt petrol in the bores could cause damage. All engines need more fuel in the mixure to start (bikes with carburettors had a choke to achieve this, fuel injected bikes take care of it themselves). However, petrol is a very effective de-greaser and if any is left unburnt in the cylinder it can wash the oil from the bores, leaving the pistons scraping along them. This is only an issue at start up, when the engine is running rich. When it's warm (or the choke's off) you should have the perfect amount of juice.

 

source : http://www.singaporebikes.com/forums/showthread.php?t=73306

 

do both la.. let it idle for a while then ride off gently

[NightPhantom]

no lar.. that 1 i cut and paste from the link 1... i warm up 1min++ den ride off gently.... and i really do mean gently.... coz i dont feel its good to let it run so long.. besides... waste fuel.

[dafeimao85]

Hi guys!!! sorry 4 the long MIA!!! wats up?

[ghost04]

nothing much...yesterday some MTFKR stole my battery at my house car park...

tat feller better die using my battery...no $$ for battery then don ride!

to the farker : U R Being Marked n Cursed. watch out.

[ghost04]

hmmm. your aftermarket stuffs actually give better fc huh...

 

what could have cause my fc to be so bad?

 

well depend on how u tune it...default honda bikes are on the richer side...

i tuned mine for more low n mid as i don play top speed...

at the same time adjust the air/fuel ratio accordingly...

on the dyno run leaner gives u more HP less torque...

run richer gives u less HP more torque..

[DenverDino]

Hi guys!!! sorry 4 the long MIA!!! wats up?

 

Feimao....can ask a favour from you. Pls upload a close look of your ARROW exhaust. Thanks

[kinwei]

its not advisable to leave the bike idling for a very long time eg. warm up.

something inside will be damaged over time.

read it in bike mags..

one stick time or ard 40++ deg slowly move off...

in europe their manual say can just ride away once start some more..

 

 

For me warm up is generally to let the internal fully expand as per when it is during the normal riding temperature. For example the normal riding temperature is 80+degree. So let just assume by then the internal had been expanded till that temperature. So by idling till around 70 degree, the internal would have been expand till about there liao.

 

The only reason I can think of why it is bad to idle for too long is the loading of electricity consumption on the battery and rectifier. As during idling, the generating of electricity is the lowest. It about not being able to supply the demand.

 

But hor, actually I don't really care much about this thing warm up thing lah . It just that the time I took to fold and keep my bike cover and put on my helmet, just nice hit the time the auto choke off at 70 degree lor.

 

To me, if bike spoil, just fix lor. Tio bor?

[d3an_cain]

saw a 08 repsol n 06 repsol @ diffrent occasion just now.. both were spotted @ jurong.. any 1 from here? nice bike..

[Yongster]

Wah...you never end meh. Until today you still mention his secret weapon. :faint:

tat one will say for life.........

[Yongster]

tats pretty bad...

i average 250-270km b4 lights up..travel 110-120 most of the time..

scorpion slip-on + K&N filter + PCIII

when i first got it full stock was ard 230++..

no matter how hard i whack also nvr go below 200km..

average 19-20km/l..

yr FC so good?? mine 200 then reserve liao... my set up almost same except for exhaust......

[kinwei]

tat one will say for life.........

 

My next project is to install more gadget on my bike liao. Like James Bond vehicle liao... Coming soon, FROM THE FRONT! You better watch out!

[Yongster]

My next project is to install more gadget on my bike liao. Like James Bond vehicle liao... Coming soon, FROM THE FRONT! You better watch out!

i not worried about that.... it's not possible tat i will be in front of u..... i not in yr league when it comes to speed.......

[kinwei]

i not worried about that.... it's not possible tat i will be in front of u..... i not in yr league when it comes to speed.......

 

What I mean is coming from the FRONT of you. Means I am in front of you firing my next secret weapon

[Dr M]

Hi CBR bros, for those who are a fan of AH MENG's work, he is back in SG. You may drop by with ur bike at RPM Moto (Autobay Kaki Bukit, Lvl 2). Cheers`

[Yongster]

What I mean is coming from the FRONT of you. Means I am in front of you firing my next secret weapon

won't wan lah...... u will be very far ahead of mi so i won't kena..... tat incident in KL was a miscalculation on my part.... u will never get mi again!!!!!

[dafeimao85]

Hi CBR bros, for those who are a fan of AH MENG's work, he is back in SG. You may drop by with ur bike at RPM Moto (Autobay Kaki Bukit, Lvl 2). Cheers`

 

Who's Ah Meng?

[Dr M]

Who's Ah Meng?

 

haha...yes gd question. he's a very good mechanic for those who knows him. Just spreading the word around incase those who likes to service or do bikes with him but don't know where he is now. cheers`

[Jonest]

nothing much...yesterday some MTFKR stole my battery at my house car park...

tat feller better die using my battery...no $$ for battery then don ride!

to the farker : U R Being Marked n Cursed. watch out.

 

Huh.. Did i see wrongly, buddy...

Battery also can get stolen.. Battery is under your seat, and able to remove battery and remove wiring must be a quite something chap..

Buddy, sorry to hear that...

 

Damn it..

[Wayang]

My next project is to install more gadget on my bike liao. Like James Bond vehicle liao... Coming soon, FROM THE FRONT! You better watch out!

 

twin machine guns ?

[dafeimao85]

Feimao....can ask a favour from you. Pls upload a close look of your ARROW exhaust. Thanks

 

lazy to upload u add me @ msn, i forward u lor?

[dafeimao85]

any 1 know any of the RR10 info??? heard recession due, V5 1000cc delay AGAIN!!!

[kinwei]

Dino and I are trying to organise a Pasir Gudang Trackday on the 19th Oct 2009, MONDAY. The timing and meetup venue to be confirm at a later date. However I am suggesting we can split into 2 groups, one going in by 1st link and the other group by 2nd link.

 

For those interested, just add in your name to the list first and we will discussed the detail later.

 

1) Dino

2) Kinwei (1st link)

3) Rstopel (1st link, only if dry)

4) Jemster (2nd link)

5) Rojryder(2nd link)

6) vsion (1st link)

 

Alright, my leave approved liao.. so I am going. However now I am emailing Pasir Gudang to confirm if they are open on that day or not. So keep your finger cross.

 

For those who doesn't know or forget, I extract some information from PG website for your infom,

 

1) Weekdays rate is rm35 per hour

 

2) Morning session for bikes start at 1030am~1130am, 1130am~1230pm. So for morning to noon, only can play 2 hours. Anyway I should be going for an hour only.

 

3) Minimum safety requirements for track hirer to practice on the track.

 

1. Leather jacket or touring jacket with shoulder and elbow guard.

 

2. Jeans

 

3. Full leather gloves

 

4. Leather shoes which cover ankles

 

5. Full face approved helmet.

 

 

So based on the timing, we got to meet up at least 9am at 1st link and maybe 830am at 2nd link. Expect to arrive PG at around 10am. So we will have around 1/2 hours to prep your bikes, put up your makeup and dresses. Just nice for 1030am session.

Edited October 6, 2009 by kinwei

[kinwei]

any 1 know any of the RR10 info??? heard recession due, V5 1000cc delay AGAIN!!!

 

Tashi posted it sometime ago. Mainly not much changes except for the colour scheme and a heavier mass crankshaft.

[Sn0w_MaN]

check with u guys... alot of ppl over here have after market pipe.... it's true that if you install a legal slip on the max out the usage or power it's better to install pc3 or without pc3 it will work as good as well.

 

I mean usage / power are not refering to track, more of not to waste the purpose of the item.