SBF Fino Riders Cafe. 2009 / 2010

[Walabam]

oic. How much were you charged?

[keyxblade]

Hi ppl, where do u all usually go to service fino? my friend just bought fino. dont know go where service.

[keyxblade]

double post................

[Walabam]

Hi ppl, where do u all usually go to service fino? my friend just bought fino. dont know go where service.

 

I serviced my Fino for three times at different shops. First was ASPhoon, second was Wing Yap and third was Unique Motorsports.

 

I suggest you go to Unique for servicing because they have price lists that customers can see on SBF, and they do it really fast. Tyre price (Michelin M29s, got charged $65x2 = $130 tyre at WY) also cheaper than Wing Yap. Unique offering Michelin M29S at $100 now, even the usual price ($111) also cheaper than WY. WY, though, has great service, everyone is friendly there.

[keyxblade]

I serviced my Fino for three times at different shops. First was ASPhoon, second was Wing Yap and third was Unique Motorsports.

 

I suggest you go to Unique for servicing because they have price lists that customers can see on SBF, and they do it really fast. Tyre price (Michelin M29s, got charged $65x2 = $130 tyre at WY) also cheaper than Wing Yap. Unique offering Michelin M29S at $100 now, even the usual price ($111) also cheaper than WY. WY, though, has great service, everyone is friendly there.

 

thanks. my friend fino keep engine stall on slope when she goes home from her workplace. the slope is a shopping centre carpark, Anyone know whats the problem or any suggest to solve this, change a new exhaust?

[Walabam]

thanks. my friend fino keep engine stall on slope when she goes home from her workplace. the slope is a shopping centre carpark, Anyone know whats the problem or any suggest to solve this, change a new exhaust?

 

When she turns the throttle, does the throttle feel slow in response (e.g. engine responds after a few seconds when the throttle is turned)? The engine may be cold. Tell her to try starting the engine and leaving it on for 1-2 (2-3 mins is ideal, but I doubt anyone has patience at this level) minutes before riding off. Or, if she uses the choke to start the scooter (when there is difficulty starting the bike), tell her to leave the choke on when driving off, but make sure she remembers to close it after a minute or two of riding. If these methods don't work, I suggest she brings it to a mechanic.

[keyxblade]

When she turns the throttle, does the throttle feel slow in response (e.g. engine responds after a few seconds when the throttle is turned)? The engine may be cold. Tell her to try starting the engine and leaving it on for 1-2 (2-3 mins is ideal, but I doubt anyone has patience at this level) minutes before riding off. Or, if she uses the choke to start the scooter (when there is difficulty starting the bike), tell her to leave the choke on when driving off, but make sure she remembers to close it after a minute or two of riding. If these methods don't work, I suggest she brings it to a mechanic.

 

okay thanks. may be this saturaday go unqiue see what they say

[keyxblade]

When she turns the throttle, does the throttle feel slow in response (e.g. engine responds after a few seconds when the throttle is turned)? The engine may be cold. Tell her to try starting the engine and leaving it on for 1-2 (2-3 mins is ideal, but I doubt anyone has patience at this level) minutes before riding off. Or, if she uses the choke to start the scooter (when there is difficulty starting the bike), tell her to leave the choke on when driving off, but make sure she remembers to close it after a minute or two of riding. If these methods don't work, I suggest she brings it to a mechanic.

 

okay thanks. may be this saturaday go unqiue see what they say

[Walabam]

okay thanks. may be this saturaday go unqiue see what they say

 

Hope everything turns out well then

[Walabam]

okay thanks. may be this saturaday go unqiue see what they say

 

Hope everything turns out well then

[Mark Yeow]

thanks. my friend fino keep engine stall on slope when she goes home from her workplace. the slope is a shopping centre carpark, Anyone know whats the problem or any suggest to solve this, change a new exhaust?

 

you probably might need make a flush to the carburetor... otherwise please check the clutch and transmission parts.

[Hakim54]

Hi guys..I'm looking for used BMC or K&N Air Filter, if u guys intend to sell pls beep me at 8268 2193. Thanks in advance!

[Hakim54]

Need your advice..bike have went for full servicing, from EO, spark plug, air filter, carburetor, belting, etc..the problem is, the bike always stall event after warm-up. Even with choke it doesn't help, bike still stall after warm-up So everytime I will have to play with throttle instead of choke for warm-up. Did any of u guys encounter the same?

[Hakim54]

Is the bike problem solve?

[Walabam]

Need your advice..bike have went for full servicing, from EO, spark plug, air filter, carburetor, belting, etc..the problem is, the bike always stall event after warm-up. Even with choke it doesn't help, bike still stall after warm-up So everytime I will have to play with throttle instead of choke for warm-up. Did any of u guys encounter the same?

 

That's weird...have you told the mechanic the problem?

[Walabam]

Need your advice..bike have went for full servicing, from EO, spark plug, air filter, carburetor, belting, etc..the problem is, the bike always stall event after warm-up. Even with choke it doesn't help, bike still stall after warm-up So everytime I will have to play with throttle instead of choke for warm-up. Did any of u guys encounter the same?

 

That's weird...have you told the mechanic the problem?

[Hakim54]

I send to unique..they told me need to change new carburator. That will cost $195. The things is I just send my bike to Hong Leong for full servicing, including carburator. The Labour itself for carburator service is $100. Let me repeat $100 just for Labour. Almost giving up riding this Fino. Haiz..I'm just lost duno wat to do..

[Walabam]

I send to unique..they told me need to change new carburator. That will cost $195. The things is I just send my bike to Hong Leong for full servicing, including carburator. The Labour itself for carburator service is $100. Let me repeat $100 just for Labour. Almost giving up riding this Fino. Haiz..I'm just lost duno wat to do..

 

I suggest you go back to Hong Leong again and confront them with the problem, since they're the ones that serviced your bike. Did this happen before the servicing, though? You paid for the servicing, so it's only right if you tell them that they didn't do a good job.

[Walabam]

I send to unique..they told me need to change new carburator. That will cost $195. The things is I just send my bike to Hong Leong for full servicing, including carburator. The Labour itself for carburator service is $100. Let me repeat $100 just for Labour. Almost giving up riding this Fino. Haiz..I'm just lost duno wat to do..

 

I suggest you go back to Hong Leong again and confront them with the problem, since they're the ones that serviced your bike. Did this happen before the servicing, though? You paid for the servicing, so it's only right if you tell them that they didn't do a good job.

[Oreo]

Hi, I'm looking for used fino.. Preferably 2 to 3 years old.

 

Pm me, thanks!

[Tanarthur]

Many selling at the used bike thread, bike mart and sgbikemart...

[Tanarthur]

Anyone still around?

[Tanarthur]

FYI....

 

WTS Yoshi FS for Fino http://www.singaporebikes.com/forums/showthread.php?t=416335

 

 

Let's just ride....

[Walabam]

FYI....

 

WTS Yoshi FS for Fino http://www.singaporebikes.com/forums/showthread.php?t=416335

 

 

Let's just ride....

 

Damn..wished I saw this post earlier...I just paid deposit for a new Yoshi pipe...lol

[Tanarthur]

How much did you paid for the pipe? Can ask for refund?

 

 

Let's just ride....