BRAKING Wave Rotors and Brake Pads - Power Under Control (Made in Italy)

[Unique_Motorsports]

'BRAKING' Brake Pads - Power Under Control

BRAKING Brake Pads now available at Unique Motorsports.

 

http://www.motovation-accessory.com.sg/images/article/7/brakingtop.gif

 

Braking was created in 1990 and immediately expressed its original ideas, which created the base for its future success, led by the strong certainty to be able to produce something new, in a sector, where everyone thought almost everything had already been expressed, and which was in the hands of few leading companies.

Their strong presence in this difficult market made of high-technology products led Braking to a constant and fast evolution, which took them to today's important productive reality.

Always committed to the race world, where Braking has obtained great success in the whole world, they've been able to propose technologically advanced solutions, easy to be accepted by everyone.

Starting from the oversize off-road and scooter kits, to the famous and unusual perimetral kit and then to the wave disks: these are the important steps which made our company a leader in the whole world.

Now Braking represents one of the most important realities in the after-market world of brake systems, and is the only company which can offer a valid alternative to the traditional round disk.

Braking is located north of Milan in the middle of Brianza, it covers a surface of 3000m2, has super-modern equipment and a specialized and very motivated staff.

 

http://www.motovation-accessory.com.sg/images/article/7/padslogo.gif

 

BRAKING have a large range of pads dedicated for every kind of motorcycle. Braking pads are available in several compounds created for every type of use. The basic material they use is particularly high for a coefficeient of friction. Mixed to a soft, non-aggressive metal component that serves as a kind of lubricant so that the pads on the brake better glide. That is the secret of unbelievably good, with a soulful BRAKING braking system - the driver always retains full control.

 

BRAKING brake pads are compatible with discs such as forged from cast iron and stainless steel, of course, particularly suited for use with our brakes for optimum braking and control. A combination of BRAKING-coverings with BRAKING discs is the best choice for best braking at full modularity.

 

Price: $65 each set with installation

Wave Disc:

BRAKING have invented the WAVE disk (see the photo) and, in doing so, have revolutionized the concept of braking. Thanks to several studies regarding deformation of metallic material and heat dissipation, BRAKING have increased the limit of the performance of stainless steel discs. Today a lot of teams use the Wave disks for racing, the same disks that are sold by our dealers.

 

All the BRAKING discs are made from stainless steel with a high percentage of carbon that has a high friction coefficient. The round discs, front and rear, keep the same measurements of the OEM disks, with more performance.

Braking wave discs are available fixed or floating in accordance with the OEM or update to the OEM oversize.

The floating discs of the STX series have the carriers made of black oxidized aluminum. The wave disks are available for (the) most of the bikes sold from the nineties in street category, off-road and scooter.

 

http://www.motovation-accessory.com.sg/images/article/7/diskstop.gif

 

STX: STX street uses the good high-carbon stainless steel, It is superior in the control characteristic like the cast iron. Inner uses the 7075-T6 Dura aluminum and has become floating type (fixing).

 

SK: The SK disk which was developed with Braking and domestic Sunstar Incorporated jointly as a wave disk of 07 models. It is called SK with use as a street and a one for race/lace. And use individually for Left and Right only.

 

S3: Wave semi-floating disc. Disc material and construction way: laser cut stainless steel AISI420, heat treated + finished on CNC machines.

 

 

BRAKING Wheels:

B-One project was born in the R&D Braking department, aiming at revolutionizing the fixing system of the disk onto the wheel, by improving the performances and at the same time reducing the number of components. Latest innovation Braking is the complete aluminum - Wheels - system called "B-ONE". Made by OZ, B-One are Aluminum Forged wheels.

 

Unifying forged elements with a special wheel, allows to avoid all non rigid connections, in order to give the system a superior rigidity level.

Also, getting the weight of the wheel’s axis closer, allows a lower gyroscopic effect, thus improving its handling, stability, and entering the curves on a motorcycle.

Braking wanted to give a new added value to the rotation masses, by creating a one-piece integrated group made of disk-hub & wheel, in order to decrease the inertias.

 

Wave disks integrated in a totally new wheel composed of fused and forged elements

A new solution to obtain incomparable performance, design and costs.

 

http://www.motovation-accessory.com.sg/images/article/7/wheelstop.gif

Kit Includes:

 

FRONT: Braking one-piece nine spoke wheel made of aluminum complete with floating wave disks

REAR: Braking one-piece nine spoke wheel made of aluminum, complete with wave disk, rubber bushing and aluminum sprocket 7075T6.

 

R1 07/08: $3000 with installation

GSX 1000R 09: $3000 with installation

 

Gilera VXR200/ST200 2006-09 Front BRAKING Wave Disc

 

http://i600.photobucket.com/albums/tt84/uniquemotor4/GileraVXR200-0609wavedisc.jpg

 

Braking has finally made a Front Wave Disc for Gilera VXR200/ST200 2006-09. BRAKING SM1 brake pads for the disc are also available.

 

Gilera VXR200/ ST200 2006-09

Front BRAKING Wave Disc: $170 with installation

Front BRAKING SM 1 Brake pad: $45 with installation

 

BRAKING Front Brake Disc + BRAKING brake Pad for Yamaha Sparkz 135 / X1R 135 ($130)

 

http://i600.photobucket.com/albums/tt84/uniquemotor4/BRAKINGSparkz.jpg

 

$130 BRAKING PACKAGE (UP $150)

- BRAKING Front Brake Disc x 1pc

- Installation

 

Specially Made for Singapore Yamaha Spark 135 and X1R 135!

While stock last!

 

BRAKING Wheels:

B-One project was born in the R&D Braking department, aiming at revolutionizing the fixing system of the disk onto the wheel, by improving the performances and at the same time reducing the number of components. Latest innovation Braking is the complete aluminum - Wheels - system called "B-ONE". Made by OZ, B-One are Aluminum Forged wheels.

 

Unifying forged elements with a special wheel, allows to avoid all non rigid connections, in order to give the system a superior rigidity level.

Also, getting the weight of the wheel’s axis closer, allows a lower gyroscopic effect, thus improving its handling, stability, and entering the curves on a motorcycle.

Braking wanted to give a new added value to the rotation masses, by creating a one-piece integrated group made of disk-hub & wheel, in order to decrease the inertias.

 

Wave disks integrated in a totally new wheel composed of fused and forged elements

A new solution to obtain incomparable performance, design and costs.

 

http://www.motovation-accessory.com.sg/images/article/7/wheelstop.gif

Kit Includes:

 

FRONT: Braking one-piece nine spoke wheel made of aluminum complete with floating wave disks

REAR: Braking one-piece nine spoke wheel made of aluminum, complete with wave disk, rubber bushing and aluminum sprocket 7075T6.

 

$3000 GSX 1000R 07/08 Package:

- FRONT: Braking one-piece nine spoke wheel made of aluminum complete with floating wave disks

- REAR: Braking one-piece nine spoke wheel made of aluminum, complete with wave disk, rubber bushing and aluminum sprocket 7075T6.

- Installation

 

$3000 R1 07/08 Package:

- FRONT: Braking one-piece nine spoke wheel made of aluminum complete with floating wave disks

- REAR: Braking one-piece nine spoke wheel made of aluminum, complete with wave disk, rubber bushing and aluminum sprocket 7075T6.

- Installation

 

Ready stock. While stock last!

Edited August 8, 2011 by Unique_Motorsports

[inspire85]

Upzzz.. Heard alot of good comments abt BRAKING brake pads from frens.. Now that u all bring in, can change at ur shop liao.. Boss, wad's the price?

[Unique_Motorsports]

Upzzz.. Heard alot of good comments abt BRAKING brake pads from frens.. Now that u all bring in, can change at ur shop liao.. Boss, wad's the price?

Price: $65 each set with installation

[rayhunter]

Price: $65 each set with installation

 

so for CB400 it will be $195 for 3 pairs ya?

[Unique_Motorsports]

so for CB400 it will be $195 for 3 pairs ya?

Yup. You are right.

[SeribuCC]

How about R6 07??

[Unique_Motorsports]

How about R6 07??

You have a PM.

[moto_fly]

any pads for gilera??? sm1? cm55??

[Unique_Motorsports]

any pads for gilera??? sm1? cm55??

Sorry, we do not have BRAKING brake pads for scooters.

[nesquik]

kelvin,the brake pump include the lever?can fit spec3?

[Unique_Motorsports]

kelvin,the brake pump include the lever?can fit spec3?

Yes. Include brake lever. Can fit Spec 3.

[warrior.c.o.n.p]

hw much will it cost if diy braking brand brake pad??

[Unique_Motorsports]

hw much will it cost if diy braking brand brake pad??

You have a PM.

[juraimi]

'BRAKING' Brake Pads - Power Under Control

BRAKING Brake Pads now available at Unique Motorsports.

 

http://www.motovation-accessory.com.sg/images/article/7/brakingtop.gif

 

Braking was created in 1990 and immediately expressed its original ideas, which created the base for its future success, led by the strong certainty to be able to produce something new, in a sector, where everyone thought almost everything had already been expressed, and which was in the hands of few leading companies.

Their strong presence in this difficult market made of high-technology products led Braking to a constant and fast evolution, which took them to today's important productive reality.

Always committed to the race world, where Braking has obtained great success in the whole world, they've been able to propose technologically advanced solutions, easy to be accepted by everyone.

Starting from the oversize off-road and scooter kits, to the famous and unusual perimetral kit and then to the wave disks: these are the important steps which made our company a leader in the whole world.

Now Braking represents one of the most important realities in the after-market world of brake systems, and is the only company which can offer a valid alternative to the traditional round disk.

Braking is located north of Milan in the middle of Brianza, it covers a surface of 3000m2, has super-modern equipment and a specialized and very motivated staff.

 

http://www.motovation-accessory.com.sg/images/article/7/padslogo.gif

 

BRAKING have a large range of pads dedicated for every kind of motorcycle. Braking pads are available in several compounds created for every type of use. The basic material they use is particularly high for a coefficeient of friction. Mixed to a soft, non-aggressive metal component that serves as a kind of lubricant so that the pads on the brake better glide. That is the secret of unbelievably good, with a soulful BRAKING braking system - the driver always retains full control.

 

BRAKING brake pads are compatible with discs such as forged from cast iron and stainless steel, of course, particularly suited for use with our brakes for optimum braking and control. A combination of BRAKING-coverings with BRAKING discs is the best choice for best braking at full modularity.

 

Price: $65 each set with installation

Wave Disc:

BRAKING have invented the WAVE disk (see the photo) and, in doing so, have revolutionized the concept of braking. Thanks to several studies regarding deformation of metallic material and heat dissipation, BRAKING have increased the limit of the performance of stainless steel discs. Today a lot of teams use the Wave disks for racing, the same disks that are sold by our dealers.

 

All the BRAKING discs are made from stainless steel with a high percentage of carbon that has a high friction coefficient. The round discs, front and rear, keep the same measurements of the OEM disks, with more performance.

Braking wave discs are available fixed or floating in accordance with the OEM or update to the OEM oversize.

The floating discs of the STX series have the carriers made of black oxidized aluminum. The wave disks are available for (the) most of the bikes sold from the nineties in street category, off-road and scooter.

 

http://www.motovation-accessory.com.sg/images/article/7/diskstop.gif

 

STX: STX street uses the good high-carbon stainless steel, It is superior in the control characteristic like the cast iron. Inner uses the 7075-T6 Dura aluminum and has become floating type (fixing).

 

SK: The SK disk which was developed with Braking and domestic Sunstar Incorporated jointly as a wave disk of 07 models. It is called SK with use as a street and a one for race/lace. And use individually for Left and Right only.

 

S3: Wave semi-floating disc. Disc material and construction way: laser cut stainless steel AISI420, heat treated + finished on CNC machines.

 

 

Wheels:

B-One project was born in the R&D Braking department, aiming at revolutionizing the fixing system of the disk onto the wheel, by improving the performances and at the same time reducing the number of components. Latest innovation Braking is the complete aluminum - Wheels - system called "B-ONE". Made by OZ, B-One are Aluminum Forged wheels.

 

Unifying forged elements with a special wheel, allows to avoid all non rigid connections, in order to give the system a superior rigidity level.

Also, getting the weight of the wheel’s axis closer, allows a lower gyroscopic effect, thus improving its handling, stability, and entering the curves on a motorcycle.

Braking wanted to give a new added value to the rotation masses, by creating a one-piece integrated group made of disk-hub & wheel, in order to decrease the inertias.

 

Wave disks integrated in a totally new wheel composed of fused and forged elements

A new solution to obtain incomparable performance, design and costs.

 

http://www.motovation-accessory.com.sg/images/article/7/wheelstop.gif

Kit Includes:

 

 

FRONT: Braking one-piece nine spoke wheel made of aluminum complete with floating wave disks

REAR: Braking one-piece nine spoke wheel made of aluminum, complete with wave disk, rubber bushing and aluminum sprocket 7075T6.

 

 

Braking Forged Master Pump

Braking New Forged Master Pump with/ without Integrated Reservoir.

Available in 16m or 19mm Piston

Brakelight Switch and mirror mount included.

 

Price: $470 with installation

 

cn be install on super 4 vtec 2?

[Unique_Motorsports]

cn be install on super 4 vtec 2?

Yes, available for Super 4.

[Unique_Motorsports]

Braking Wave Rotor Availability for:

 

Honda Vtec1/2/3 Braking Front Wave Rotor $450each

Honda Vtec1/2/3 Braking Rear Wave Rotor $240each

Honda Revo Braking Front Wave Rotor ( Non- ABS ) $450each

Honda Revo Braking Rear Wave Rotor $240each

 

Aprilia RS125 2006-09 Braking Front Wave Rotor $450each

 

Suzuki DRZ400SM 310mm Braking Front Wave Rotor $450each

Suzuki DRZ400SM Braking Rear Wave Rotor $240each

 

Honda CBR1000RR 2008-09 Braking Front Wave Rotor $450each

Honda CBR1000RR 2008-09 Braking Rear Wave ROtor $240each

 

TMAX 500 2008-09 Front/Rear Rotor and many more.......Brakepads as well.

[helpmeplz]

how much to change all my brake disc in my cbr600 to wave disc?

[ART]

any braking wave rotor for r1???

if have can quote me the price for both fronts n rear...??

[Unique_Motorsports]

how much to change all my brake disc in my cbr600 to wave disc?

 

any braking wave rotor for r1???

if have can quote me the price for both fronts n rear...??

 

You have a PM.

[Unique_Motorsports]

http://www.motovation-accessory.com.sg/images/article/7/2009brakingpromotion.jpg

[edwardthy]

hi towkay, planning to change my rear brake disc soon, pls pm me yr best price

1) Braking rear disc

2) EBC brake pad (rear)

btw any offer for taking e braking rear disc? thanks..

[Unique_Motorsports]

hi towkay, planning to change my rear brake disc soon, pls pm me yr best price

1) Braking rear disc

2) EBC brake pad (rear)

btw any offer for taking e braking rear disc? thanks..

You have a PM.

[edwardthy]

thanks towkay.. wil show up soon.. :shades:

[Unique_Motorsports]

thanks towkay.. wil show up soon.. :shades:

Sure. Thank you for your support.

[sad_how]

any wave rotors for revo with ABS??