SBF X9 Cafe 2009 - Amalfi/Evo

[Ijalsp]

Hi Ijal...hows the leaking like?? Continuous? Or wen top up petrol??

 

I noticed the leaking during top up and also afterwards when bike parked. Can say it's continuous drop by drop but definitely not from the overflow hole.

 

Sent from my GT-N7105 using Tapatalk

[KAMALFEEZA]

Drop by drop stopped after awhile or izit all the way??

[xcellrose]

Hi kamalfeeza ! Did u change both engine mounting n steering cone ? Cause mine handling is really wobbly during turning . In fact I had to change my rear tyre because of uneven thread worn out . The tyre was less than 6 month.......kena con by bike shop cause told me to change new tyre n my bike handling problems is repaired 😡😡😡

[faizal_gaz]

This is due to engine mounting....Wobbly went acceleration...bike also uneven when riding...just get it change cost ard 120-130...for steerin cone...u,when doing a u turn...u feel tt e turnin not smooth abit of jerk means ur need to get ur steering cone change...tt also cost e same price as e engine mounting...cheers!

 

Sent from my GT-P6200 using Tapatalk 2

[kaizersg]

Faizal_gas , what if my bike when i turn e ignition key on , none of the test lights on digidash on , speedometer not on , no signal , no horn when pressed and above all CANT START the bike... anyone else care to share on this matter too... =)

 

♡Spinning Two Wheel♡

[MR BIKER]

My scoot is also happening this way now. cannot start but got lights all when i turn the key. normally 1 use the left brake to start the scoot but nowadays i use the right brake that together press throttle. i suspect the contact. not sure about yours.

[faizal_gaz]

Faizal_gas , what if my bike when i turn e ignition key on , none of the test lights on digidash on , speedometer not on , no signal , no horn when pressed and above all CANT START the bike... anyone else care to share on this matter too... =)

 

♡Spinning Two Wheel♡

 

Bro...u shd check e relay near e front headlight...maybe loose contact or e relay spoil...theres two relay there u can try to switch it...it may wk...

 

Sent from my GT-P6200 using Tapatalk 2

[faizal_gaz]

Mr Biker...i suspect urs is e relay...cos i did face e same prob before...

Sent from my GT-P6200 using Tapatalk 2

[xcellrose]

This is due to engine mounting....Wobbly went acceleration...bike also uneven when riding...just get it change cost ard 120-130...for steerin cone...u,when doing a u turn...u feel tt e turnin not smooth abit of jerk means ur need to get ur steering cone change...tt also cost e same price as e engine mounting...cheers!

 

Sent from my GT-P6200 using Tapatalk 2

 

Thanks for the advice bro .....will get my steering cone n engine mounting changed . Hope the wobbly feel will stop

[MR BIKER]

Mr Biker...i suspect urs is e relay...cos i did face e same prob before...

Sent from my GT-P6200 using Tapatalk 2

Zal, thanks. You are right. After five x9, i am still learning many of the problems creeping. One or two are consistent like the constant steering cone weakness., engine mounting and constant belt changes

[faizal_gaz]

Zal, thanks. You are right. After five x9, i am still learning many of the problems creeping. One or two are consistent like the constant steering cone weakness., engine mounting and constant belt changes

 

No worries bro....cos i did change all e parts in my x9 before...basically everything...

 

Sent from my GT-P6200 using Tapatalk 2

[faizal_gaz]

Thanks for the advice bro .....will get my steering cone n engine mounting changed . Hope the wobbly feel will stop

 

It will definetely stops from wobbling...gurantee...chop...

 

Sent from my GT-P6200 using Tapatalk 2

[osmanpauzan]

alo x9'ers

sharing je

my x9 belt putus last wks along SLE... lucky enough it was arnd 2pm n not bz during the time...

after changing the roller to 12.5gms as advised by the lady frm SunRise wkshop...

can really feel the pick-up PoWer...

btw

any of u guys experienced w faulty digital meter?

was told by a mechanic, this meter is like the CPU of the bike!! how true is it?

[faizal_gaz]

alo x9'ers

sharing je

my x9 belt putus last wks along SLE... lucky enough it was arnd 2pm n not bz during the time...

after changing the roller to 12.5gms as advised by the lady frm SunRise wkshop...

can really feel the pick-up PoWer...

btw

any of u guys experienced w faulty digital meter?

was told by a mechanic, this meter is like the CPU of the bike!! how true is it?

 

Not really true...its e cdi tt matters...faulty meter doesnt mean tt e bike wont run....e bike will be mobile...just make sure e wires dont get short circuited to e analog meter...if not all lights n signals will go haywire..,

 

For roller i suggest u shd try dr pulley sliding roller at 13g...better at pickup n top end...slightly ex then e oem rollers...but worth it...

 

Sent from my GT-P6200 using Tapatalk 2

[osmanpauzan]

bro

10q fyi

[KAMALFEEZA]

wa...rily lots of x9 masters here...cant juz any1 organise mitups/trips.....

[faizal_gaz]

Not master...this just sharing what i went thru with my x9...

 

Sent from my GT-P6200 using Tapatalk 2

[kennyseaw]

My scoot is also happening this way now. cannot start but got lights all when i turn the key. normally 1 use the left brake to start the scoot but nowadays i use the right brake that together press throttle. i suspect the contact. not sure about yours.

 

Hi Bro,

Your left brake switch need to be replace.

[kennyseaw]

alo x9'ers

sharing je

my x9 belt putus last wks along SLE... lucky enough it was arnd 2pm n not bz during the time...

after changing the roller to 12.5gms as advised by the lady frm SunRise wkshop...

can really feel the pick-up PoWer...

btw

any of u guys experienced w faulty digital meter?

was told by a mechanic, this meter is like the CPU of the bike!! how true is it?

 

Digital meter is like a panel to show you all information about the bike. It also run the Signal, brake light, etc... If it doesn't run, you may not be able to get correct information.

[kennyseaw]

I noticed the leaking during top up and also afterwards when bike parked. Can say it's continuous drop by drop but definitely not from the overflow hole.

 

Sent from my GT-N7105 using Tapatalk

 

Is the fuel floating rubber seal give way, you can try to take it out and fill with some water pipe white tap, it may be able to help. Btw, try not to top up too full, if you have been doing it, even a brand new fuel floater doesn't last long for you.

[MR BIKER]

Thanks Kenny. welcome back . yours solution is most probably correct. iunfortunately I could not go to FS to do the repair. The other shop also thought its the relay. but after changing it on monday, yesterday the same irritation happened again because i seldom ride my x9.

[osmanpauzan]

aloaloalo x9'ers

guys, advise pls..

since ther are no more aftermarket exhaust available for X9.. I'm thinking to project my spare stock exhaust by removing any stopper in it..

anyone of u guys ever did this b4??

and

any difference with the performance if I use an open port filter ?

terima kaseh:bounce:

[kennyseaw]

Thanks Kenny. welcome back . yours solution is most probably correct. iunfortunately I could not go to FS to do the repair. The other shop also thought its the relay. but after changing it on monday, yesterday the same irritation happened again because i seldom ride my x9.

 

remember to get it change ASAP, normally when 1 give way, the other will soon be down too, ride safe, cheers.

[kennyseaw]

aloaloalo x9'ers

guys, advise pls..

since ther are no more aftermarket exhaust available for X9.. I'm thinking to project my spare stock exhaust by removing any stopper in it..

anyone of u guys ever did this b4??

and

any difference with the performance if I use an open port filter ?

terima kaseh:bounce:

 

Pls do not try to take mod. the original exhaust, you cant get any power at all but to get high fuel consumption and noise... I think there's still after market exhaust around.

[TSH]

Anyone want to let go pair of x9 Black mirror? With or without signal light also can. Can also what's app me 97679343 if have.