[Group] SBF Yamaha X-1r 135

[blackflys]

k bro and sis.... i got offer for x1-r..... since economy downturn.... money difficult to earn.... want to know more pm me....

[HaiR1]

i wan i wan.....

i wan give comment.....

 

from wat u post....

my mind auto noe this 2 bike shop....

no need think de.... my mind jus reg the shop name liao... hehe...

 

tighter?

i think he got tighten the stearing cone...

how much he charge u a bearing???

not a pair ar... jus a bearing.... $15?? if above $15... he jus triming ur carrot hair....

bending of fork back $60????

i would say is jus right about there...... plus minus....

 

the auto pilot thing hor....

yes correct.... is either the bearing or front left hand fork bend in abit that cause the auto pilot left....

solution????

jus ask the mech to take the fork out and put on a flat floor to check can liao lor....

if jus to check got spoil anot and he charge $$$$

get the fuk out of the shop.... (they found out that the carrot hair trim not nice... gonna get it botak....)

 

about bearing gone case....

if they change a new 1...

they of course got to show u ur old bearing...

if got show.... how the bearing look like spoil???

some of the small ball ball go lost liao

or the bearing not that tight fit anymore.....

as not that tight fit... the bearing still can use... it a tell tale sign of wear and tear...

but it wont cause that much as in auto pilot.....

 

 

and bro....

hope u are alright....

and ur bike

 

 

 

- He did not tightened my teering-cone.. juz shake by using the front fork..

- Well-bearing comfirm gone case..I can even feel the wheel "Dancing" when shake it.. Worst still,when cornering,the bike front part not stabel.. Clearly i saw the wheel-bearing cialat liao,the housing went loose and some of the "ball" even vapourised i guess... cost of new wheel-bearing + worksmanship $28

 

- Bike handling feel better

 

 

 

thankss for e concern mate....

 

 

 

anymore comments...?

[mild_slevin]

morning ryders!

 

thanks for sharing haiR1! U***** is it euqinU? LOL

the balls in the bearing vaporized, that's serious case man.

[HaiR1]

morning ryders!

 

thanks for sharing haiR1! U***** is it euqinU? LOL

the balls in the bearing vaporized, that's serious case man.

 

 

 

 

 

GoodMorning......!

 

wheel-bearing is not in uniform from wat i can see... Some smaller ball,some normal size ball,some ball i oso dunno go where....

[mild_slevin]

 

Thx bro, appreciate ur offer!

 

met up with ken earlier, fwa, i really veli noob lei, alignment out le still dung noe. he ride oni immediately noe riaoz! tml go fix liao no more problems!

 

anyone noe BBDC area nearest where got bike shop? pls pm me the street name, tml gotta fix it b4 my lessons there.

 

Seems like u solved the problem, what alignment is it about huh???

You not using stock rim and tyre too rite?

 

Wow you now taking CLS2 le mah?

[mild_slevin]

 

 

GoodMorning......!

 

wheel-bearing is not in uniform from wat i can see... Some smaller ball,some normal size ball,some ball i oso dunno go where....

 

Morning too !!!

 

then is your front fork OK? is it like wat W*** Y** said?

a noob like me... I feel like a "victim" or "carrot" when comes to such issue... but u did something rite, check with other mechs and analyze the solution they offer.

[HaiR1]

Morning too !!!

 

then is your front fork OK? is it like wat W*** Y** said?

a noob like me... I feel like a "victim" or "carrot" when comes to such issue... but u did something rite, check with other mechs and analyze the solution they offer.

 

yuuppp....

 

 

will stick to U***** from now....

he suggestion can say effective liao

[JackOHJack]

and that ***G **P

got a beri beri gd chef...

they cook carrot cake best in Sg and somesay batam

 

 

comments needed...

 

My prob:

Recently got crash with my Spark135.. The front absorber was kinda shaky... Thus,i decided to ask some mechanic to look into the matter...Handle-bar auto-pilot-to-the-left if let go the handle bar..

 

 

 

Location site: W*** Y**

Told mechanic my story of what happended... Let him test ride my bike..Then he say... "Your wheel-bearing,fork-oil,need to replace new set of the front absorber(the-twin-metal-thingy) & oso check alignment...

Was quoted for $230 for the repair(including worksmanship)..

When i ask for 1st-hand fully-stock Spark135 front-absorber, was quoted $280

 

proceeded to U***** Motor after further thinking

 

Location site: U***** Motor

After doing my monthly servicing,went to ask a mechanic(Kelvin if im not wrong) about my prob.. He told that my wheel-bearing was "gone-case".. But then my cone-bearing still ok.. So i replace the wheel-bearing..

What he suggested was "U change your wheel-bearing 1st lh..See how..If still no effect,then go for pressing @ $60...

 

 

 

 

 

 

 

In my opinion:

- U***** is like helping & assisting in a way that is best for me..

- W*** Y** is kinda ex.. Dunno if i kenna chop..

 

 

 

 

Current bike condition:

- Feel tighter(like new front) with new set of wheel-bearing

- gonna still observe the situation

 

 

 

Summary:

- Anyone wants to comment?

- Pricing?

 

Bro, hope u r alrite man. 1 by 1 change lor, cheapest ald. meanwhile ride slower and observe! coz dunno when something else might give way, if u noe wat i mean.

 

 

 

GoodMorning......!

 

wheel-bearing is not in uniform from wat i can see... Some smaller ball,some normal size ball,some ball i oso dunno go where....

 

the wheel kenna frightened, ball shrink arh!

 

Seems like u solved the problem, what alignment is it about huh???

You not using stock rim and tyre too rite?

 

Wow you now taking CLS2 le mah?

 

2A la, i love em super4! bumpy course! whoo, nice!

 

i go and bia throttle in gear 2 and 3, until can hear the vtec (or whatever it was), fwa! power!

 

not stock.

 

kinda solved.. coz it felt a lot better. but when i aim my handlebar and tire (not mudguard), it's still obviously not aligned.. ppl ald free service liao, so i never go and make a big hooha also, and i gotta go for lesson le...

 

Now still can tahan, wait til i get to my new found zhai shop near my place ask them help me align all the way ba.

 

k3n: if i sit on main stand and use the method u taught me, swing the handlebar never hit left leg (left abt 1 inch of air), while it hit right leg (dig abt 0.5inch into my right leg) - means still not aligned right? :faint:

[cubking]

super 4 got vtec one meh?

[Theyiqin]

super 4 got vtec one meh?

 

got..........

[cubking]

hahaha.. i is noob..

[Theyiqin]

wad a boring day ..........................................

[evoscythe]

wad a boring day ..........................................

 

Agree. I now no moneyyyyy. Siannnnnn.

[mild_slevin]

yuuppp....

 

 

will stick to U***** from now....

he suggestion can say effective liao

 

LOL then perhaps I should patronise them one of the days!

 

 

2A la, i love em super4! bumpy course! whoo, nice!

 

i go and bia throttle in gear 2 and 3, until can hear the vtec (or whatever it was), fwa! power!

 

not stock.

 

kinda solved.. coz it felt a lot better. but when i aim my handlebar and tire (not mudguard), it's still obviously not aligned.. ppl ald free service liao, so i never go and make a big hooha also, and i gotta go for lesson le...

 

Now still can tahan, wait til i get to my new found zhai shop near my place ask them help me align all the way ba.

 

k3n: if i sit on main stand and use the method u taught me, swing the handlebar never hit left leg (left abt 1 inch of air), while it hit right leg (dig abt 0.5inch into my right leg) - means still not aligned right? :faint:

 

Yup that's why I enjoy my CLS2A lesson time to time shiok man!

There's once they want us to use 1st gear to maneuver wah very difficult!

Heng ah CB400 not hydraulic clutch ar bo the wrist gonna swell.

 

are you saying the rear tyre not align to the front? Ex. the rear more to the right of the front tyre?

[milktm]

boring evening!! tiring too!!

[k3ndokaz3]

yoohooo.....

[HaiR1]

is the new or old gpr pipe better...?

 

comments?

[JackOHJack]

Yup that's why I enjoy my CLS2A lesson time to time shiok man!

There's once they want us to use 1st gear to maneuver wah very difficult!

Heng ah CB400 not hydraulic clutch ar bo the wrist gonna swell.

 

are you saying the rear tyre not align to the front? Ex. the rear more to the right of the front tyre?

 

The handlebar not aligned to the front tire. so hen my arms going straight, my tires going left. in order to go straight, i gotta "tune" my arms maciam sideways

 

alignment solved liaoz - the mech is 10x more upz! glad north area not all are orh diam. ar boh everytime gotta run here run there

 

evening guys! ride safe, have fun!

 

k3n: next time treat u to a meal, thx for pointing out the blardee obvious fact that i missed entirely!

[k3ndokaz3]

so ur bike every thing went well????

no more wierd feeling???

[k3ndokaz3]

do PM me ur msn....

[milktm]

wad bout me! no treat me lol!!

[milktm]

ken heard got ppl treat wan take ppl msn liao!!

[k3ndokaz3]

shh......

dun so fast expose me ma.....

[Theyiqin]

wad is the itrade below our nick for?

[k3ndokaz3]

dunno leh....

maybe is point 4 garage sales....