[Group] SBF Yamaha X-1r 135

[PeRiLoUs]

wah. safety issue

[milktm]

haha there's once my outfit were entire black so i choose to put on a metalic silver helmet. Hehe if not I'll put on my rain coat, there's strip behind which illuminate when light shine on them.

 

yah brake pad can't play play, important investment... guess will check them out april... or even change them... so sianz now pocket one big hole sia

 

brake pad is quite exp if u wanna get gd one. haha.. for my i onli change SSBH and i felt its enff already. l0l.

 

wah. safety issue

 

we not lacer like u mah! we r safety lider.

[Deltaboi]

mild_slevin,

commissioning of safety enhancement plan

SSBH, Brake Disc, Tyres, Hazard warning light, Air horn

 

there's still more of it. brighter headlight and taillight, wear bright clothes, better brake levers and brake pad.

 

with regards to braking...

 

ppl please make sure ur four nuts have been properly tightened on the caliper and the bracket...

 

if shop install try to ask dem not to use de gun to screw it in...too tight would cause the bracket to break...

now i am left front-brakeless...haha!!

[milktm]

with regards to braking...

 

ppl please make sure ur four nuts have been properly tightened on the caliper and the bracket...

 

if shop install try to ask dem not to use de gun to screw it in...too tight would cause the bracket to break...

now i am left front-brakeless...haha!!

 

i never see any shop using gun to screw. the place which did for u must be super lazy. u never went to change the brake?

[mild_slevin]

Hi Guys,

 

Just wanna share with you some information about wave shaped brake disc

 

http://www.motorcyclistonline.com/howto/122_0511_wave_motorcycle_brakes/index.html

 

these type of disc would be optimise on racetrack!

[mild_slevin]

wah. safety issue

 

lol "live today, ryde tomorrow"

I still got that passion to ryde, I still want to continue doing so... always safety comes first

[mild_slevin]

brake pad is quite exp if u wanna get gd one. haha.. for my i onli change SSBH and i felt its enff already. l0l.

 

 

Yeah, that's why I gonna implement bit by bit...

nowadays recession just drive me nuts, retrenchment like everyday "words" just don't know when you'll be call upon and say : "Thanks for your contribution for the past one year, I sad to say that your service is no longer needed" *low morale

[mild_slevin]

i never see any shop using gun to screw. the place which did for u must be super lazy. u never went to change the brake?

 

hey you got a side-stand while you have racing footrest? Where you get it done?

You don't have problem engaging the side stand mah?

[milktm]

hey you got a side-stand while you have racing footrest? Where you get it done?

You don't have problem engaging the side stand mah?

 

my side stand is take from spark side stand. i get it done at my bike shop. no prob engaging at all.

 

btw, u can multi-quote many post at 1 time so u doesnt need to post so many times. later u kena ban by admin ah...

[mild_slevin]

my side stand is take from spark side stand. i get it done at my bike shop. no prob engaging at all.

 

btw, u can multi-quote many post at 1 time so u doesnt need to post so many times. later u kena ban by admin ah...

 

lol looks messy?

 

tat's cool, at times side stand would be better than main...

[Deltaboi]

i never see any shop using gun to screw. the place which did for u must be super lazy. u never went to change the brake?

 

haha true that!

 

change the brake not yet ... no time also...haiz!

[mild_slevin]

haha true that!

 

change the brake not yet ... no time also...haiz!

 

hmmm u encounter quite a number of problem wor...

 

overhaul, then now brake issue...

[milktm]

coz his lacer mah! then mod this n tat. haha

[mild_slevin]

coz his lacer mah! then mod this n tat. haha

 

lol... another day has past...

you remove all the decal yourself?

[milktm]

lol... another day has past...

you remove all the decal yourself?

 

yea. take my time slowly take it off. haha. anyway was bored so might as well do something to my wifey.

[Chicken Hung Heng]

hey milktm, ur helmet nice ar.. cool

[Deltaboi]

hmmm u encounter quite a number of problem wor...

 

overhaul, then now brake issue...

 

yah lor...one by one all come

piss me off coz its a new bike...

 

was hoping all would come few years down the road but never expected less den a year all come...

 

coz his lacer mah! then mod this n tat. haha

 

actually i never mod anything ba...especially engine side...

brakes only change brake pad...never do anything yet

 

wonder will it get worse when is start my mods...hmm...

hope not...

 

[evoscythe]

Hi Guys,

 

Just wanna share with you some information about wave shaped brake disc

 

http://www.motorcyclistonline.com/howto/122_0511_wave_motorcycle_brakes/index.html

 

these type of disc would be optimise on racetrack!

 

Does it mean that the flower disc brakes got no effect on our babies as well? Shxt i thought of going Malaysia to get them after i get my pay.

 

So many things to do, so little monehhhh. ):

[Theyiqin]

guy nw i very jialat i change my rim ytd at a well known motorshop u all also got went there de ......not good to say out the name ..... ytd went to change rim...starting the mech take out the rim den take out the shaft or wad need to use hammer and hit, he hit the oppsite side of the endcan which is from the left side to the right side den when he hit i think the shaft hit the endcan but i didn't notice until the mech call me and tell me that my pipe dented after i see den i ask why like that he say previously my bike the shaft too near the pipe den riding that time i make until the endcan .... den i say ok and went to look at the dent hw deep is it.... after that he keep take in and out the shaft by hitting it the same place ...and i saw the shaft keep hitting the endcan liao i though won't dent coz he tell me is when riding den the pipe too near the shaft then will dent de after i ride it back the rim got problem ,infront the rim like spoil like keep control me to the left and the back rim got those squeeky noise.....

went back to the shop tell the mech and mech ride my bike tell me no problem

i blur lo.... because i lend my fren ride he also say so.... den went back to wash my bike den i see the dented again .... is more jialat den previiously i saw de and i see the shaft ... but the shaft is very far from the endcan ... after that den i know is he knock that time hit my endcan de ... cb lo dam dulan...

 

previously ride sp also overhaul at there cost me few hundred bucks ride haven 2 week the bike got problem liao oil shield spoiled hais still don know wan to go down the shop next time anot....

 

tml go down fix my rim den think don wanna go back anymore......

[Jasper514]

yah lor...one by one all come

piss me off coz its a new bike...

 

was hoping all would come few years down the road but never expected less den a year all come...

 

 

 

actually i never mod anything ba...especially engine side...

brakes only change brake pad...never do anything yet

 

wonder will it get worse when is start my mods...hmm...

hope not...

 

 

you racer what!!! faster than v.rossi. hahaha!

guy nw i very jialat i change my rim ytd at a well known motorshop u all also got went there de ......not good to say out the name ..... ytd went to change rim...starting the mech take out the rim den take out the shaft or wad need to use hammer and hit, he hit the oppsite side of the endcan which is from the left side to the right side den when he hit i think the shaft hit the endcan but i didn't notice until the mech call me and tell me that my pipe dented after i see den i ask why like that he say previously my bike the shaft too near the pipe den riding that time i make until the endcan .... den i say ok and went to look at the dent hw deep is it.... after that he keep take in and out the shaft by hitting it the same place ...and i saw the shaft keep hitting the endcan liao i though won't dent coz he tell me is when riding den the pipe too near the shaft then will dent de after i ride it back the rim got problem ,infront the rim like spoil like keep control me to the left and the back rim got those squeeky noise.....

went back to the shop tell the mech and mech ride my bike tell me no problem

i blur lo.... because i lend my fren ride he also say so.... den went back to wash my bike den i see the dented again .... is more jialat den previiously i saw de and i see the shaft ... but the shaft is very far from the endcan ... after that den i know is he knock that time hit my endcan de ... cb lo dam dulan...

 

previously ride sp also overhaul at there cost me few hundred bucks ride haven 2 week the bike got problem liao oil shield spoiled hais still don know wan to go down the shop next time anot....

 

tml go down fix my rim den think don wanna go back anymore......

 

so jialat?? any hints on the shop??? disapointing sia.

 

i'm back in sg! miss my bike

[PeRiLoUs]

wahh!.. lotsa probs here!

 

 

yea..any clues abt the shop?

[Deltaboi]

you racer what!!! faster than v.rossi. hahaha!

 

 

so jialat?? any hints on the shop??? disapointing sia.

 

i'm back in sg! miss my bike

 

u come in shop ur bike so much louder den mine and u still call me racer...

u r asking for it u noe handsome...haha...how was ur trip overseas?

[Deltaboi]

guy nw i very jialat i change my rim ytd at a well known motorshop u all also got went there de ......not good to say out the name ..... ytd went to change rim...starting the mech take out the rim den take out the shaft or wad need to use hammer and hit, he hit the oppsite side of the endcan which is from the left side to the right side den when he hit i think the shaft hit the endcan but i didn't notice until the mech call me and tell me that my pipe dented after i see den i ask why like that he say previously my bike the shaft too near the pipe den riding that time i make until the endcan .... den i say ok and went to look at the dent hw deep is it.... after that he keep take in and out the shaft by hitting it the same place ...and i saw the shaft keep hitting the endcan liao i though won't dent coz he tell me is when riding den the pipe too near the shaft then will dent de after i ride it back the rim got problem ,infront the rim like spoil like keep control me to the left and the back rim got those squeeky noise.....

went back to the shop tell the mech and mech ride my bike tell me no problem

i blur lo.... because i lend my fren ride he also say so.... den went back to wash my bike den i see the dented again .... is more jialat den previiously i saw de and i see the shaft ... but the shaft is very far from the endcan ... after that den i know is he knock that time hit my endcan de ... cb lo dam dulan...

 

previously ride sp also overhaul at there cost me few hundred bucks ride haven 2 week the bike got problem liao oil shield spoiled hais still don know wan to go down the shop next time anot....

 

tml go down fix my rim den think don wanna go back anymore......

 

dude...honestly when u ride ur bike b4 changing the rim, did u feel a knock at ur right footrest whenever u kanna any hump all dis...

 

coz my exhaust behind also 'phua kang'...coz of this...if dun have den that tan ah kao make spoil de...

please make mention of the shop name to prevent similar kind of mishaps happening to others...

 

but since its the back of the exhaust, i noe it heart pain but mostly cant see one ba...so just leave it and dun tell people den people also donno,like what i am doing...

sh*t...now everybody no le!

 

[mild_slevin]

yah lor...one by one all come

piss me off coz its a new bike...

 

was hoping all would come few years down the road but never expected less den a year all come...

 

 

no worries, should be fine this time round...

[mild_slevin]

Does it mean that the flower disc brakes got no effect on our babies as well? Shxt i thought of going Malaysia to get them after i get my pay.

 

So many things to do, so little monehhhh. ):

 

lol i believe we can feel a little difference, just that manufacturer suggest best use on track.

 

Lurve the technology involve, better heat dissipation, drive brake dust away... but heavy lol (*can't have the best of both world)