[Group] SBF Yamaha X1

[evaakutenshi]

Morning guys! all so early ar... yawn~

 

hmmm... let me see wat i can add... erm... change to longer suspension, fairing, change rear brake to disc, change speedo to koso, change handlebar become longer (which is ugly)... hmmm dunno wat can u still do wif the small bike... haha... anyway... watever u do just dun spoil it... like me... =x

 

where gt early.sch starts at 7.15am marh.ehk.u go chg 2 koso speedo den gt take out when u sell or nt?n hw come u chg2 until spoil the bike?

[Charlton]

where gt early.sch starts at 7.15am marh.ehk.u go chg 2 koso speedo den gt take out when u sell or nt?n hw come u chg2 until spoil the bike?

 

haha... i nv change... i saw other ppl change... dunno how they fit the meter into the casing... haha... hmmm... suspension is one of the change that spoil my swingarm... bike got jack up and cause the chain to keep rub again the swingarm... den like this spoil lo... damn...

[mezan]

Quite a number of things can be change uh.

Change X1 fairings to what fairings? KR? haha. kidding.

 

Was wondering, where to find affordable quality gantung (suspension) for X1? Need to replace mine. Anyone got lobang? Care to share.

Edited May 7, 2010 by mezan

[Lim Ah Wan]

when ur riding and after ur engine's hot..it shuts down?and when it cools off...it can start normally?

 

Same Case As Mine Few Months Back. After Riding For Like 30mins, The Engine Will Just Die Right? Then After Around 20mins Then Can Start Back Normally But Within That 20mins Cannot Start At All Right?

 

Its Actually The Pulsar Which Is Connected To The Magnetic Coil. Just Change The Pulsar Or Both Then Everything Shud Be Fine.

[khehBRYAN]

Quite a number of things can be change uh.

Change X1 fairings to what fairings? KR? haha. kidding.

 

Was wondering, where to find affordable quality gantung (suspension) for X1? Need to replace mine. Anyone got lobang? Care to share.

 

bro, if you dont mind can try my suspension. i selling second hand. the tension quite tight, meant for racing de, but its slightly adjustable so can loosen abit. if you're interested can pm me i let you know more details (:

[khehBRYAN]

guys, anybody change their clutch plates here before? how often change once ah? roughly how much?

[Bensim]

guys, anybody change their clutch plates here before? how often change once ah? roughly how much?

 

I think is $40 or $50 if i remember correctly. Once u feel the clutch slip,then it time to change.

[evaakutenshi]

haha... i nv change... i saw other ppl change... dunno how they fit the meter into the casing... haha... hmmm... suspension is one of the change that spoil my swingarm... bike got jack up and cause the chain to keep rub again the swingarm... den like this spoil lo... damn...

 

lucky u.i jus chged my swingarm bush dat day.whole thing make my bike wobble like siao.rear tyre can move right n left.hahahaha.

 

alan arh.u rly rite lei.my bike like no more power liao!

 

 

GD MORNING ALL!MONDAY PINK!

[Guest B_E_N]

its monday again.. YAWN

 

GOOD MORNING JIE JIE AND ALL

 

i change clutch plate b4, but i change in JB... 135RM

[mezan]

Harlo X1-rians!!!

 

Anyone had problems when full throtteling or travelling @ 90 - 100+km/h will have problems (will try my best to describe);

 

As in the bike will jerk as if u had pull the clutch. It happen continuosly for a few distance and random too.

 

I find it quite irritating. Is this normal or what?

[Guest B_E_N]

Harlo X1-rians!!!

 

Anyone had problems when full throtteling or travelling @ 90 - 100+km/h will have problems (will try my best to describe);

 

As in the bike will jerk as if u had pull the clutch. It happen continuosly for a few distance and random too.

 

I find it quite irritating. Is this normal or what?

 

pull the clutch will jerk meh?

or u mean the rev very high and no power? if thats the case den is clutch plate worn out

if steering jerk den is steering cone spoilt.

if wheel will wobble den is rim bearing spoilt

[Charlton]

haiz... just came back... tired... not cos of work... but traffic jam... phantom not easy to squeeze sial... i miss my x1... T,T

[Guest B_E_N]

haiz... just came back... tired... not cos of work... but traffic jam... phantom not easy to squeeze sial... i miss my x1... T,T

 

haha.. i am squeezing with my phantom everyday... hahah.. somemore i got wider handle bar and saddle bag

[taneric]

Hi pple,

 

I jus got my Spark 135. Happen to c the signature of bro "oOQiangOo" (d 2 white bike which i thk 1 of which is a Spark). I quite like the concept of full white with some decals. Can anyone tell me where I can get the cover set for my bike in full white?

 

Sorry, I do not know how to attach pic

[mezan]

pull the clutch will jerk meh?

or u mean the rev very high and no power? if thats the case den is clutch plate worn out

if steering jerk den is steering cone spoilt.

if wheel will wobble den is rim bearing spoilt

 

Yes, the rev very high and no power. But it will jerk abit when i regain power, i guess bcoz of the engine brake (eg. down to gear 2 from 3).

 

How much is the clutch plate and where could i get it with installation?

[khehBRYAN]

I think is $40 or $50 if i remember correctly. Once u feel the clutch slip,then it time to change.

 

wah $40 per plate means total $160 ah? that is expensive man! i duno wanna change anot leh, i kick gear 2 sometimes it'll drop to neutral when i rev halfway. but other gears still quite okay.

[Bensim]

wah $40 per plate means total $160 ah? that is expensive man! i duno wanna change anot leh, i kick gear 2 sometimes it'll drop to neutral when i rev halfway. but other gears still quite okay.

 

I mean it come in a SET!. not per plate $40.

[evaakutenshi]

haiz... just came back... tired... not cos of work... but traffic jam... phantom not easy to squeeze sial... i miss my x1... T,T

 

hahahahahahaha.stay bhind vehicles lah.safer marh

 

Hi pple,

 

I jus got my Spark 135. Happen to c the signature of bro "oOQiangOo" (d 2 white bike which i thk 1 of which is a Spark). I quite like the concept of full white with some decals. Can anyone tell me where I can get the cover set for my bike in full white?

 

Sorry, I do not know how to attach pic

 

hmm.bplus.wing yap.hmm.or u can try asking sparkans next door

 

GOOD MORNING PEEPS!

[ImEG]

Boredddddd siooooo

[ImEG]

Cool now i'm using iPhone tapatalk app to surf coollll

[khehBRYAN]

I mean it come in a SET!. not per plate $40.

 

oh haha okok.. sry ah i mistook it wrongly. hmm i'll think about it and see how lor.

 

anybody interested in buying rear suspension?

[ImEG]

 

oh haha okok.. sry ah i mistook it wrongly. hmm i'll think about it and see how lor.

 

anybody interested in buying rear suspension?

As usual ahhahaha

[Guest B_E_N]

Yes, the rev very high and no power. But it will jerk abit when i regain power, i guess bcoz of the engine brake (eg. down to gear 2 from 3).

How much is the clutch plate and where could i get it with installation?

 

wat do u mean by that? coz of engine brake?

mayb u jus bring to bike shop and ask them check..

where to do, i will go jb..

[ImEG]

 

wat do u mean by that? coz of engine brake?

mayb u jus bring to bike shop and ask them check..

where to do, i will go jb..

Jb jb jb jb jb jb always jb soon you will get sick of it

[mezan]

wat do u mean by that? coz of engine brake?

mayb u jus bring to bike shop and ask them check..

where to do, i will go jb..

 

I'm not quite sure how to explain it. It's like when u throtteling, den u clutch in and throw the clutch (release quickly).

 

I will send bike for service soon.

 

Anw, was curious, what's the top speed of X1? Also, does weight of the rider plays a part?