[Group] SBF Yamaha X1

[LTC]

Will upgrade later be troublesome and difficult or is it something tobadd on? And do I need to clean my chain before installing?

 

Dun clean ur chain prior to installation. Then after installation u'll see how effective it is...

[LTC]

Hi fisherprice.. the DIY date for the heat wrap will be on the 24th July Sun Morning.. however, if I have 5 names for the ezzyoiler (so far inc urself is 3), we can also do it on the 24th July.

 

Mr Koh will be around to guide us but please note he is not suppose to get his hands dirty. The kit is supplied with the single tip. Im not sure about the upgrade. What sort of upgrade are you referring to? Can you pm me your number so that I can keep you in the loop with regards to these upgrades.

 

Please help me to spread the words ard. I just need 2 more names to confirmed the Ezzyoiler purchase.

 

I might drop by to KPOH...

[ezzyoiler]

Single tip: Lubricant drips at center of chain.

Twin tips: Lubricant drips to sides of rear sprocket and uses CG to push the lubricant to the chain. More effective in terms of getting into the links of the chain.

 

Mr Koh, pls correct me if I made any wrong statement.

 

correct..except..the single tip..

the latest design also oils the sprocket..but on one side only..

[sujak]

so great to see so many ppl flocking into the X-1 forum.. it was dead for a moment.. lets hope this is a new start..

 

anyway mr Koh, can we confirm on the 24th July Sun at 9am DIY for the exhaust heat wrap? As for the ezzyoiler, we will just have to wait for 2 more person to fill up the quota.. once quota hit, we will try to do it also on the 24th July if possible.. can?

 

Anyway guys, Ive already researched on the exhaust heat wrap.. it is best to spray a coat of hi-temp spray before wrapping. Also, since we are dealing with fibre glass, a silicon glove is necessary unless you want to experience the fibre splinters going into your skin. You will also need 2 hose clips to secure the heat wrap. On top of that we will need a pail of water to soak the heat wrap before wrapping around our headers. Hopefully Mr Koh can help to provide us a pail of water.. hehehe.. if not then I will sacrifice my top box as a pail ...

[LTC]

so great to see so many ppl flocking into the X-1 forum.. it was dead for a moment.. lets hope this is a new start..

 

anyway mr Koh, can we confirm on the 24th July Sun at 9am DIY for the exhaust heat wrap? As for the ezzyoiler, we will just have to wait for 2 more person to fill up the quota.. once quota hit, we will try to do it also on the 24th July if possible.. can?

 

Anyway guys, Ive already researched on the exhaust heat wrap.. it is best to spray a coat of hi-temp spray before wrapping. Also, since we are dealing with fibre glass, a silicon glove is necessary unless you want to experience the fibre splinters going into your skin. You will also need 2 hose clips to secure the heat wrap. On top of that we will need a pail of water to soak the heat wrap before wrapping around our headers. Hopefully Mr Koh can help to provide us a pail of water.. hehehe.. if not then I will sacrifice my top box as a pail ...

 

There's a swimming pool there... LOL...

[fabianau]

since need to spray high temp spray first. i gg msia to decarbonized my pipe first lo. they will help me respray the header also. 24th 9am ok lo.

[sujak]

There's a swimming pool there... LOL...

 

swimming pool? maybe after DIY can swim together2.. hahaa

[sujak]

since need to spray high temp spray first. i gg msia to decarbonized my pipe first lo. they will help me respray the header also. 24th 9am ok lo.

 

I doubt they use hi temp spray.. bring your own hi-temp spray to be safe.. if not its just a wasted trip.. Im not going to spray my header at all actually..

[LTC]

swimming pool? maybe after DIY can swim together2.. hahaa

 

I dun think I want to swim in it after u put in the heat wraps...

[sujak]

I dun think I want to swim in it after u put in the heat wraps...

 

haha.. ok swimming out of the qn.. hv u gotten urself the ezzyoiler?

[LTC]

haha.. ok swimming out of the qn.. hv u gotten urself the ezzyoiler?

 

Yes... Installed 1st Gen. I already responded to ur post in the X1-R thread.

[FisherPrice]

Hey guys I found another friend interested in the ezzyoiler diy kit. He riding KR150. just put my name x2. btw my number 94522415.

[ezzyoiler]

so great to see so many ppl flocking into the X-1 forum.. it was dead for a moment.. lets hope this is a new start..

 

anyway mr Koh, can we confirm on the 24th July Sun at 9am DIY for the exhaust heat wrap? As for the ezzyoiler, we will just have to wait for 2 more person to fill up the quota.. once quota hit, we will try to do it also on the 24th July if possible.. can?

 

Anyway guys, Ive already researched on the exhaust heat wrap.. it is best to spray a coat of hi-temp spray before wrapping. Also, since we are dealing with fibre glass, a silicon glove is necessary unless you want to experience the fibre splinters going into your skin. You will also need 2 hose clips to secure the heat wrap. On top of that we will need a pail of water to soak the heat wrap before wrapping around our headers. Hopefully Mr Koh can help to provide us a pail of water.. hehehe.. if not then I will sacrifice my top box as a pail ...

 

it look like the minimum 5 for the diy has been met..

okay confirmed 24 july 9am..

for the diy for ezzyoiler and the heat wrap...

 

for those doing heat wrap ...pleases check your header exhaust pipe diameter..before you get the hose clamps..get the hose clamps at least a 1/4 inches larger than the pipe.

bring along a screw drivers ..

for the oiler please bring along a sturdy pair of pliers and a pair of scissors..

 

thank you SUJAK..you are a great communicator and managed to organise the diy in such a short time..

[ezzyoiler]

please take note that the diy will be done at:

THE BAYSHORE CONDO..AT BAYSHORE ROAD..

along the ECP TOWARDS the airport exit at the BAYSHORE exit..no.6 after the bedok exit.

 

..

 

to gain acess to the condo..just inform the security guard that you are visiting mr. koh of tower 2b..04-01.

 

we meet at the carpark immediately after TOWER 3.. inside the condo .

turn left after you clear security..you will pass tower 1b and 1a..once you reach the boundary wall look out for a sgn to tower 3..and ride to the rear..where tower3 is.

[sujak]

Group Purchase of Ezzyyoiler DIY Kit @ $20

e.g. NICK / Hp Number / Qty

 

1) Sujak / 93857512 / 1

2) Fabianau / ?? / 1

3) FisherPrice / ?? / 1

4) FisherPrice Friend

5)

 

 

Group Purchase of Exhaust Heat Wrap $7/m

N.B. According to Mr Koh, 2m is enough for our exhaust headers.

 

e.g. NICK / Hp Number / Length / $

 

1) Sujak / 93857512 / 2m / $14

2) Fabianau / ?? / 2m / $14

3)

4)

5)

 

Mr Koh, I will need one more name to fill up the DIY quota.. lets up we can get another rider till 24th July..

[fabianau]

1 more person for the ezzyoiler and 3 more for the wrap. btw, our exhuast header need until 2m meh? i see like not so long leh..

[LTC]

please take note that the diy will be done at:

THE BAYSHORE CONDO..AT BAYSHORE ROAD..

along the ECP TOWARDS the airport exit at the BAYSHORE exit..no.6 after the bedok exit.

 

..

 

to gain acess to the condo..just inform the security guard that you are visiting mr. koh of tower 2b..04-01.

 

we meet at the carpark immediately after TOWER 3.. inside the condo .

turn left after you clear security..you will pass tower 1b and 1a..once you reach the boundary wall look out for a sgn to tower 3..and ride to the rear..where tower3 is.

 

U will see a down slope to underground carpark. Ignore go up slope and head further till u see a tennis court. Park at the bike lots just before/beside the tennis court. That is the place where Mr Koh usually meet the bikers for DIY etc...

[ezzyoiler]

1 more person for the ezzyoiler and 3 more for the wrap. btw, our exhuast header need until 2m meh? i see like not so long leh..

those exhaust pipe..around 1" in dia...u need a ratio of 1:3..

ie 1m pipe need 3m wrap...

just wrap a krr 150 header to the pressure chamber...aka stomach.../the total length is only about 16 " long..it took up 3m for a good wrap..

[sujak]

those exhaust pipe..around 1" in dia...u need a ratio of 1:3..

ie 1m pipe need 3m wrap...

just wrap a krr 150 header to the pressure chamber...aka stomach.../the total length is only about 16 " long..it took up 3m for a good wrap..

 

yupz.. i agree.. we need to overlap the heat wrap... here is a good tutorial on wrapping your heat wrap

[sujak]

Group Purchase of Ezzyoiler Single-Tip Manual DIY Kit @ $20

e.g. NICK / Hp Number / Qty

 

1) Sujak / 93857512 / 2

2) Fabianau / ?? / 1

3) FisherPrice / 94522415 / 2

 

 

 

 

Group Purchase of Exhaust Heat Wrap $7/m

N.B. According to Mr Koh, 2m is enough for our exhaust headers.

 

e.g. NICK / Hp Number / Length / $

 

1) Sujak / 93857512 / 2m / $14

2) Fabianau / ?? / 2m / $14

3) Still waiting for @apish88 reply

4) Still waiting for @RedHare reply

5) Still waiting for @BullDozer confirmation.

 

If you guys cant make it, you can xfer me the money and I will collect from Mr Koh for you.

I'm staying in Pasir Ris and work around Potong Pasir area...

 

Finally quota fulfilled. Thank you Fisherprice and Fabianau for your support. Cant wait for the DIY session @ezzyoiler

[sujak]

Anyway, my friend will be going to Thailand end of the month and Im asking him to look around for some X1 parts. Any of you interested to find anything?

[fabianau]

i quite interested to find some parts to improve my speed... suggestion?

[ezzyoiler]

i quite interested to find some parts to improve my speed... suggestion?

 

you have just sign up for low cost performance enhancement diy ..

1. oiler...tip top chains...put back the horsepower which is lost as a result of a badly maintained chains..

2...exhaust wrap...this will boost your bike power...

 

as regards to fuel consumptions improvement.. more power = more fuel needed..

but if you are careful rider....you may see some improvement ..or no change..

 

an d your ride is

'smoother' as may riders have experienced

Edited July 17, 2011 by ezzyoiler

[sujak]

i quite interested to find some parts to improve my speed... suggestion?

 

theres a forumer selling X1 Racing Engine for $600 if you are interested..

[LTC]

theres a forumer selling X1 Racing Engine for $600 if you are interested..

 

U think S4 engine can fit in X1-R?