[Group] SBF Yamaha 125Z

[uma-man]

Fx gt pm me the add.. as for direction I am totally lost

 

ok you foward to me.. i ask my cuzz or my mech there.

[syeDsTp]

This problem just start only..the old problem ok le I have change all those thing le

Den start this problem

 

if your normal idling is around 1 but when ride 3+ rpm when stop, maybe your cdi spoil or gasket tear..

[fx110]

from the previous experience:-

1.Carb joint leak/crack

2.Crankshaft oil seal leak, mostly is magneto side, but the possibility of primary gear's side also have.....

 

btw good stuff for 125z,

http://img.photobucket.com/albums/v205/fx110/motor/YIES/20060611056.jpg

http://img.photobucket.com/albums/v205/fx110/motor/YIES/20060611053.jpg

 

but now waiting for arrival....

[Tequila]

wah you dig old post uh? hahah. so good.

 

not sure abt that.. done that 3yrs ago liao.. haha but my fuel consumption is 30-33km/L.. or 130-140km per 4L full tank. mine all standard except piston la.. i dont think it affect much my FC.. if u have the stock and unpoked one, want exchange? hehe

 

i want find 0.0 size.. if 0.0 size but ported also dont mind.. hehe

 

4L? kecik nah pe tank ko? aku nyer 5.5L tau tank. hmm give me some time to think about if first k bro. aku peh stock habis pon, aku kt highway average speed about 130-140km, minyak aku about 22-24km/litre bile tgh running in that time, abt 30-32km/litre. so big difference :(

[Jack-steiger]

eh guyz wanna ask ur..ur haf experience when the bike stop at netural gear den when wan kick 1st n go it keep jump back to netural o.0

[Weiming1990]

if your normal idling is around 1 but when ride 3+ rpm when stop, maybe your cdi spoil or gasket tear..

 

Ya my idling is 1 when stop stuck at 3 +..so now the problem is carb and gasket tear rite

, how much will that cost

[rozaliq]

from the previous experience:-

1.Carb joint leak/crack

2.Crankshaft oil seal leak, mostly is magneto side, but the possibility of primary gear's side also have.....

 

btw good stuff for 125z,

http://img.photobucket.com/albums/v205/fx110/motor/YIES/20060611056.jpg

http://img.photobucket.com/albums/v205/fx110/motor/YIES/20060611053.jpg

 

but now waiting for arrival....

 

actually bro u can D.I.Y, just get a small wd40 bottle enpty it, cause its about 125ml..

the trick is the bottle must not be bigger than ur bike's capacity (in this case 125cc)

then poke a hole in ur carb manifold, fot it it with a hollow piece of metal join it with a rubber tube.

the make sure u dont have any leaks... and u have a D.I.Y boost bottle...lol

i didi it for mine...hahahah

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196088_1295564566292_1745694803_524990_709893_n.jpg

[rozaliq]

another D.I.Y project that i did under my block yesterday, just wanna share it with u guys

 

bought the meter online for just above $100.. anibody intrested. just drop me a message.

 

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/216234_1322268993886_1745694803_556444_2246033_n.jpg

 

looks like kosorx1n, works fine

[fx110]

another D.I.Y project that i did under my block yesterday, just wanna share it with u guys

 

bought the meter online for just below $100.. anibody intrested. just drop me a message.

 

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/216234_1322268993886_1745694803_556444_2246033_n.jpg

 

looks like kosorx1n, works fine

 

Good job there ^^

actually bro u can D.I.Y, just get a small wd40 bottle enpty it, cause its about 125ml..

the trick is the bottle must not be bigger than ur bike's capacity (in this case 125cc)

then poke a hole in ur carb manifold, fot it it with a hollow piece of metal join it with a rubber tube.

the make sure u dont have any leaks... and u have a D.I.Y boost bottle...lol

i didi it for mine...hahahah

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196088_1295564566292_1745694803_524990_709893_n.jpg

 

yah....

[hakeiym]

another D.I.Y project that i did under my block yesterday, just wanna share it with u guys

 

bought the meter online for just below $100.. anibody intrested. just drop me a message.

 

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/216234_1322268993886_1745694803_556444_2246033_n.jpg

 

looks like kosorx1n, works fine

 

After changing it, the speed gt change? As in more accurate? Looks like gt gear indicator

[bustop]

Need help my rpm stuck at 3 or 4 when I stop bike

, I have ask the shop if he lower my rpm It hard to start .

 

This problem just start only..the old problem ok le I have change all those thing le

Den start this problem

 

eh bro, seriously go planet and check it out. i don't think any1 here got solution to your problem. Go ask ah chong.

 

actually bro u can D.I.Y, just get a small wd40 bottle enpty it, cause its about 125ml..

the trick is the bottle must not be bigger than ur bike's capacity (in this case 125cc)

then poke a hole in ur carb manifold, fot it it with a hollow piece of metal join it with a rubber tube.

the make sure u dont have any leaks... and u have a D.I.Y boost bottle...lol

i didi it for mine...hahahah

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196088_1295564566292_1745694803_524990_709893_n.jpg

 

diy ah! actually does this "boost bottle" thingy really works?

 

another D.I.Y project that i did under my block yesterday, just wanna share it with u guys

 

bought the meter online for just below $100.. anibody intrested. just drop me a message.

 

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/216234_1322268993886_1745694803_556444_2246033_n.jpg

 

looks like kosorx1n, works fine

 

wah. cantikkkkkkkkkk

[fx110]

diy ah! actually does this "boost bottle" thingy really works?

cube baru tahu, penjimatan bahan bakar dan ke"smooth"an ketika low RPM yg sukar dipercayai,

FYI, RX-Z KRR and SP(RR) even the old Yamaha RX100 and RX-K was come as standard equipment,

but i dont understand Yamaha dont make for 125z and TZM.....

[Weiming1990]

eh bro, seriously go planet and check it out. i don't think any1 here got solution to your problem. Go ask ah chong.

 

Ok thanks bro

[uma-man]

4L? kecik nah pe tank ko? aku nyer 5.5L tau tank. hmm give me some time to think about if first k bro. aku peh stock habis pon, aku kt highway average speed about 130-140km, minyak aku about 22-24km/litre bile tgh running in that time, abt 30-32km/litre. so big difference :(

 

LOL.. obviously la.. when you running in is you ride below 100, now u ride 130-140.. thats y u see the drastic change of FC.. the faster u go, more power u need mah..

[Weiming1990]

Unique motor or planet cheaper and better?

[rozaliq]

After changing it, the speed gt change? As in more accurate? Looks like gt gear indicator

 

Yeah bro the speed more accurate, i rode with my friend's k7, compared the speed and it was only 1 or 2 km/h off... Rather then the old stock meter which was way off...

 

Gear indicator.. Huhuhu.. Wished it had..but it dosent.. Lol

 

I think im gonna start a CMO for this meter.. Anibody intrested???

[rozaliq]

Double post

[Tequila]

Yeah bro the speed more accurate, i rode with my friend's k7, compared the speed and it was only 1 or 2 km/h off... Rather then the old stock meter which was way off...

 

Gear indicator.. Huhuhu.. Wished it had..but it dosent.. Lol

 

I think im gonna start a CMO for this meter.. Anibody intrested???

 

try campurkan dgn duit upah tlg pasangkan skali uh,maybe charge about $30 for a start? that might helps =)

[syeDsTp]

Yeah bro the speed more accurate, i rode with my friend's k7, compared the speed and it was only 1 or 2 km/h off... Rather then the old stock meter which was way off...

 

Gear indicator.. Huhuhu.. Wished it had..but it dosent.. Lol

 

I think im gonna start a CMO for this meter.. Anibody intrested???

 

the meter for 125z? how about the lights? u diy or already come like that? the speedo is digital?? if the meter is accurate like u claim, im quite interested!

[rozaliq]

the meter for 125z? how about the lights? u diy or already come like that? the speedo is digital?? if the meter is accurate like u claim, im quite interested!

 

Intrested to know more sms me 98404079

[nutboy]

my throttle seems got abit of prob. when full throttle its ok. but when 4k rpm at top gear i light throttle the thing like a bit jam. seems like throttle not fully open when light throttled, hav to throttle more then ok. when hard throttle no pron. any one experience this??

[syeDsTp]

Intrested to know more sms me 98404079

 

can post more clearer pics of it?

[Mark Yeow]

Those whom mass ordered together with me.. your stocks are here! Call me for collection ya...83667566. Supplier just gave me stock.. hehehe

 

http://i83.photobucket.com/albums/j292/dyno_88/LED/IMG_0084.jpg

http://i83.photobucket.com/albums/j292/dyno_88/LED/IMG_0083.jpg

http://i83.photobucket.com/albums/j292/dyno_88/LED/IMG_0081.jpg

http://i83.photobucket.com/albums/j292/dyno_88/LED/IMG_0079.jpg

[thrasher]

Anyone can help me... What type of bulbs 125z use ah? Its h what?

[bustop]

cube baru tahu, penjimatan bahan bakar dan ke"smooth"an ketika low RPM yg sukar dipercayai,

FYI, RX-Z KRR and SP(RR) even the old Yamaha RX100 and RX-K was come as standard equipment,

but i dont understand Yamaha dont make for 125z and TZM.....

 

alamak bro, wa tak paham ah. Chim sgt ah, simple malay still can paham.

 

oh, i never knew some bikes come as standard..

 

Unique motor or planet cheaper and better?

 

planet.