SBF Kymco Downtown 125/200/300/350i Cafe 2013

[SGGH]

Really ah? Then any suggestion? Haha. my house no multistorey until 2017

 

Sent from my SM-N9005 using Tapatalk

[ProFatSir]

Kim Hup Lek Trading

Blk 47 Bendemeer Road #01-1461 S330047

Michael is the son who had worked that 30 years(since childhood)

 

I went to 219 to ask for qoute, minimum is 95 onwards for the rewrap.

I asked Michael, he qoute me 60, most expensive and quality one, 80.

 

Gotten my Amourall Spray there at 7bucks too.

 

Yup Michael. ..

 

Do you feel that he look like zhang ke fan?

I also visit that shop since i started riding.

He reshape/rewrap my s4 seat.

Very well done.

 

sent from sony ericsson GH388H

[ProFatSir]

I don't think a cover is good for outdoor parking. It's a magnet for cats to snuggle within. It was like this during my younger days when staying with my parents HDB flat with outdoor parking

 

Yup.cat will go in.

Use the cat spike from daiso

Or use pepper

 

 

sent from sony ericsson GH388H

[Mark Yeow]

Yup.cat will go in.

Use the cat spike from daiso

Or use pepper

 

 

sent from sony ericsson GH388H

 

pepper definitely works very well

[parotae]

http://www.singaporebikes.com/forums/attachment.php?attachmentid=303096&d=1397557281

Edited April 16, 2014 by parotae

[SGGH]

[ATTACH]303096[/ATTACH]

 

Sent from my GT-N7105 using Tapatalk

 

i guess i'll use pepper! Anw, will like to consult if you know how i can connect a car camera to the underside of the socket. or where should i wire it to?

[ProFatSir]

i guess i'll use pepper! Anw, will like to consult if you know how i can connect a car camera to the underside of the socket. or where should i wire it to?

 

The original glove compartment socket supply very small amp for hp/gps charging,I scare if you run more device,the fuse will blow.

 

You can do the following.

1-Drill hole to the glove box,connect to current socket.

 

2- rewiring using relay.

 

 

 

 

 

sent from sony ericsson GH388H

[SGGH]

The original glove compartment socket supply very small amp for hp/gps charging,I scare if you run more device,the fuse will blow.

 

You can do the following.

1-Drill hole to the glove box,connect to current socket.

 

2- rewiring using relay.

 

 

 

 

 

sent from sony ericsson GH388H

 

Oic. i didn't want to drill the whole. later not weather proof anymore. I using a battery charger for hp instead for the camera. Trying to see how i can mount the wallet size device. if not i think i'll need to go buy a small one.

[SGGH]

i think today i'll go daiso to get those velcro so that can secure it to the bike. looking for a good position to put it. Anw, what sticky tape should i just for best effect. hope i won't spoil the surfaces and strong enough to hold. any suggestions?

[hqx]

i think today i'll go daiso to get those velcro so that can secure it to the bike. looking for a good position to put it. Anw, what sticky tape should i just for best effect. hope i won't spoil the surfaces and strong enough to hold. any suggestions?

 

 

look for the 3m thick double side tape.

[SGGH]

look for the 3m thick double side tape.

 

I only scared it will melt under sun. But so far only weekends it's under sun in my house car park. Other than that. I'm in office all day. Underground car park.

 

Sent from my SM-N9005 using Tapatalk

[ProFatSir]

I only scared it will melt under sun. But so far only weekends it's under sun in my house car park. Other than that. I'm in office all day. Underground car park.

 

Sent from my SM-N9005 using Tapatalk

 

Will not melt.

Using 3M to stick my IU.

 

sent from sony ericsson GH388H

[SGGH]

I don't think a cover is good for outdoor parking. It's a magnet for cats to snuggle within. It was like this during my younger days when staying with my parents HDB flat with outdoor parking

 

Anyway, just want to say thanks for the bike! it's really in a tip top condition and as compared, i think i got a better deal! Thanks so much for sharing your information, hope you can ride with us soon. You prolly should go for a Myroad700i? Regards!

[paithorn]

Anyway, just want to say thanks for the bike! it's really in a tip top condition and as compared, i think i got a better deal! Thanks so much for sharing your information, hope you can ride with us soon. You prolly should go for a Myroad700i? Regards!

 

Hey. Thanks for making the transaction a smooth and no frills one too.

 

Enjoy the bike. I like the DT300! In fact I have not held a bike for so long for the past decade or so....

 

I may be getting the exciting 400 or the C650GT. But let me try to get a successful COE bid first. Haha

[SGGH]

Lol. NTUC made you wait 3 hours. Hahaha. If not we could had done it at 10.

 

Sent from my SM-N9005 using Tapatalk

[SGGH]

I google C650GT super nice

 

Sent from my SM-N9005 using Tapatalk

[SGGH]

Bro, you still using Amourall for your parts? is there a horizontal bar that can fit from mirror to mirror?

[Bike Yong]

Hey. Thanks for making the transaction a smooth and no frills one too.

 

Enjoy the bike. I like the DT300! In fact I have not held a bike for so long for the past decade or so....

 

I may be getting the exciting 400 or the C650GT. But let me try to get a successful COE bid first. Haha

 

Bro the new x400i will reach sg by 28th april. =)

[Davesg]

hi guys

 

im thinking of getting a scooter, restricted to 200cc. im a little on the tall side 184cm and ive being scoot hunting but most available for me to seat on are Syms.. i will probably be raising the seat cushion and on sym the handle bar seems a little awkward and stuff. im using this site "www.cycle-ergo.com" to estimate. kymoco handle bar seems a little friendlier with raised cushions. Have a couple of questions hope you guys can help.

 

Is Downtown 300i and 200i similar in body and difference is only the engine cap?

and

Is the Xciting 200i,300i and 400i all similar in body as well?

 

Reason im asking is these 2 models seems to have the most ideal stock handlebar angle on the ergo website but their engine spec is different.

 

Thanks in advance for any and all help

[kongfu]

hi guys

 

im thinking of getting a scooter, restricted to 200cc. im a little on the tall side 184cm and ive being scoot hunting but most available for me to seat on are Syms.. i will probably be raising the seat cushion and on sym the handle bar seems a little awkward and stuff. im using this site "www.cycle-ergo.com" to estimate. kymoco handle bar seems a little friendlier with raised cushions. Have a couple of questions hope you guys can help.

 

Is Downtown 300i and 200i similar in body and difference is only the engine cap?

and

Is the Xciting 200i,300i and 400i all similar in body as well?

 

Reason im asking is these 2 models seems to have the most ideal stock handlebar angle on the ergo website but their engine spec is different.

 

Thanks in advance for any and all help

 

Body is same for dt 200 or 300 but all xciting have different body for different cc...

 

Sent from my SM-N9005 using Tapatalk

[solaris]

hi guys

 

im thinking of getting a scooter, restricted to 200cc. im a little on the tall side 184cm and ive being scoot hunting but most available for me to seat on are Syms.. i will probably be raising the seat cushion and on sym the handle bar seems a little awkward and stuff. im using this site "www.cycle-ergo.com" to estimate. kymoco handle bar seems a little friendlier with raised cushions. Have a couple of questions hope you guys can help.

 

Is Downtown 300i and 200i similar in body and difference is only the engine cap?

and

Is the Xciting 200i,300i and 400i all similar in body as well?

 

Reason im asking is these 2 models seems to have the most ideal stock handlebar angle on the ergo website but their engine spec is different.

 

Thanks in advance for any and all help

 

Welcome to the kymco forum I can't say much for the xciting models but for the downtown the bodies are the same on the engine cc is different. Original cc of the DT is 300. From my understanding, kymco started to down-bore the engine to 199cc to accommodate to sg's restrictions. I've been riding the DT 200i for 6 mths plus now, experience has been good. Adequate pick up speed, comfortable cruising at 90 - 100km. Large underseat storage, add a 50l topbox and u can hold loads of stuffs.

 

I'm 1.72, plus my boots around 1.75. No prob with the bike. Go down to motorsports and sit on the bike yourself, that's the best way to know if the position is ideal for u Hope I've helped

 

Sent from my SM-N9005 using Tapatalk

[Davesg]

@ kongfu thanks for that bit of info i think best like solaris mention is to drop by for a look, will have to call them to see what model is located where

 

@ solaris thanks as well, downtown seems pretty nice ashame the coe is a bit scary now, bike might be too new for the used market and i dun suppose they will allow a test ride on a new bike may i know how much was it for you OTR 6 mths ago for the DT?

[kongfu]

@ kongfu thanks for that bit of info i think best like solaris mention is to drop by for a look, will have to call them to see what model is located where

 

@ solaris thanks as well, downtown seems pretty nice ashame the coe is a bit scary now, bike might be too new for the used market and i dun suppose they will allow a test ride on a new bike may i know how much was it for you OTR 6 mths ago for the DT?

 

Bro u might wanna give bikeyong in this forum a PM. He will be able to assist you better. Arrange with h8m to view the bikes and at the same time answering your queries if needed.

 

Sent from my SM-N9005 using Tapatalk

[dingsa]

Anyone knows of any downtown that's up for sale?

 

Sent from my GT-N7105 using Tapatalk

[yancurly8]

Hi,

 

 

Anyone can help wae to source for downtown 300i right panels? Involved in RTA.. Me Considerin if wana seal and paint or simply new panels.. Thanks in advance!