Paddock stand

[aalphaa]

Any idea which one to get?

Damn tired of pushing the bike, then bend down again when cleaning,"lubing" the chain...

[Hydher]

jalan besar near ah boy. what bike u riding.

[fabianeng]

hi, yap i'm also into getting a paddock stand or device that can allow me to jack the bike up so i can at least wash and lube my chain w/o looking like an idiot ) if there's anything else that can jack the whole bike up en better.

 

hmmm, near ah boy? any shop name?

 

hope its not going to be too ex

 

thanks!

[Hydher]

about 20. can ask ah boy and he will direct you.

[KeraKing]

about 20. can ask ah boy and he will direct you.

 

wah $20 for a paddock stand?

good price.

[Hydher]

sry, thats for a scissors jack.

[SpiritualRain13]

Paddock Stand MotoWorld selling for $120 if i'm nt mistaken. Gt two types of Clamps avaliable. But now out of stock sia. Me also lookin for one. Any other place i can get one...

btw Bro Hydher wats a Scissors Jack

[deckard]

is there an MO going on?

[schwein.bissen]

hi, yap i'm also into getting a paddock stand or device that can allow me to jack the bike up so i can at least wash and lube my chain w/o looking like an idiot

I use a pair of car axle stands (supporting the footrests) to jack up the rear of the bike ...

[Hydher]

scissors jack is for sidestand bikes.

[vfrT]

You can wedge a piece of timber 25mm x 50mm section by say 350mm long (depending on the distance between the floor and the point of support - usually the right rear wheel axle nut) to lift the rear wheel of the ground. The timber should be long enough to raise the rear wheel just enough above the ground to rotate the wheel. Chock the front wheel or bump it against a kerb to prevent it rolling forward just to be be safe. Cost=$0.

 

I use a paddock stand but the stick is easier to lug around.