problem with bike gear shift lever.

[jremio]

hey guys

 

i experience a problem shifting gears on my rxk. it used to be fine, however, after riding it home today on the PIE, the gear shift lever became very hard to "kick", and i have difficulties changing from gear 1 to N and from N to gear 1. is it due to the fact that the engine is overheated? because traffic on the PIE was quite bad today.

 

thanks.

[jayz]

change clutch cable will do. it's faulty.

[CyanSupra]

should be the clutch plate.

encountered it b4.

[yeukeong]

How about ur clutch lever, is it hard to clutch in?

[jremio]

How about ur clutch lever, is it hard to clutch in?

 

nope the clutch lever works fine. i think might be engine oil needa change liao.. but i changed it 1000km ago... dunno the prob. just hope nothing major. now everytime i down gear to gear 1 will have a loud sound, like the chain hitting the swingarm i think.

[knucklehead]

try loosen out your clutch . it MIGHT help.

is your clutch very near? as in release clutch abit and then the bike can move?

also check your clutch adjuster at the other end.

 

you down gear, the sound is 'KETAK' sound right? and i assume it's the same when u wanna shift to other gears, not only 1 t0 N or N to 1 ...

 

shouldn't be the clutch plates for now ...

[jremio]

try loosen out your clutch . it MIGHT help.

is your clutch very near? as in release clutch abit and then the bike can move?

also check your clutch adjuster at the other end.

 

you down gear, the sound is 'KETAK' sound right? and i assume it's the same when u wanna shift to other gears, not only 1 t0 N or N to 1 ...

 

shouldn't be the clutch plates for now ...

 

yes indeed man. its the 'KETAK' sound. is that normal? ok ill bring my bike for oil change and clutch tuning tmr and see if the problem is rectified or not.. thanks for the reply.

[rocklobster]

i think check the clutch cable and the screw... last time i tightened it too much, kick gear very tough and have a loud clicking sound... want to kick to neutral also have to rev very hard before can find even move the lever...

[jtzx]

if all above still cant solve, it might be gear box already.. Need to change once every 10year in general =D