The GSXR 600,750 & 1000 Hangout. Where All GSXR Riders Chill And Gather!!

[Guest kimderson]

Originally posted by Sir_Romeo@Nov 19 2004, 11:25 PM

brothers what yr opion of k5 600?

for the k5 i think the black /white is nice. heard that the brake system is a improve verision of k4. dunno true or not .

[Vtec1605198534]

Originally posted by rhema83@Nov 20 2004, 08:03 AM

I attached a pic of the bike. Please verify. The owner tells me that it's a 2001 FI model, so it should be the K1 ba.

 

SGD7500, confirmed. Not bluffing. Too bad you guys can't have it even if I don't buy it. Read my signature to find out why...

wth....the bike is in us?

[Vtec1605198534]

Originally posted by kimderson@Nov 20 2004, 09:39 AM

for the k5 i think the black /white is nice. heard that the brake system is a improve verision of k4. dunno true or not .

i think the one in my siggy looks better...

[MC21]

Originally posted by MC28@Nov 20 2004, 03:01 AM

when u take bike?

i last wed take liao lor

[rng774]

Hi guys. I thought of getting a Dynojet Powercommander for my 600K4. Any comments ?? 'cause i heard it can improve on aceleration alot.

[MC28]

Originally posted by rng774@Nov 20 2004, 11:31 PM

Hi guys. I thought of getting a Dynojet Powercommander for my 600K4. Any comments ?? 'cause i heard it can improve on aceleration alot.

it depend on how u tune it.can tune it for fuel efficient,better pickup blah blah blah..personally i wont go for it cos it intercept ur original ingition signal,re-route + scramble it be4 sending it back thus improving certain things..perfer the teka SFI mapping i did to my bike.anyway,if i were to choose..i rather go for a yoshi ems anytime..personal opinion..

[Vtec1605198534]

Originally posted by rng774@Nov 20 2004, 11:31 PM

Hi guys. I thought of getting a Dynojet Powercommander for my 600K4. Any comments ?? 'cause i heard it can improve on aceleration alot.

if ur bike is fully stock, not realli useful to get a pc....unless u install full system, change to race end can, bla bla with all the mods, tat where pc come into use......for stock bike, u can try the teka mapping....works for mi.......

[rhema83]

Originally posted by [V

tec,Nov 19 2004, 11:45 PM] wth....the bike is in us?

Forgot to clarify. I am studying overseas lah. I am still deciding. I have the money for either the bike plus a crap car (or no car), or a not-too-bad car. The price is irresistable, although I might get headache selling it in future.

 

I've heard good things about the G6. Reputed to be the best 600cc supersport. Please help me verify that the bike below is the K1...

 

http://www.people.cornell.edu/pages/ml362/K1G6.jpg

[MC28]

600+ for a pc3 usb compare to a teka mapping which cost 50-150 and u get the same outcome..u choose..

[kinwei]

Originally posted by MC28@Nov 21 2004, 12:29 PM

600+ for a pc3 usb compare to a teka mapping which cost 50-150 and u get the same outcome..u choose..

Where to do the teka mapping??

[chottoh_89]

Originally posted by MC28@Nov 21 2004, 12:29 PM

600+ for a pc3 usb compare to a teka mapping which cost 50-150 and u get the same outcome..u choose..

is not the same outcome loh.... putting a pc3 include mapping lor if u just go for mapping if wont help in increasing yr bike hp......so if have the money put a pc3 inside u will feel the different...

[chottoh_89]

Anybody wan to put pc3 $$650... put yr bike around 2 days for better effect....

[MC28]

Extracted From http://www.powercommander.com

 

What is Power Commander?

The PC is a fuel injection and ignition timing (on some models) adjustment unit that plugs "inline" with the bikes' stock ECU. The PC uses original equipment style connectors so that no splicing or cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5 minutes. Changes are made to the bikes fuel and ignition curves via the PC's onboard microprocessor. Using this technology we are able to offer a large area of adjustment without making any permanent changes to the bikes' ECU (electronic control unit). Removing the PC returns the bike to its previous stock condition. The Power Commander can be ordered preprogrammed with a your choice of several settings, based on the modifications to your bike. The unit also comes complete with software and cable link that allows you to change between different maps or make adjustments to a map file.

 

How much Power will it give me?

Well that can depend upon many things but what we can tell you is "The perfect air/fuel ratio will ensure that the engine can produce the maximum possible horsepower for that given combination". We must also understand that a typical street rider spends a great deal of time riding in part throttle conditions. Shown below are two graphs of a motorcycle before and after installation of the Power Commander . The top graph shows the horsepower curve accelerating at a 40% throttle opening and the lower graph shows the corresponding air / fuel ratio. You can see a large horsepower increase between the two. The red curve shows a typical stock motorcycle with minor performance modifications (slip-on exhaust). The blue curve shows that same combination with the PC installed and you can see that the line is nearly straight. So the rider will feel a large improvement while riding the motorcycle and it is very possible that the peak wide open throttle horsepower is unchanged. The correct air/fuel ratio number (say 12.9:1 or 13.2:1) depends upon many factors like combustion chamber design but what we want is that figure at every point in the curve (straight line).

 

More at http://www.powercommander.com/featintro.shtml

 

 

in short,ur bike wont have hiccups...

[Vtec1605198534]

Originally posted by rhema83@Nov 21 2004, 05:40 AM

I've heard good things about the G6. Reputed to be the best 600cc supersport. Please help me verify that the bike below is the K1...

tat is a K1

[DREAM]

guys, like to ask tat for suzuki bike is it better to have the EMS or the PC3? whats the differences ?

[rng774]

I think PC3 works . 'cos i have already install.

[MPeX]

Originally posted by rng774@Nov 21 2004, 11:42 PM

I think PC3 works . 'cos i have already install.

Would u like to give us a field report on the PC3? Tell us more!

[K600]

Hi to all k4 600 rider,u all got any outing gathering or not ?

[MC28]

ya..we nid a field report on a pc3 install on a stock bike..how it works for u?wat improvement it gives?

[MC28]

mpex,have u change ur air filter?

[MPeX]

Originally posted by MC28@Nov 22 2004, 03:01 PM

mpex,have u change ur air filter?

Nope, not in stock yet. I placed an order thru BikeLab..

 

Ordered for weeks leow. Have u received urs?

[MC28]

Originally posted by MPeX@Nov 22 2004, 03:51 PM

Nope, not in stock yet. I placed an order thru BikeLab..

 

Ordered for weeks leow. Have u received urs?

u order wat brand one?i going down to sporting to get the bmc race filter tml after work..last piece..

[MPeX]

Originally posted by MC28@Nov 22 2004, 05:48 PM

u order wat brand one?i going down to sporting to get the bmc race filter tml after work..last piece..

K&N.

 

Should be here soon. Even the MO ones aren't here yet also.. so i guess itz the freight that's delayed...

[MC28]

Originally posted by MPeX@Nov 22 2004, 05:55 PM

K&N.

 

Should be here soon. Even the MO ones aren't here yet also.. so i guess itz the freight that's delayed...

how much u paying for it?

[MC21]

Originally posted by MC28@Nov 23 2004, 09:14 AM

how much u paying for it?

wah so fast become project bike liao sia.... :sweat: