jupiter mx 135

[BearIsHere]

Whats the problem?

 

Ever since down fork den the alignment jus cnt be straight like how it used to be... Have been gg back to my workshop and my mech jus tell me its straight alredy... But im the one riding so i will feel it therefore i need another workshop to rectify my problem...

[Lim Ah Wan]

any shops for recommendations? how much does it cost to change rims n tyres? thank u

 

Get it done in JB. Much cheaper. Cost around RM195 for rims itself, without new bearings, valves etc. Tyres around RM160 onwards depending on brand & size. If you want it done in SG, not much choices and its gonna cost alot more $$$.

 

Ever since down fork den the alignment jus cnt be straight like how it used to be... Have been gg back to my workshop and my mech jus tell me its straight alredy... But im the one riding so i will feel it therefore i need another workshop to rectify my problem...

 

Squat infront of your bike & take a closer look at the fork tubes. Since you downfork, are they properly aligned? Maybe one is slightly lower than the other, causing you to feel the difference. Or get a mech to check the fork oil. Maybe one if them has lesser fork oil than the other. Several factors can lead to this. Hard to say without seeing the bike itself.

[y2kredbull]

Get it done in JB. Much cheaper. Cost around RM195 for rims itself, without new bearings, valves etc. Tyres around RM160 onwards depending on brand & size. If you want it done in SG, not much choices and its gonna cost alot more $$$.

 

 

 

Squat infront of your bike & take a closer look at the fork tubes. Since you downfork, are they properly aligned? Maybe one is slightly lower than the other, causing you to feel the difference. Or get a mech to check the fork oil. Maybe one if them has lesser fork oil than the other. Several factors can lead to this. Hard to say without seeing the bike itself.

 

Power lah lu Lim Ah Wan.

[Lim Ah Wan]

Power lah lu Lim Ah Wan.

 

Eh alamak what you doing here? Gonna buy Jupiter MX next ah?

[alep20]

have any one tried the sprocket combination of 15-40?care to give some reviews?

[alep20]

Between the oil filter cover & the engine casing, there should be a rubber seal. Its either the rubber seal is missing or not placed properly. Therefore EO can leak out. The only way is to remove the oil filter cover to check. But it is gonna spill out your EO.

 

So do not start the bike, get a friend & tilt your bike to the side with the oil filter cover facing upwards. When I say tilt, I mean tilt as low as possible until the bike almost touches the floor, then remove the oil filter cover. Only a little of EO will spill out. Check everything is okay and in placed, then tighten everything back & check if there is still a leak.

 

bro wat if everything is ok yet it still leak?

[Lim Ah Wan]

have any one tried the sprocket combination of 15-40?care to give some reviews?

 

You try first lah bro then can give review. Hehehe.

 

bro wat if everything is ok yet it still leak?

 

Then maybe its best you let a mech check it for you. Its hard for me to troubleshoot without seeing the bike itself.

[Jupiter9002]

Lim Ah Wan ... if Jupiter go genting, jupiter will die ?

[Lim Ah Wan]

Lim Ah Wan ... if Jupiter go genting, jupiter will die ?

 

I know a fellow Spark rider who rode up to Vietnam & China. So what do you think?

[y2kredbull]

Eh alamak what you doing here? Gonna buy Jupiter MX next ah?

 

Maybe..who knows..must tempt me with a legal yoshimura first.. :-)

 

Sent from my GT-I9305 using Tapatalk 2

[Lim Ah Wan]

Maybe..who knows..must tempt me with a legal yoshimura first.. :-)

 

Sent from my GT-I9305 using Tapatalk 2

 

That is gonna take awhile.

 

Latest news from Motoworld was that LTA claims the tri cone they sent for approval is too loud. Need to soften it a little. So some amendments had to be made & send for approval again.

[Jupiter9002]

I know a fellow Spark rider who rode up to Vietnam & China. So what do you think?

 

The slope so steep, and 1.2km above sea, worry it will die half way ... :-) ...

Thanks ...

[Lim Ah Wan]

The slope so steep, and 1.2km above sea, worry it will die half way ... :-) ...

Thanks ...

 

Should not be an issue as many malaysians there go to work daily on their motorcycles too.

[bengie]

That is gonna take awhile.

 

Latest news from Motoworld was that LTA claims the tri cone they sent for approval is too loud. Need to soften it a little. So some amendments had to be made & send for approval again.

 

wow again... it have been months n so many waiting for approval.. can't they just use the old specs like round cone n as long same db loud sure can pass one ma?

[Lim Ah Wan]

wow again... it have been months n so many waiting for approval.. can't they just use the old specs like round cone n as long same db loud sure can pass one ma?

 

I think now maybe LTA has more stricter requirements. I am sure Motoworld is trying their best to get it approved, so as Gmax.

[ASRI_AK]

Just saw wing yap new 6 piece add on coverset for Jupiter.

Go check it out. Price 4xx.

What you guys think about it?

 

Wonder if jb got sell. Hmm..

[Lim Ah Wan]

Just saw wing yap new 6 piece add on coverset for Jupiter.

Go check it out. Price 4xx.

What you guys think about it?

 

Wonder if jb got sell. Hmm..

 

JB have. Around RM250 for plain ones.

[ASRI_AK]

JB have. Around RM250 for plain ones.

 

They have? Holy toot! The whole coverset or just the add on?

[Lim Ah Wan]

They have? Holy toot! The whole coverset or just the add on?

 

Have lah. Whole coverset. They have Jupiter riders in Malaysia mah.

 

If I'm not wrong, they have it in plain black, white, blue & red. Not sure if they brought in more colours.

[Lim Ah Wan]

Sorry I just read your post carefully. To me the add ons you are referring to are way too fugly. Seriously.

[ASRI_AK]

Have lah. Whole coverset. They have Jupiter riders in Malaysia mah.

 

If I'm not wrong, they have it in plain black, white, blue & red. Not sure if they brought in more colours.

 

Oh cause that time I asked, they said not in yet. Since you said have already, I'll go in tomorrow night and check it out.

[Lim Ah Wan]

Oh cause that time I asked, they said not in yet. Since you said have already, I'll go in tomorrow night and check it out.

 

The shop Im talking about is WK Motorsports. The bikeshop between Kok Seng & the last restaurant. If you are planning to head to that shop tomorrow, I suggest don't as it will be closed due to Labour Day. Just a heads up for you. Not sure if other shops will be closed as well.

[alep20]

anyone here uses racing boy rims?need to clarify something

[Lim Ah Wan]

anyone here uses racing boy rims?need to clarify something

 

What's up bro?

[ASRI_AK]

The shop Im talking about is WK Motorsports. The bikeshop between Kok Seng & the last restaurant. If you are planning to head to that shop tomorrow, I suggest don't as it will be closed due to Labour Day. Just a heads up for you. Not sure if other shops will be closed as well.

 

Okay roger. Thanks for the heads up. Much appreciated.