Honda NSR150SP Riders

[gryffindor88]

anyone going in agl tonite?

[yenyenpark]

any football fan or Liverpool, Man U fan here?? wanna meet up tonight at somewhere to catch the match together??? :bouncefire:

 

KenNUFC, Toon fans will gather at Bras Basah to watch Newcastle vs Boro.. u going??

 

http://forums.hardwarezone.com/showthread....=1#post22653318

[KeIsUkE]

Originally posted by Powieee@March 03, 2007 11:56 am

The thing abt covering bike it's that it's very ley chey .. i notice many big bikes have a trend of keeping their cover in their wave's box .

 

You see them take the cover off their dragon then walk to the wave and keep the cover .. haha .. else have to go up and down , up and down ..

 

but really upz for red sun's alarm !!! really impressed !!! and tempted of course (to buy) ..

 

Hey Thanks, that the case, kena stolen my ferring liao, so TL buy alarm lor.

[helpmeplz]

IS XING HOCK OPEN TML?

[Guest SPchoo]

AGL SUPER OUTING. BE THERE OR BE SQUARE !!!!

 

http://z13.invisionfree.com/NSR150SP/index...0entry2744932

[kenNUFC]

Originally posted by yenyenpark@March 03, 2007 06:56 pm

any football fan or Liverpool, Man U fan here?? wanna meet up tonight at somewhere to catch the match together??? :bouncefire:

 

KenNUFC, Toon fans will gather at Bras Basah to watch Newcastle vs Boro.. u going??

 

http://forums.hardwarezone.com/showthread....=1#post22653318

eh never went there watch but got watch the match, wah sad lehz 0-0 sianz half.....

[fnee]

Originally posted by kenNUFC@March 04, 2007 02:26 am

eh never went there watch but got watch the match, wah sad lehz 0-0 sianz half.....

all hail john o'shea for that 91st min match winner!!!

[Slize]

hey guys if u are going agl 2nite can u help me check how much is the bracket for the lights....?? u noe the head light brackets... thanks..

[xwarrior]

anyone know whether xhm or khm got sell maxima engine oil ? how much is it?

[compfused]

Originally posted by xwarrior@March 04, 2007 11:42 am

anyone know whether xhm or khm got sell maxima engine oil ? how much is it?

No..You can get Maxima in SG..Never seen any in any of the shops across the border..Hope it helps..

[wee keong]

hey guys, came across this repsol oil here.. but all in alibaba language le.. anyone knows wat is this? something specially for repsol issit?

[compfused]

Originally posted by wee keong@March 04, 2007 12:29 pm

hey guys, came across this repsol oil here.. but all in alibaba language le.. anyone knows wat is this? something specially for repsol issit?

Should be engine oil..Not specially for repsol..More like..Specially from repsol..Ahaha..

[Ian107]

Originally posted by compfused@February 26, 2007 07:01 pm

So many $$..Why change block when its still not scratched? Unless your piston ever jammed then sure scratch the block la..Otherwise why waste $$? But then again its your $$ your bike..Do what you deem fit for it..

. my piston jammed abt 3 weeks ago.. my block was badly scratched.. but i used it back.. cos got no money.. thats why now i wanna change now.. i wun anyhow waste money one lor.. lol... then now very scary sia.. scared anytime can break down..

[yenyenpark]

Originally posted by wee keong@March 04, 2007 12:29 pm

hey guys, came across this repsol oil here.. but all in alibaba language le.. anyone knows wat is this? something specially for repsol issit?

this is an engine oil for production bike, 4T i guess.. bcos it show 10W40

[yenyenpark]

Originally posted by Ian107@March 04, 2007 12:39 pm

. my piston jammed abt 3 weeks ago.. my block was badly scratched.. but i used it back.. cos got no money.. thats why now i wanna change now.. i wun anyhow waste money one lor.. lol... then now very scary sia.. scared anytime can break down..

u better ride slowly.. the scratch will get worse.. so u prepare for the money to change the block and etc if any..

 

change block about $400 at Planet Motor.. i called FJT (Honda Dealer) quote $350 for block, so i guess 50 dollars for workmanship.. piston, pistion ring, pin and bearing.. may b up to $700..

[yenyenpark]

Originally posted by kenNUFC@March 04, 2007 02:26 am

eh never went there watch but got watch the match, wah sad lehz 0-0 sianz half.....

went there about 11pm.. super pack inside.. alot ang moh.. think most from NUFC SG Club...

[Ian107]

think i better explain how come i need a overhaul.. later people think i siao.. too much money to spare.. i also need someone to tell me how come it will happen.. cos i stil cant figure it out..

 

One day.. i was just going to bukit batok to meet my friend.. then when i was just going to stop.. the whole engine just stalled... then i tried to start again.. cannot.. then i called tow lor.. the shop near de xing..

 

then they told me.. my piston seized/jam? the ball bearing came out and got stuck and scratched the piston and block very badly.. but tt time i only changed my piston and ring.. he showed me the parts la.. so now.. the bearing is loose and the block is scratched... so i really need an overhaul.. cos i scared the same thing will happen again.. i feel like the bike got prob again...

 

anyway.. wad i dun understand is that.. how come the ball bearing will come out? cos it has been ok.. just like abt 1 week before the incident.. i feel thaht the bike like got probs starting and stuff.. i went to check.. the mech say no prob.. and my 2t also ok.. i will check regularly.. will always top up before it finishes.. dun even let it go to the low level..

[yenyenpark]

Originally posted by Ian107@March 04, 2007 12:50 pm

think i better explain how come i need a overhaul.. later people think i siao.. too much money to spare.. i also need someone to tell me how come it will happen.. cos i stil cant figure it out..

 

One day.. i was just going to bukit batok to meet my friend.. then when i was just going to stop.. the whole engine just stalled... then i tried to start again.. cannot.. then i called tow lor.. the shop near de xing..

 

then they told me.. my piston seized/jam? the ball bearing came out and got stuck and scratched the piston and block very badly.. but tt time i only changed my piston and ring.. he showed me the parts la.. so now.. the bearing is loose and the block is scratched... so i really need an overhaul.. cos i scared the same thing will happen again.. i feel like the bike got prob again...

 

anyway.. wad i dun understand is that.. how come the ball bearing will come out? cos it has been ok.. just like abt 1 week before the incident.. i feel thaht the bike like got probs starting and stuff.. i went to check.. the mech say no prob.. and my 2t also ok.. i will check regularly.. will always top up before it finishes.. dun even let it go to the low level..

where did u go for bike service?? hmm.. i personally think some workmanship problem or part is not original..

 

by the way, where is bearing seated? i got my block opened 3 times.. but i dun see any bearing like tat..

 

like i said, the block scratches will get worse.. bcos it did for my block.. first open, scratch not abit shorter.. later longer.. later can see got small line elsewhere..

 

i asked mec.. he jus smiled.. he showed me some other block which tear.. worse than mine.. well.. i guess it's wear and tear bah.. if i changed can tahan for another 5 years.. why not.. worth the value rite??

[compfused]

The piston jam..Will scratch the block coz engine movin..That force that moves the piston now by force will shatter the piston bearing..That's how the bearings go kaboom..The bearings also help in scratchin the block more..Along with the other broken metal pieces..

[wee keong]

Originally posted by yenyenpark@March 04, 2007 12:44 pm

this is an engine oil for production bike, 4T i guess.. bcos it show 10W40

what is production bike? might buy it and try for my next servicing. anyone tried b4?

[Ian107]

Originally posted by compfused@March 04, 2007 01:09 pm

The piston jam..Will scratch the block coz engine movin..That force that moves the piston now by force will shatter the piston bearing..That's how the bearings go kaboom..The bearings also help in scratchin the block more..Along with the other broken metal pieces..

wah.. the way you describe damn scary wad.. i go to eddy ong at amk.. cos its near my house ma.. i still saving money to go replace everything.. i know the prob is getting worse..

[alyce]

Originally posted by j@March 03, 2007 12:30 pm

yenyenpark: jurong east.. toh guan there.. fug sh*t..

 

alyce: dat time u had this prob... how did u get ur bike to get the bikeshop? called for tow service?

 

nguoren: will contact u when i nid to change the whole ignition...

 

grr... stupid thief...

nahz. my bike the ignition v hard to switch on onli. but still can on la. but if i were you will call tow and bring to bike shop and ask them to change a new ignition for me. if not you can connect the wire and start the bike which is onli skill ppl noe how to do.

[flykite]

Originally posted by ravenSP@February 28, 2007 03:02 pm

ok you suck

 

mas ayu this weekend?

dood

 

wat happened to mas-ayu this weekend ?

 

[yenyenpark]

Originally posted by wee keong@March 04, 2007 02:00 pm

what is production bike? might buy it and try for my next servicing. anyone tried b4?

i got the info from this web.. i google and found this.. http://www.redlineoil.com/products_motoroi...=1&categoryID=1

[compfused]

Originally posted by wee keong@March 04, 2007 02:00 pm

what is production bike? might buy it and try for my next servicing. anyone tried b4?

Production bike is any bike that they produce for the public..So simple also dunno?