Honda NSR150SP Riders

[MC28]

Originally posted by ZLord@Oct 5 2004, 01:55 PM

can go 2nd link on friday? like that anytime also can go in, dont need scared jam

first link u wan go at 11+...wont jam one..certain timing..

[ZLord]

Originally posted by MC28@Oct 5 2004, 03:03 PM

my full service/top service means opeing up the piston to clean,blk,valve,carbs,flush coolant etc etc etc..

how much does it aga aga cost for sp?

[ZLord]

Originally posted by MC28@Oct 5 2004, 03:05 PM

erm,no use one..cos the stomach got carbon which cant be clear solely by whacking...opening up to burn the carbon will restore the pipe condition to those which u juz brought it out brand new...

true...for me thats enough liao lah...better save the money up for 2a bike...

[ZLord]

Originally posted by MC28@Oct 5 2004, 03:06 PM

first link u wan go at 11+...wont jam one..certain timing..

but 1st link the roads very messy...quite scary also...heard about those stories of robbing...and not much chance clear carbon...unlike 2nd link roads are wide and open

[MC28]

Originally posted by ZLord@Oct 5 2004, 03:11 PM

how much does it aga aga cost for sp?

around 130 + labour...should be less than that..remember doing mine last time for around 100 + gear oil and sparkplug change

[MC28]

Originally posted by ZLord@Oct 5 2004, 03:14 PM

but 1st link the roads very messy...quite scary also...heard about those stories of robbing...and not much chance clear carbon...unlike 2nd link roads are wide and open

i use first link for petrol and cigg..2nd link for going up north..

[ZLord]

Originally posted by MC28@Oct 5 2004, 04:04 PM

around 130 + labour...should be less than that..remember doing mine last time for around 100 + gear oil and sparkplug change

at race werkz or mah?

[ZLord]

Originally posted by MC28@Oct 5 2004, 04:05 PM

i use first link for petrol and cigg..2nd link for going up north..

i do agree that 1st link is better for petrol and cigg...2nd link would be more for touring and food

[MC28]

Originally posted by ZLord@Oct 5 2004, 04:10 PM

at race werkz or mah?

mah..race werkz could be cheaper..

[phill]

Originally posted by MC28@Oct 5 2004, 04:04 PM

around 130 + labour...should be less than that..remember doing mine last time for around 100 + gear oil and sparkplug change

racewerks at bukitmerah?

 

btw the full service u mentioned is clean valve, piston, block, pipe?

 

lidat $100 ?

[phill]

Originally posted by MC28@Oct 5 2004, 04:29 PM

mah..race werkz could be cheaper..

is this the 1 u went?

 

Mah Motorparts 19 Jln Besar Singapore 208792

[fooz]

Originally posted by ZLord@Oct 5 2004, 02:10 PM

another free way is to go whack your bike in 2nd link...can clear alot of carbon...when i went 2nd link the 1st time, i was travelling with sparks out of my pipe all the way...1st time tried top speed and drag rpm all the way...after that can feel the difference liao

drag 6th gear.. till wat rpm?...

 

btw, valve open which rpm ? 9?..

[phill]

Originally posted by fooz@Oct 5 2004, 05:19 PM

drag 6th gear.. till wat rpm?...

 

btw, valve open which rpm ? 9?..

7 lor.. u try 1st gear u will feel the power surge

[MC28]

Originally posted by phill@Oct 5 2004, 04:59 PM

is this the 1 u went?

 

Mah Motorparts 19 Jln Besar Singapore 208792

no..mah motor agencies opp lavender foodcourt...

[MC28]

Originally posted by phill@Oct 5 2004, 04:56 PM

racewerks at bukitmerah?

 

btw the full service u mentioned is clean valve, piston, block, pipe?

 

lidat $100 ?

yes..cos sp onli one piston..for pgm is double the price..

[phill]

gt a chamber pipe for sales... int pls pm me...

 

letting go cheap

[phill]

Originally posted by MC28@Oct 5 2004, 07:18 PM

yes..cos sp onli one piston..for pgm is double the price..

btw u stand there n supervise their work ?

 

if not they nv clean u oso dunno rite ?

 

erm is racewerkz at bukitmerah beside southen that block ?

[MC28]

Originally posted by phill@Oct 5 2004, 07:23 PM

btw u stand there n supervise their work ?

 

if not they nv clean u oso dunno rite ?

 

erm is racewerkz at bukitmerah beside southen that block ?

i sit outside the shop looking at my bike for 5 hrs ok..while they open up every part to clean..anyway,whether they got clean a not,after everything is done..u will feel the difference when u ride it..as for my pgm,i wasnt around cos nid 1 day to do everything..after i take it back,w0w..i'm impress...

 

and how u wana supervise when u dun even noe which tube leads to where..which part is wat..

[Ferrous]

Originally posted by ZLord@Oct 5 2004, 01:57 PM

i think can be done, but must really squeeze properly loh...very time consuming...no point

haha, if bike cover under seat den raincoat and pants cannot go under seat liaos..

its a choice

[ZLord]

Originally posted by MC28@Oct 5 2004, 04:29 PM

mah..race werkz could be cheaper..

still havent had the chance to visit race werkz yet

[ZLord]

Originally posted by phill@Oct 5 2004, 04:56 PM

racewerks at bukitmerah?

yup race werkz is at bukit merah lane now

[Ferrous]

haha, actually 1st link or 2nd link i also dun mind...

as long as got gd food, cheap petrol(preferable esso or mobil) and of cos timing after 11++pm can liaos

[ZLord]

Originally posted by fooz@Oct 5 2004, 05:19 PM

drag 6th gear.. till wat rpm?...

 

btw, valve open which rpm ? 9?..

drag till rpm10 loh...till cannot turn throttle anymore

 

sp valve opens at around rpm7, some abit more some abit less...it happens at every gear...

[ZLord]

Originally posted by phill@Oct 5 2004, 07:17 PM

7 lor.. u try 1st gear u will feel the power surge

not good to drag bike on 1st gear...if wanna drag, do it from 2nd gear onwards

[ZLord]

Originally posted by phill@Oct 5 2004, 07:19 PM

gt a chamber pipe for sales... int pls pm me...

 

letting go cheap

chamber pipe...worth changing mah?