Honda NSR150SP Riders

[MC28]

Originally posted by mitsevo@Feb 25 2005, 04:38 PM

guys, I juz went for decarbon session wif frenz on NSH.. when the valve opens, isit got the "bang... bang..." sound?? coz i juz felt tat the bike is surging forward and the cross wind is quite strong.. but i dun feel that i'm being pull backwards, but onli drag for a short distance coz nowadays malaysia tp oso very onz 1, but my aprillia 250 fren dun care and continue to drag all the way.. lolz.. may i ask isit enuff to clear the carbon in the engine and exhaust?? does it helps to clear the 2T in the exhaust pipe?? pls help to educate me a noobie.. Thx..

 

P.S avita still running in his piston ma... so nv drag..

no bang bang sound can be heard when the valve opens.the bike will feel more powerful.

 

clearing carbon using this method will onli remove minimal carbon..still the best way is to send the whole pipe to decarbon..

[mitsevo]

Originally posted by jingle@Feb 25 2005, 04:34 PM

What type of engine oil you changed? Full syth or semi syth? I usually use fully syth 4T, like Motul or Esso 4T Gold which cost around $20.

 

Fork seal and fork oil for $45 at Unity.

 

Shinko dry cell battery for $25 at Planet.

Hi, first time got a chio expert to teach me sia ... hehe... juz joking, no hard feelings lor.. u oso go to eddy ong to service yr bike ar?? I ask him he got fuch silkolene anot.. den he say dun haf, so he say use normal 1 will do.. so i tink he use semi syth ba.. i tink the brand is conoco(dunnoe wat kind of aw piao brand)..

 

so i am a carrot all right... may i noe where is unity and planet?? thks in advance..

[mitsevo]

Originally posted by Avita@Feb 25 2005, 02:44 PM

icic.. but buy from there must change engine oil myself. then change le the oil throw where haha.

i tink hkl will haf mech to do for u rite?? so is LAB.. but if u happen to DIY, den can collect the used oil and deposit at yr bikeshop u went lor...

[jingle]

Originally posted by mitsevo@Feb 25 2005, 04:54 PM

Hi, first time got a chio expert to teach me sia ... hehe... juz joking, no hard feelings lor.. u oso go to eddy ong to service yr bike ar?? I ask him he got fuch silkolene anot.. den he say dun haf, so he say use normal 1 will do.. so i tink he use semi syth ba.. i tink the brand is conoco(dunnoe wat kind of aw piao brand)..

 

so i am a carrot all right... may i noe where is unity and planet?? thks in advance..

1st time got someone say I'm expert.. So shiok. LOL..

 

Nope, I don't go to Eddy Ong. Monster service her bike there.. She is riding SP also. I only frequent a few bike shops which I'm familiar with, to avoid being chop..

 

Anyway...

 

Unity - Blk 1008 Bt Merah Lane 3 #01-16

 

Planet - Blk 3007 Ubi Rd 1 #01-430

[d0n]

Originally posted by Avita@Feb 25 2005, 02:46 PM

so how do u guys ride? cause today i saw a sp at the junction. so i follow him behind. i change upgear around 4.4 rpm and i can keep my speed around his. do u guys all drag till open valve then change gear or wat.. need advice on my riding tactnics..

huh?

usually pple dont drag until open valve then change gear

sometimes u dont have the length of road to do it also leh...haha

imagine u drag wan to open already sekali red traffic light coming already

 

juz change at ard 5K RPM for normal riding

[bgoy]

Originally posted by jingle@Feb 25 2005, 04:34 PM

Shinko dry cell battery for $25 at Planet.

thats cheap

i realised a lot of places selling for 35..same brand

[bgoy]

Originally posted by d0n^@Feb 25 2005, 10:15 AM

wah....never underestimate those kup kia cornering leh

it's really quite fun to kup corners on a kup kia also

easier to bua footpegs also

wahaha

that day went down 99bends with my fren for the 1st time

wah...really experiencing siah

the corner king has spoken

told u, first time i saw u corner going up e slip road to PIE i already knew u were a corner king in e making

[bgoy]

Originally posted by mitsevo@Feb 25 2005, 04:38 PM

guys, I juz went for decarbon session wif frenz on NSH.. when the valve opens, isit got the "bang... bang..." sound?? coz i juz felt tat the bike is surging forward and the cross wind is quite strong.. but i dun feel that i'm being pull backwards, but onli drag for a short distance coz nowadays malaysia tp oso very onz 1, but my aprillia 250 fren dun care and continue to drag all the way.. lolz.. may i ask isit enuff to clear the carbon in the engine and exhaust?? does it helps to clear the 2T in the exhaust pipe?? pls help to educate me a noobie.. Thx..

 

P.S avita still running in his piston ma... so nv drag..

actually what i meant by being pulled back is if u do a fast pickup and'you're not ready when e valve opens...u feel like ur body is being pulled backwards...but if u r used to e bike, e feeling would lessen

 

can decarbonise in SG, around 45 (juz e exhaust only)

[MC28]

Originally posted by bgoy@Feb 25 2005, 06:02 PM

actually what i meant by being pulled back is if u do a fast pickup and'you're not ready when e valve opens...u feel like ur body is being pulled backwards...but if u r used to e bike, e feeling would lessen

 

can decarbonise in SG, around 45 (juz e exhaust only)

it's best to decarbon the whole pipe..i remember paying around 90 for it last time..

[blackheart]

I'm gng HKL change tires tmr, anyone gng there do/buy things too in the afternoon?

[zHonG_85]

hi ppl... i am buying a nsr sp 2molo... its a FS plate... i check wif de bike engine n feel its okkiez... oni when in netural gear de engine sound lik got knock knock sound... when pull in clutch den will be no more... and... the RPM meter no light.... izzit need to change anything?? den when on de headlight the tail light no light... oni when pressing de rear brake den it will light... may i noe y?? cos he put put a box behind wif light 1.... scare de connection problem or wad?? cos going to get 2molo from seller... pls help me... thanks...

[MC28]

Originally posted by blackheart@Feb 25 2005, 08:19 PM

I'm gng HKL change tires tmr, anyone gng there do/buy things too in the afternoon?

better check the tyre pressure urself at some petrol kiosk after they change for u..

[Shockard]

Originally posted by mitsevo@Feb 25 2005, 04:54 PM

Hi, first time got a chio expert to teach me sia ... hehe... juz joking, no hard feelings lor.. u oso go to eddy ong to service yr bike ar?? I ask him he got fuch silkolene anot.. den he say dun haf, so he say use normal 1 will do.. so i tink he use semi syth ba.. i tink the brand is conoco(dunnoe wat kind of aw piao brand)..

 

so i am a carrot all right... may i noe where is unity and planet?? thks in advance..

Conoco not aw piao brand la.. It's a well-known brand in the states..

[Cow]

Originally posted by jingle@Feb 25 2005, 04:34 PM

What type of engine oil you changed? Full syth or semi syth? I usually use fully syth 4T, like Motul or Esso 4T Gold which cost around $20.

 

Fork seal and fork oil for $45 at Unity.

 

Shinko dry cell battery for $25 at Planet.

i change castrol hypoy 90.. cost me $15 sia.. kana tock

[Cow]

Originally posted by d0n^@Feb 25 2005, 05:33 PM

huh?

usually pple dont drag until open valve then change gear

sometimes u dont have the length of road to do it also leh...haha

imagine u drag wan to open already sekali red traffic light coming already

 

juz change at ard 5K RPM for normal riding

thanks man, i finally can settle my mind with just one post of yours. i think i will open valve only if there is a clear road and i want clear some carbon. if not i think i will upgear around say 4.5 - 5 like that.. ahah

[Cow]

Originally posted by zHonG_85@Feb 25 2005, 09:17 PM

hi ppl... i am buying a nsr sp 2molo... its a FS plate... i check wif de bike engine n feel its okkiez... oni when in netural gear de engine sound lik got knock knock sound... when pull in clutch den will be no more... and... the RPM meter no light.... izzit need to change anything?? den when on de headlight the tail light no light... oni when pressing de rear brake den it will light... may i noe y?? cos he put put a box behind wif light 1.... scare de connection problem or wad?? cos going to get 2molo from seller... pls help me... thanks...

your rpm lights very easy change one. just get the right bulb only.. the tail light must ask bgoy.. he pro le in changing.. almost spend $50 for a 50 cent DIY hahaa.. now he exp le. can teach u

[Cow]

any bros around organise DIY sessions? need learn some DIY maintainance so i can know my bike better. cant always rely on the manual haha..

[zHonG_85]

haha... izzit... i pte msg him lerz... ani1 here noe if my fuel tank got 1 short deep scracthes how shu i do abt it? can fix back de colour?? btw... my tank red colour.. can use marker mahz?? haha...

[bgoy]

Originally posted by zHonG_85@Feb 25 2005, 09:17 PM

hi ppl... i am buying a nsr sp 2molo... its a FS plate... i check wif de bike engine n feel its okkiez... oni when in netural gear de engine sound lik got knock knock sound... when pull in clutch den will be no more... and... the RPM meter no light.... izzit need to change anything?? den when on de headlight the tail light no light... oni when pressing de rear brake den it will light... may i noe y?? cos he put put a box behind wif light 1.... scare de connection problem or wad?? cos going to get 2molo from seller... pls help me... thanks...

from wat u describe..like no major prob eh..

u mentioned b4 2k for FS plate...thats damn cheap lor

[phill]

Originally posted by Avita@Feb 25 2005, 02:46 PM

so how do u guys ride? cause today i saw a sp at the junction. so i follow him behind. i change upgear around 4.4 rpm and i can keep my speed around his. do u guys all drag till open valve then change gear or wat.. need advice on my riding tactnics..

if i really speed. i drag till 9. if race then drag till 10 for 1st gear , 11-12 for other gear.

 

normal riding drag till 6 or 7

 

 

btw my valve opens at 8 .. therefore my riding style abit diff from the rest

[Barcelona-tZm-]

hey guys ... u all know how much is it to change fork seal oil .. or wadever u all call it(the thingy inside the duneo simi small black box beside ur throttle) ????

[osiris]

Originally posted by zHonG_85@Feb 26 2005, 01:11 AM

haha... izzit... i pte msg him lerz... ani1 here noe if my fuel tank got 1 short deep scracthes how shu i do abt it? can fix back de colour?? btw... my tank red colour.. can use marker mahz?? haha...

can try using sticker to cover it to prevent rust.

before sticking the sticker, might 1 2 spray the same colour 1st to have a coat of protection then sticker to add on.

[MC28]

Originally posted by Barcelona-[tZm]-@Feb 26 2005, 04:07 AM

hey guys ... u all know how much is it to change fork seal oil .. or wadever u all call it(the thingy inside the duneo simi small black box beside ur throttle) ????

it's brake fluid...

[jingle]

Originally posted by MC28@Feb 26 2005, 08:04 AM

it's brake fluid...

LOL.. Your reaction so funny..

[Dean_46]

hey guys having electrical probs wit my sp when the bike is in neutral and i start it, the green light seems to be flickering as in like low bat but i dun think is low batt but when i rev the bike to about 3-4k the light stops flickering and is like normal brightness any help will be appreciated thanks guys