Honda NSR150SP Riders

[MC28]

thanks alot. i used superglue to glue the radiator! still able to repair?

 

No issue...Your superglue cant hold much longer anyway...

 

Anyway, they will chemical wash it before welding..But u gonna strip the radiator and bring to them urself cos they dont strip for u..

[lwfc]

witness the power of the welding torch..

 

http://mangoglass.com/Micro_welding_torch_tip_2.jpg

[ahduck]

thanks alot. i used superglue to glue the radiator! still able to repair?

 

when they weld it the supergule will be vaporised.

maybe u can try use solder iron diy it 1st:angel: if all fails then being it to weld lor.

[ahduck]

witness the power of the welding torch..

 

http://mangoglass.com/Micro_welding_torch_tip_2.jpg

 

if they use this i think lagi bigger hole lor:lol:

 

http://www.modchipworld.co.uk/store/images/15w_soldering_iron.jpg

 

this 1 i think can liao:angel:

[lwfc]

this one also can.. but donnoe whether come back become what..

 

http://www.projectstern.co.uk/images/test13_1c.jpg

[MC28]

Use a soldering iron to patch larger defects in radiators made of copper and brass, which are frequently found in older models. An epoxy gun may do the trick for the aluminum radiators in newer vehicles.

 

His is probably alu...

[happyday00]

No issue...Your superglue cant hold much longer anyway...

 

Anyway, they will chemical wash it before welding..But u gonna strip the radiator and bring to them urself cos they dont strip for u..

 

oh haha. meaning i got to take out myself? and what about my coolant container? how do i fix that?

[cliv]

oh haha. meaning i got to take out myself? and what about my coolant container? how do i fix that?

 

lol ride ur bike to the bike shop and ask them to do for u and see how much they charge u lo + the container:angel:

[MC28]

oh haha. meaning i got to take out myself? and what about my coolant container? how do i fix that?

 

Did it myself last time...

 

http://jbweld.net/products/jbweld.php

 

Container wise, you can try ask Jhaox if he still got his old one to sell to you..I think his radiator is still working...

[rocklobster]

hi guys i notice when im warming up my bike idling is very low, need to pull choke and throttle a bit if not will die.... my friend kick 1 time and engine can warm up without reving or pulling choke... my spark plug also just changed recently....

 

can i adjust my idling myself? or should consider going shop?

[MC28]

Adjust urself...Forgot where the idling knob is thou(Too long nv touch SP liaox...)

 

I think is a yellow knob on the left side under ur fuel tank..

[cliv]

hi guys i notice when im warming up my bike idling is very low, need to pull choke and throttle a bit if not will die.... my friend kick 1 time and engine can warm up without reving or pulling choke... my spark plug also just changed recently....

 

can i adjust my idling myself? or should consider going shop?

 

idling can be done by yourself if u know how to better take to shop and ask them to teach u b4 u do it yourself

[rocklobster]

so the reason why i have to pull choke and throttle when warming up is because my idling is too high or low?

[AkalaPovic]

Adjust urself...Forgot where the idling knob is thou(Too long nv touch SP liaox...)

 

I think is a yellow knob on the left side under ur fuel tank..

 

Its right side ah.. under the petrol tank got a flower shaped yellow knob.

[cliv]

so the reason why i have to pull choke and throttle when warming up is because my idling is too high or low?

 

ur engine is cold izzit normally ur idling is how much

[schwein.bissen]

Did it myself last time...

 

http://jbweld.net/products/jbweld.php

I can't find J-B Weld in Singapore ... Only Devcon, Araldite etc that fail under stress or when in contact with fuel

[MC28]

I can't find J-B Weld in Singapore ... Only Devcon, Araldite etc that fail under stress or when in contact with fuel

 

The last time i read up on radiator leaks in sbf, they couldnt find jb weld as well..

 

Which means the last alternative is to have it weld by shops..

[bobbykor]

Hello everyone!!

[hi_sham32]

Evening everyone...!

[iam1e5]

use this better,

http://obartpumps.co.uk/image/product/95.jpg

 

OR

 

this

 

http://img.diytrade.com/cdimg/74027/1708003/0/1211204730/Manual_Siphon_Pumps.jpg

 

want pump out your "current oil" before going JB ?

smart, hehe.

[ahduck]

Its right side ah.. under the petrol tank got a flower shaped yellow knob.

 

u sure still yellow colour. wat if colour fade?

[rocklobster]

ur engine is cold izzit normally ur idling is how much

 

Yeah it is cold start during morning 6 plus... But even still to have to pull choke and throttle everyday, is it normal?

[iam1e5]

Yeah it is cold start during morning 6 plus... But even still to have to pull choke and throttle everyday, is it normal?

normal la

can move can liao, dun care so much.

lol!

[rocklobster]

Ok I'll try to take on tha mentality more... First bike la so very sayang the bike...

[ahduck]

Yeah it is cold start during morning 6 plus... But even still to have to pull choke and throttle everyday, is it normal?

 

http://i116.photobucket.com/albums/o39/letoile_photos/more%20images/Apples.jpg

 

All have a common name apple

Colours, outlook, taste all different

But they are normal just like ur SP.

Even 2 brand new sp rides differently. needless to say its engine.

The choke is there for hard startups like urs. some dont need it.

Oh yeah the words in ur siggy dun come from me..