Kawasaki ZX10R Technicial Issue!

[ayuluv]

any bro tried tre for zx10r?? how is the review?

 

any one also happen to noe where can get headlight protectors, cf fuel cap protector, and cf yoke (triple tree) protector?? thnx =)

[myxilplix]

Originally posted by ayuluv@April 26, 2007 11:19 pm

any bro tried tre for zx10r?? how is the review?

 

any one also happen to noe where can get headlight protectors, cf fuel cap protector, and cf yoke (triple tree) protector?? thnx =)

Currently using the GiPro gear indicator+TRE. Some settings smoothen out the throttle response and others feel more punchy. But i've found my fuel economy drops, so now i run with no TRE setting.

[zhybrid]

Originally posted by ayuluv@April 26, 2007 11:19 pm

any bro tried tre for zx10r?? how is the review?

 

any one also happen to noe where can get headlight protectors, cf fuel cap protector, and cf yoke (triple tree) protector?? thnx =)

I have a set of headlight protectors and two double bubble to sell; one clear and one tinted. tinted one is zero gravity. the clear one i'm not sure but has excelent wind protection and great for track. the headlight protectors i have touched up by doing some grinding as it does not really fit when it came. if you don't mind maybe you can consider.

[ayuluv]

Originally posted by myxilplix@April 26, 2007 11:42 pm

Currently using the GiPro gear indicator+TRE. Some settings smoothen out the throttle response and others feel more punchy. But i've found my fuel economy drops, so now i run with no TRE setting.

oh... ok.. thnx =).. my fuel is ard 15km/l so far.. will try for sometime to c hw it goes =)

[ayuluv]

Originally posted by zhybrid@April 27, 2007 12:31 am

I have a set of headlight protectors and two double bubble to sell; one clear and one tinted. tinted one is zero gravity. the clear one i'm not sure but has excelent wind protection and great for track. the headlight protectors i have touched up by doing some grinding as it does not really fit when it came. if you don't mind maybe you can consider.

oh.. i juz got puig ones.. so far quite satisfied.. juz dat it short of the stock dotted design and kawa words...

 

how much will u be letting for for the headlight procs?? hope they are clear =)

[VoLcAnO]

Originally posted by ayuluv@April 27, 2007 09:58 am

oh... ok.. thnx =).. my fuel is ard 15km/l so far.. will try for sometime to c hw it goes =)

You got a 10r?? wad colour?

 

my Fc is ard 16km/h .. after installing a pc3..

[ninja10]

Hi guys,

 

My rear tyre (dunlop sportsmax 218) on my 05 zx10R is about to be changed. Need some feedback from you guys.

 

I am satisfied with the above stock dunlop sportsmax218 in terms of the grips (but it wears out very fact at the centre part).

 

Now, I am thinking of installing BT020. Is the grip of this BT020 as good as the stock Dunlop sportmax218?

I heard we can get better milliage on this BT020 compared wih the 218? Some says that the 218 is actually the same quality as BT014?

 

The kawasaki recomend to use Dunlop Qualifier as a substitite of the 218 (as 218 are not sold in shops). But, I do not want to install a tyre that wears out fast as the 218.

My current 218 only last abot 10000KM only. The sides are still very very good but the centre part...finnish liao....super flat already.

I am confused...

 

 

All your feedbacks are highly appreciated.

Tks

[suix]

Originally posted by ninja10@April 27, 2007 03:04 pm

Hi guys,

 

My rear tyre (dunlop sportsmax 218) on my 05 zx10R is about to be changed. Need some feedback from you guys.

 

I am satisfied with the above stock dunlop sportsmax218 in terms of the grips (but it wears out very fact at the centre part).

 

Now, I am thinking of installing BT020. Is the grip of this BT020 as good as the stock Dunlop sportmax218?

I heard we can get better milliage on this BT020 compared wih the 218? Some says that the 218 is actually the same quality as BT014?

 

The kawasaki recomend to use Dunlop Qualifier as a substitite of the 218 (as 218 are not sold in shops). But, I do not want to install a tyre that wears out fast as the 218.

My current 218 only last abot 10000KM only. The sides are still very very good but the centre part...finnish liao....super flat already.

I am confused...

 

 

All your feedbacks are highly appreciated.

Tks

My OEM Qualifier gave me 15000km with 1 track session. Served me well I should say for an OEM tire.

 

If you are looking at high mileage tire, I would recommend Michelin Pilot Sport. It is a very well balanced tire which provide solid mileage and grip on wet surface.

[myxilplix]

Can also consider the Diablo Corsa III, been hearing good reviews about it from the overseas guys.

 

In other news, i'm very happy my tires have lasted me more than 3 months, maybe can tahan another 1-2 months.

[ayuluv]

16 km/l for a litre bike is quite ok =) better den my raptor...

 

was tinkin abt pipe , damper den pc3.. heee...

 

bt 014 good for the 10??

[GerardSantaCruz]

Originally posted by ayuluv@April 28, 2007 12:50 am

16 km/l for a litre bike is quite ok =) better den my raptor...

 

was tinkin abt pipe , damper den pc3.. heee...

 

bt 014 good for the 10??

when wanna reveal ur new ride?

[VoLcAnO]

Originally posted by ayuluv@April 28, 2007 12:50 am

16 km/l for a litre bike is quite ok =) better den my raptor...

 

was tinkin abt pipe , damper den pc3.. heee...

 

bt 014 good for the 10??

My fren's 04 r1 CAN HIT 21KM/L..

 

I too changed pipe 1st , damper den pc.. ..

 

But its beta advisable to change brake hose and master pump 1st..

[VoLcAnO]

Originally posted by ninja10@April 27, 2007 03:04 pm

Hi guys,

 

My rear tyre (dunlop sportsmax 218) on my 05 zx10R is about to be changed. Need some feedback from you guys.

 

I am satisfied with the above stock dunlop sportsmax218 in terms of the grips (but it wears out very fact at the centre part).

 

Now, I am thinking of installing BT020. Is the grip of this BT020 as good as the stock Dunlop sportmax218?

I heard we can get better milliage on this BT020 compared wih the 218? Some says that the 218 is actually the same quality as BT014?

 

The kawasaki recomend to use Dunlop Qualifier as a substitite of the 218 (as 218 are not sold in shops). But, I do not want to install a tyre that wears out fast as the 218.

My current 218 only last abot 10000KM only. The sides are still very very good but the centre part...finnish liao....super flat already.

I am confused...

 

 

All your feedbacks are highly appreciated.

Tks

Dunlop alpha 10 ! long lasting and gd for track. Its even stable in the wet!

[ayuluv]

Originally posted by GerardSantaCruz@April 28, 2007 03:45 am

when wanna reveal ur new ride?

haha.. let nature take its course =)

[ayuluv]

Originally posted by VoLcAnO@April 28, 2007 09:34 am

My fren's 04 r1 CAN HIT 21KM/L..

 

I too changed pipe 1st , damper den pc.. ..

 

But its beta advisable to change brake hose and master pump 1st..

oic.. nvm la.. mayb dats kawa??

 

normally when getting class 2 bike ppl dun worry too much abt milleague.. =)

 

mv agusta has a quite bad milleague on paper itself.. actual ting am not dat sure.. ard 10km/l

 

master pump stock is not good enuff?? change to wat brand?

[ayuluv]

Originally posted by VoLcAnO@April 28, 2007 09:36 am

Dunlop alpha 10 ! long lasting and gd for track. Its even stable in the wet!

is it better den bt014??

cos my raptor uses one and it wears of kinda fast in the centre.. so is diablo corsa...

 

wat is the price for alpha 10??

[VoLcAnO]

Originally posted by ayuluv@April 28, 2007 09:59 am

is it better den bt014??

cos my raptor uses one and it wears of kinda fast in the centre.. so is diablo corsa...

 

wat is the price for alpha 10??

Personally i think tis much beta den 014.. Price is on the high side, i bought it at $540.

 

The stock master pump is kinda spongy .. normal ppl change to brembo, a cheaper option is to change it to R1 04's stock pump. Works great!

[ayuluv]

Originally posted by VoLcAnO@April 28, 2007 10:24 am

Personally i think tis much beta den 014.. Price is on the high side, i bought it at $540.

 

The stock master pump is kinda spongy .. normal ppl change to brembo, a cheaper option is to change it to R1 04's stock pump. Works great!

oic.. thnx for the feedback =)

 

how much is the brembo and the r1 stock pump price??

[VoLcAnO]

Originally posted by ayuluv@April 28, 2007 10:40 am

oic.. thnx for the feedback =)

 

how much is the brembo and the r1 stock pump price??

Motovation is selling brembo at 480 i think.. and i got the stock R1 pump for 200 including installation.

[ninja10]

Hi guys,

 

Tks for the input.

 

Guess the michelin pilot sport will be expensive compared with BT021?

 

Heard that BT021 is the latest version of 020. Heard good review from the manufacturer...ha..ha..hahh

 

Had anyone tested this 021? As long if the grip can be as good as the 218, then it's fine for me.

To buy diablo or michelin...no money liao. Money no enough. he..he..he.

[ayuluv]

Originally posted by VoLcAnO@April 28, 2007 10:45 am

Motovation is selling brembo at 480 i think.. and i got the stock R1 pump for 200 including installation.

oic.. but i like the look of oem pump leh.. hee.. black lever is nice!! hw does r1 pump looks like??

 

any place beside motoworld and ah boy to find head light protector for it?? cant seem to find...

 

looking for CF fuel cap and yoke pad too!!

[VoLcAnO]

Originally posted by ayuluv@April 28, 2007 12:04 pm

oic.. but i like the look of oem pump leh.. hee.. black lever is nice!! hw does r1 pump looks like??

 

any place beside motoworld and ah boy to find head light protector for it?? cant seem to find...

 

looking for CF fuel cap and yoke pad too!!

I sprayed my lever black. Its really hell of a diff dude.. R104/05/06's pump is actually brembo.

 

I dun think anywhere else sellin it.. Zhybrid sellin his right?

 

I also lookin for CF yoke pad but motoworld no stock..

 

[LimHammett]

any zx10r riders working at parkway parade or been to parkway parade for the past week..? i saw a zx10..a beaut man!! all black.. and i tink the owner moulded a new headfairing and a yoshi pipe with twin exits!

 

[zhybrid]

Originally posted by LimHammett@April 28, 2007 01:37 pm

any zx10r riders working at parkway parade or been to parkway parade for the past week..? i saw a zx10..a beaut man!! all black.. and i tink the owner moulded a new headfairing and a yoshi pipe with twin exits!

 

think you're talking about volcano....

[LimHammett]

Originally posted by zhybrid@April 28, 2007 01:59 pm

think you're talking about volcano....

come to tink of it.. the pipe looks exactly like the one in Volcano's signature!!

 

hahaha!