Oil filter opener

[RiddsRock]

Hi guys,

 

anyone know where to buy oil filter opener??

ah boi got sell not??

 

thanks..

[RiddsRock]

Hi guys,

 

anyone know where to buy oil filter opener??

ah boi got sell not??

 

thanks..

[jungleboy111]

Just go to any hardware shop, you should find the oil filter wrench.

[Guest sportster00]

Originally posted by RiddsRock@Jan 23 2005, 02:47 PM

Hi guys,

 

anyone know where to buy oil filter opener??

ah boi got sell not??

 

thanks..

Hi,

 

if you're refering to the round oil filter cap, try Ever success.

[lightspeed]

Originally posted by RiddsRock@Jan 23 2005, 02:47 PM

Hi guys,

 

anyone know where to buy oil filter opener??

ah boi got sell not??

 

thanks..

ah boi everything also got. i think his price ard 7. more than that i think chop price. but if your bargain skill good, maybe can get better. else buy oil filter with hex nut on the top (K&N oil filter). the wrench maybe will cause some accesibility problem, but depends on yr bike though

[IzPhotoWerkz]

They hardware shop beside Ah Boy got sell.

[boon21]

LAB got sell lah! I buy b4 but 4got how much!

[Guest motofreak]

Cost abt 4 or 5 onli..

[katana777]

LAB selling at $4

[cbkooky]

Originally posted by katana777@Feb 19 2005, 12:27 AM

LAB selling at $4

is this the one that cupsover the filter??or a wrench?

[cb1300]

make sure the "cupsover" type fit your oil filter

if not, get the wrench type.........

 

 

[Patrick Saul]

i got a oil filter chain wrench at mustafa at $8.40:smile:

[299]

Guys,how do u change our oil filter?

Completely drain out oil?

[cb1300]

not necessary..........

 

[299]

Originally posted by cb1300@Mar 21 2005, 11:51 PM

not necessary..........

 

if tat's the case,wat if when open the oil filter,got leftover oil starts pouring out?

[vfrT]

Only a small amount equivalent to that filled in the oil filter will drain out. Nevertheless, prepare a catchpan so as not to soil the floor.

The rest of the oil in the crankcase will have to be drain from the under belly of the crankcase via the usually 17mm oil drain nut.

[kazuhiko]

i realize that the oil filter cap opener which i bought is only for honda oil filter. Cos i have change to suzuki bike, the oil filter cap cannot fit in.

 

So anyone has any idea where to get the suzuki oil filter cap?

 

Thanks

[kazuhiko]

may i know where can i find oil filter cap for suzuki oil filter? thanks

[Demon]

i realize that the oil filter cap opener which i bought is only for honda oil filter. Cos i have change to suzuki bike, the oil filter cap cannot fit in.

 

So anyone has any idea where to get the suzuki oil filter cap?

 

Thanks

 

We are talking about the car-type. screw-on oil filter, and not the drop-in type, found on scramblers and smaller cc bikes.

 

Not all oil filter wrench will work because different vehicle has different space access allowance. So if the filter becomes too tight to remove, i just drive a screw-driver into side of filter body to turn it loose before unscrewing it out by hand.

 

When installing a new oil filter, it needs to be hand-tight only, using a wretch to tighten it may warp the rubber gasket. Another important step is to spread a few drops of fresh oil over the entire surface of the rubber gasket

 

[kazuhiko]

i found it at the hardware shop beside LAB, costs 10 bucks. There is a differences between honda oil filter cap n suzuki oil filter cap. There are no more stocks for suzuki oil filter cap at LAB. The size is 24.

[299]

i found it at the hardware shop beside LAB, costs 10 bucks. There is a differences between honda oil filter cap n suzuki oil filter cap. There are no more stocks for suzuki oil filter cap at LAB. The size is 24.

 

Can it be used on Yamaha bikes? Next time, we DIY EO plus oil filter together.

[mailkuro]

can someone tell me where is LAB ar?? Suzuki oil filter opener at ah boi sold out liao.

thanks in advance

[larree]

LAB = lim ah boy

so you might need to look out for it somewhere else