[CLOSED] SBF Yamaha X-1r 135

[Guest kasumi]

blackflys.... you try pm me again

[blackflys]

yes ah now ok already

[mild_slevin]

haha.... its impossible to clear meter with just this mod... you need lots of stuff to make it clear meter... even mine modded.... the meter never even touch the 170 mark.... and i think using gpr cannot really give the best power in clearing up the meter....

 

if you want to mod to clear meter... you need to change cdi, carb, air filter, piston, block, fast throttle, hi cam, stiff valve spring, and more you know.... think twice if you want to do.... cheers

 

Hmmm that's informative, actually how to overcome the problem where X-1R going incline slope with load. With the current stock condition, the engine response to my throttle kind of lag... despite persistently opening of throttle. The slope wasn't that steep some more.

 

For those parts u mention above, wat's the approximate cost?

[blackflys]

Hmmm that's informative, actually how to overcome the problem where X-1R going incline slope with load. With the current stock condition, the engine response to my throttle kind of lag... despite persistently opening of throttle. The slope wasn't that steep some more.

 

For those parts u mention above, wat's the approximate cost?

 

above price may cost u about 600 RM in JB..... for ur problem try to change sprocket.....

[sat0shii_keong]

above price may cost u about 600 RM in JB..... for ur problem try to change sprocket.....

 

 

sprocket change wat size for the front and rear?

any brand for the sprocket?

[blackflys]

hmmmm im using 15 37 with 428 chain.... stock sprocket will do just fine unless u carrying heavy load.... sorry....

[Guest kasumi]

sprocket change wat size for the front and rear?

any brand for the sprocket?

 

if i am not wrong, stock spocket is front 15 rear 39... i am using it now... i brought my sprocket and chain from sg ah boy... the brand of the sprocket is the sun brand and the brand of the chain is vorx 'gold chain'

[mild_slevin]

above price may cost u about 600 RM in JB..... for ur problem try to change sprocket.....

 

Thanks blackflys, so what sprocket size I should look into? Something smaller?

[Jasper514]

btw kasumi, wanted to asked u something but u left mac alr.

 

how much u change ur gpr exhaust pipe?

[sat0shii_keong]

hmmmm im using 15 37 with 428 chain.... stock sprocket will do just fine unless u carrying heavy load.... sorry....

 

oh okok.. thanks for the advice..

[blackflys]

if heavy load u need pick up so 15 ft 40 rr..... but usually stock sprocket shld be ok bro

[mild_slevin]

if heavy load u need pick up so 15 ft 40 rr..... but usually stock sprocket shld be ok bro

 

Cause usually I have pillion with me and box full of barang barang... tat's why I face such issue.

 

Thanks again blackflys for sharing, just any regular brand will do? Another thing if I were to change it would be front and rear or just rear will do?

[ZzGaNgStErzZ]

anyone here encounter a tiaking sound somewhere from middle to the rear. the sound comes every one full round the wheel rotates. tried parking on mainstand engage gear 1 to let the wheel roll, no sound. checked chain and sprockets good condition, used not even 1 mth 2 weeks to be exact(new bike). the sound only came when both the front and rear wheels is rotating on the ground and after the bike has gone a dist(not more than 2km)

[mild_slevin]

anyone here encounter a tiaking sound somewhere from middle to the rear. the sound comes every one full round the wheel rotates. tried parking on mainstand engage gear 1 to let the wheel roll, no sound. checked chain and sprockets good condition, used not even 1 mth 2 weeks to be exact(new bike). the sound only came when both the front and rear wheels is rotating on the ground and after the bike has gone a dist(not more than 2km)

 

I does experience the tiak tiak tiak, but I only experience it after I park my bike after riding. Its coming from the exhaust if I'm not wrong.

[ZzGaNgStErzZ]

I does experience the tiak tiak tiak, but I only experience it after I park my bike after riding. Its coming from the exhaust if I'm not wrong.

 

this i know, its the cooling of the exhaust, it applies to all big and small bikes.

but my tiaking sound is on the move.

[mild_slevin]

My stock exhaust mid pipe, some where close to the end can, I found a drilled hole. Exhaust puffing out when engine running is it OK?

[mild_slevin]

this i know, its the cooling of the exhaust, it applies to all big and small bikes.

but my tiaking sound is on the move.

 

Oops. Still thanks for sharing

[sat0shii_keong]

this i know, its the cooling of the exhaust, it applies to all big and small bikes.

but my tiaking sound is on the move.

 

is your chain guard the metal type or the orginal plastic type?

coz i heard from my fren the metal type will become loose after a period of time.. correct me if im wrong..

[kOpi_jaC]

My stock exhaust mid pipe, some where close to the end can, I found a drilled hole. Exhaust puffing out when engine running is it OK?

 

sounds not okay to me...

[Guest kasumi]

btw kasumi, wanted to asked u something but u left mac alr.

 

how much u change ur gpr exhaust pipe?

 

i brought it 2nd from from forum de... he sell me at 280, but after transfer fee and inspection. its around 380 lo.... the sliencer got mod before de... why? interester in getting 1 for your yourself ah? hee hee

[Guest kasumi]

My stock exhaust mid pipe, some where close to the end can, I found a drilled hole. Exhaust puffing out when engine running is it OK?

 

The hole will be there... in case got water go in to your pipe it will flow out from that hole

[mild_slevin]

The hole will be there... in case got water go in to your pipe it will flow out from that hole

 

Thanks kasumi for sharing

 

Actually I read alot of you guys mention about CDI, what is it? Something associate with kick start?

 

What impact can I expect from an aftermarket carb? I read Motoworld webbie, saw a Yoshimura underbone carb.

[ZzGaNgStErzZ]

is your chain guard the metal type or the orginal plastic type?

coz i heard from my fren the metal type will become loose after a period of time.. correct me if im wrong..

 

its the original kind, shall tighten my chain see if its ok. if not i shall check the bearings, thks anyway :cheeky:

[blackflys]

for all issues mention above... for sproket issue, change whole set front rear and chain to 15-40 428 for pick up.... for the tiak tiak sound ur chain loose.... as for the exhaust the drilled hole try to cover it up with size 10 nut.... not very long nut but a short one....

 

service package anyone? pm for deatils

[ZzGaNgStErzZ]

for all issues mention above... for sproket issue, change whole set front rear and chain to 15-40 428 for pick up.... for the tiak tiak sound ur chain loose.... as for the exhaust the drilled hole try to cover it up with size 10 nut.... not very long nut but a short one....

 

service package anyone? pm for deatils

 

wah, u 1 shot reply all, nv quote and reply the queries lucky i clever enuff to spot thks. i saw the "maybe mentioned hole" mine is with a nut attached (but dunno same hole a not)