[Group] YAMAHA RXZ

[justin0108]

Guys, im interested to get rxz, but what's the fc for a stock rxz? 1L about how many KM?

Mine is catalyzer stock condition..can go 35km/L..mostly travel on expressway 90+km/h

Some of the guys in the forum can go as low as 20+km/L..might depend on ur riding style on road condition ba..or maybe their bike heavily modded

[justin0108]

Help..some problem came up with my rxz..

first when im at a traffic light/stationary with engine running at gear 1..it seems hard to kick up to neutral..

lastly, when i start the bike, kick down to gear 1, engine dies on me..sometimes at traffic lights as well..

omg, any experts for advise for solution?

I do not want to be con by shops..

 

Think no need to go bike shop..sometimes even after changing oil will have a bit of difficulty kicking to neutral..that is quite a common problem..as Romi say..jus rev abit before kicking should solve it..sometimes mine rev also cannot..jus try to put the clutch to biting point and let bike move abit then kick to neutral can Liao.

As for your gear 1 then engine stall..mine will be like that in the morning if I didn't warm up the bike long enough..usually I rev abit before kicking to first gear in the morning..once the bike warm up I dnt have this problem..if your problem still persist then your idling rpm might be too low. There is a knob at the carburetor where you can adjust your idling rpm..mine is at 1

[Allen]

Mine is catalyzer stock condition..can go 35km/L..mostly travel on expressway 90+km/h

Some of the guys in the forum can go as low as 20+km/L..might depend on ur riding style on road condition ba..or maybe their bike heavily modded

 

I see.. One of the best fuel consumption for 2 stroker.

[LoudnessFz]

Think no need to go bike shop..sometimes even after changing oil will have a bit of difficulty kicking to neutral..that is quite a common problem..as Romi say..jus rev abit before kicking should solve it..sometimes mine rev also cannot..jus try to put the clutch to biting point and let bike move abit then kick to neutral can Liao.

As for your gear 1 then engine stall..mine will be like that in the morning if I didn't warm up the bike long enough..usually I rev abit before kicking to first gear in the morning..once the bike warm up I dnt have this problem..if your problem still persist then your idling rpm might be too low. There is a knob at the carburetor where you can adjust your idling rpm..mine is at 1

 

i think its mostly becoz clutch too near...and maybe chain loose might also affect it though im not so sure about this..but yeah i got the same prob recently also,after adjust biting point to a bit far and tighten chain..its ok already..didnt even touch the idling screw

[whensecretskill]

hi bros.aku ada masalah. just now was riding 120km/h from bke to kje.bila nk exit expressway je tutop throttle motor mati. aku tau tu seize.tunggu kejap.start balik boleh jalan. aku pakai mainjet 195 pilot standard.motor jepun tapi gearbox naik 6 speed.pakai main 210 minyak overflow.motor bobok.engine baru overhaul.da masok 2000km. block guna y4 size 0.75. ape pandangan kwn2?

[Problematic]

Justin0108 and Romi_Ku

Guys,I appreciate the advise thanks.. =)

[justin0108]

Justin0108 and Romi_Ku

Guys,I appreciate the advise thanks.. =)

 

No problem man..btw how old is your bike? Japan model?

[norsyahizzat]

izzat,kau dari malaysia tinggal singapore eh?or kau keje sini then alik malaysia hari2?

 

aku mmg kat malaysia je..takde masuk singapore...usha2 kat internet club2 yang ade...then terperasan website nie..tue yg join..saje nk tambah ilmu pengetahuan dan tambah kawan...harap korang leh beri tunjuk ajar:)

[norsyahizzat]

hehe. did you post here bro? sorry..

 

salam bro.

 

 

woooi.. cam best jew~.

 

mmg best pun bro..i just wondering...singopre rxz user..make up rxz mcm mane:)mane la tau dapat tambah pengetahuan ke..

[Problematic]

No problem man..btw how old is your bike? Japan model?

 

haha..20 over years..yup2 japan 6 speed..

[mazli]

wah so stuck up ah rxz pple now.. boyan where are u?? blurchaoz u do up your coverset already ah?

 

Salamz bro. i am hardly in here sal bz travelling to n fro jb gi kedai accessories beli spare parts for my rxs hondacub n rxz. btw since miss get a Z lah den we can go riding like last time

[mazli]

hye....salam perkenalan..im from malaysia...hope u all can accept me as your fren as im rxz user too:)

 

Wassalamz bro, welcome sal kite pun selalu gak gi malaysia jalan cari mkn, spare parts n isi minyak.

kalau ada facebook add me fazlisonic32@yahoo.com.sg or search rxzkers semua budak2 rxz ada

[mazli]

can help me get the suzuki panther needle? hehe

 

salamz bro, panther jarum baru RM$35 jek n d pilot RM$15 jek blum lagi workmanship, sg tk jual separately

[mazli]

Help..some problem came up with my rxz..

first when im at a traffic light/stationary with engine running at gear 1..it seems hard to kick up to neutral..

lastly, when i start the bike, kick down to gear 1, engine dies on me..sometimes at traffic lights as well..

omg, any experts for advise for solution?

I do not want to be con by shops..

 

i bro, eo sometimes it plays a part but if the prob still occurs i suggest u open the side cover whr ur kick start is n look at d clucht plate if its worn out or not if not den there is a small rod like screw in the middle turn tht rod clock wise or anti n try kick start it slowly n engage to gear 1 n back to neutral cuz it helps as the settting may hv shift abit due to wear n tear plus vibration

[mazli]

hi bros.aku ada masalah. just now was riding 120km/h from bke to kje.bila nk exit expressway je tutop throttle motor mati. aku tau tu seize.tunggu kejap.start balik boleh jalan. aku pakai mainjet 195 pilot standard.motor jepun tapi gearbox naik 6 speed.pakai main 210 minyak overflow.motor bobok.engine baru overhaul.da masok 2000km. block guna y4 size 0.75. ape pandangan kwn2?

 

Salamz bro, 195 tk bleh pakai unless pakai panther jarum n jet angin tiggi sikit lau seize kena tau gak 2t ada masuk ke tk sal a da 2t pump jam tu pun lau ko pakai pump lau tk den ur jetting cant used that

[gryphon]

yeah man..kau pernah try tk?

 

aku pipe2 haram smua tk brani pakai ah... haha... lepas ngok member aku kene saman $700, better playsafe ah...

kau nk tukar pipe tu peh??

[shoobs]

hi guys im new to rxz and wish to learn alot from you guys here (:

 

anyway i have a problem. somehow, when i open my throttle fully at gear 6, my rpm stuck at 7. cannot go any higher. =/ what can be the problem?

 

using sprocket size 16/40. i know for a fact my block is local. rgding the size i nt sure.

 

i was thinking maybe its the carbs settings.

 

 

clueless. anyway sorry if i interupt in the thread all of a sudden. hehe

[silverstein]

hello fellow Z riders, im helping a few friends to order Hel brakehose for RXZ tonight. Interested please sms/call me at 91832563. available colours are red, yellow, orange, blue, black. Price $55. the offer is for today only.. deposit to my bank account by tonight and will arrange for meet-up tomorrow evening. this offer is for today 4th APRIL 2011 only. later than that will not be entertained.

 

thank you.

[Problematic]

i bro, eo sometimes it plays a part but if the prob still occurs i suggest u open the side cover whr ur kick start is n look at d clucht plate if its worn out or not if not den there is a small rod like screw in the middle turn tht rod clock wise or anti n try kick start it slowly n engage to gear 1 n back to neutral cuz it helps as the settting may hv shift abit due to wear n tear plus vibration

 

ouh crap..this sounds like a mechanic work..I'm a total newbie and I'm lost about all the parts, how to undo and fix them back in..lol..

but thanks for the idea..might check in when i change engine oil next time..

[mazli]

hi guys im new to rxz and wish to learn alot from you guys here (:

 

anyway i have a problem. somehow, when i open my throttle fully at gear 6, my rpm stuck at 7. cannot go any higher. =/ what can be the problem?

 

using sprocket size 16/40. i know for a fact my block is local. rgding the size i nt sure.

 

i was thinking maybe its the carbs settings.

 

 

clueless. anyway sorry if i interupt in the thread all of a sudden. hehe

 

Hi bro, local block cannot go more than 120mkh i suggest u get an ori block den u can hv d torque, local block just throw it away

[LoudnessFz]

who wants to buy my loud silencer?for standard pipe it sounds sharp like bee...for internal pipe maybe can try n see if it gives bee sound..

 

its nice if u dunt wanna mod ur pipe but want the whack whack sound that u cant get on standard silencer..haha..price below 10 bucks

[blurchaoz]

Hi bro, local block cannot go more than 120mkh i suggest u get an ori block den u can hv d torque, local block just throw it away

 

Local block is it with the IMHO alphabet on the left side of the block instead of the 55G00?

[mazli]

Local block is it with the IMHO alphabet on the left side of the block instead of the 55G00?

 

Salamz bro, yup dats d one n the is also taiwan block too mostly all local blocks can nvr exceed 120kmh, even at full throttle but it will give u lots of smoke jus like fogging

[mazli]

Local block is it with the IMHO alphabet on the left side of the block instead of the 55G00?

 

Salamz bro, yup dats d one n the is also taiwan block too mostly all local blocks can nvr exceed 120kmh, even at full throttle but it will give u lots of smoke jus like fogging

[LoudnessFz]

unfortunately pat agent name united ape tah pat rowell..selling local block..die pon tak ckp local..$120 only