[Group] YAMAHA RXZ

[Rxz73]

Plate FV for rxz da scrap belum?intend to buy ori speedometer from scrap shop?

[DiNo4264]

ur using 15-37 and rpm7 on 100??whats ur rim size again..17" or 18?rpm7 capai 100 ni mau rabak ni...

 

Im also using 15F 37R. Naik slope memang rabak. Can hit 120km/h at RPM 7. So far top i tried can hit 160km/h at RPM 9. Never tried more than that.

Can anyone advice me on sprocket 15F 34R.

[DiNo4264]

ur using 15-37 and rpm7 on 100??whats ur rim size again..17" or 18?rpm7 capai 100 ni mau rabak ni...

 

Im also using 15F 37R. Naik slope memang rabak. Can hit 120km/h at RPM 7. So far top i tried can hit 160km/h at RPM 9. Never tried more than that.

Can anyone advice me on sprocket 15F 34R.

[CHINCHAO]

hi bros. anyone knows how to DIY clutch plate? i may need help(:

[CHINCHAO]

try bike shops area untie sticker shop.. but why would u need the manual???

 

cause i want to change clutch plate, DIY:)

[LoudnessFz]

.....................i suck.. :'(

 

btw anyone knows how long can my bike last like the wheels battery everything if i just leave it there stationary?

 

battery not sure..aiya rxz no need battery also can move..make sure if u nvr use ur bike or even warm it up for a week..when u wanna use warm it up properly..and if can go at the rubbish chute then start ur bike..can do some fogging..heheh

 

Bro..if im using spocket 16-38 is it possible?currently using 15-39 bila bwk meter 120-130km/h boleh bukak lagi tapi engine mcm stress after gear 6..mayb u all tau ape masalah selain dari tukar spocket?any advised bro syam or sewaktu dgnnya?hahaha

 

rim 17 or 18?15-39 rabak bro..engine meraung..but are u a top speed devil or not?if not pakai je spoket ni..kalau slalu blast2 top speed nk try dgn org..kalau taknak tuka spoket gak..carb setting mesti bagus..2t mesti cukup..den most prob takkan piston jam..only that with time ur crankshaft will wear out faster...conrod longgar..and all sorts of stuffs that leads to overhauling..all these comes slowly..

 

if not then have to change sprocket la..if u like to ride more than 130km/h die2 have to change sprocket..if not engine rpm everytime almost hit redzone buey tahan..even 4 stroke also might get some damage..apa lagi 2 stroke??

 

Im also using 15F 37R. Naik slope memang rabak. Can hit 120km/h at RPM 7. So far top i tried can hit 160km/h at RPM 9. Never tried more than that.

Can anyone advice me on sprocket 15F 34R.

 

wah seh..34 ah?this one top speed not stress of course..but pickup stress like hell..guys..dont think ur engine never go redline that means ur bike not stress..dont think use small2 sprocket top speed can achieve while not doing any damage to ur engine...

 

in reality we accelerate more than we cruise,when we use smaller sprockets and suffer in acceleration,we open throttle more,and the engine needs to work harder to pull the rear wheels,this also equates to loading stress.and also suffer loss in extra fuel to accelerate.totally not efficient.

 

maybe small bike will not be as obvious,but with bigger bikes ull see drastic changes in fuel consumption just by sprocket ratio alone due to heavier loads the engine needs to bear.

 

thats why i recommended 17/42 due to its balance in pickup and average top speed(hitting 120-140km/h without going near the redline) as ive tried it myself,go up slope also can maintain gear 6,maybe open up the throttle a bit more only.

 

bro instead of decreasing the rear teeth..try increase the front instead..16-38,at 120km/h ur rpm should be at about 6.5-6.8,16-39 will be 7.1-7.2,provided ur engine,carb,pipe is standard n using 17" rim.

[LoudnessFz]

btw anyone experience any reed valve problems before?i need to know the symptoms..bobok or what?

[Rxz73]

Bro,rim 18....jarang main top speed.tapi kadang2 da lmbt or saja nak kejar members..so ape spocket yg sesuai?weight aku pun around 58-60kg.aku tanak engine meraung ah

[velocity325]

 

battery not sure..aiya rxz no need battery also can move..make sure if u nvr use ur bike or even warm it up for a week..when u wanna use warm it up properly..and if can go at the rubbish chute then start ur bike..can do some fogging..heheh

 

 

hmmm..i just scared tyre kinda melt..cause i entering ns soon ....then bro, you know why when i open throttle, like got one air sound, the hissing sound, coming from under my seat..i removed my sit and throttle a little, got one very very funny and cute hisssssss, hissssss...

[LoudnessFz]

Bro,rim 18....jarang main top speed.tapi kadang2 da lmbt or saja nak kejar members..so ape spocket yg sesuai?weight aku pun around 58-60kg.aku tanak engine meraung ah

 

rim 18 den 15-39 engine meraung2 eh..if u can provide me the rpm when it hits 120-130km/h gear 6 is better..tell me 100km/h rpm apa,120km/h rpm apa,from here i can somehow estimate how much rpm increase when the speed increases..den maybe i can give a better suggestion.

[LoudnessFz]

hmmm..i just scared tyre kinda melt..cause i entering ns soon ....then bro, you know why when i open throttle, like got one air sound, the hissing sound, coming from under my seat..i removed my sit and throttle a little, got one very very funny and cute hisssssss, hissssss...

 

u scared tyre melt?huh?oh u park at open carpark isit?

 

suction sound isit?i think its coming from the airbox la...u see beside the 2t compartment got rectangular hole not?if not rectangular,then something that looks like a chimney,an elephant nose..that one airbox bro..other than that i could think of nothing that produces hiss hiss sound......wait.......u keep snake under ur seat ah??

[ajal05]

Bros how much doed overhaul engine in jb cost?the mech told me its ard 900..how eh?

Just now change engine oil..the colour gt white2..like metal flakes or something..like that must overhaul is it?

Hais..

[ajal05]

Bros how much doed overhaul engine in jb cost?the mech told me its ard 900..how eh?

Just now change engine oil..the colour gt white2..like metal flakes or something..like that must overhaul is it?

Hais..

[velocity325]

u scared tyre melt?huh?oh u park at open carpark isit?

 

suction sound isit?i think its coming from the airbox la...u see beside the 2t compartment got rectangular hole not?if not rectangular,then something that looks like a chimney,an elephant nose..that one airbox bro..other than that i could think of nothing that produces hiss hiss sound......wait.......u keep snake under ur seat ah??

 

mscp..hhaaahahaas...ohhhh..suction sound yea..no snake laaa..hahas..normal uhs? last time don't have one,,,

 

edit one : this one means air box dirty is it..?or airbox got hole...lol!!

[LoudnessFz]

mscp..hhaaahahaas...ohhhh..suction sound yea..no snake laaa..hahas..normal uhs? last time don't have one,,,

 

edit one : this one means air box dirty is it..?or airbox got hole...lol!!

 

how come u scared tyre melt sia..u using cadbury brand tyres ah?hahaha..tyres wont easily melt one la..not as if singapore is 100degrees celcius..

 

no la airbox not dirty,i think the chimney i talked about u dunt have already..thats why the sound more obvious..can just leave the bike..no worries..u can start after u come back from confinement..just be ready of fogging..this one i love the most..hahaha

[velocity325]

how come u scared tyre melt sia..u using cadbury brand tyres ah?hahaha..tyres wont easily melt one la..not as if singapore is 100degrees celcius..

 

no la airbox not dirty,i think the chimney i talked about u dunt have already..thats why the sound more obvious..can just leave the bike..no worries..u can start after u come back from confinement..just be ready of fogging..this one i love the most..hahaha

 

HAHAHAHAHA , okay , thanks ahh!!

[Rxz73]

rim 18 den 15-39 engine meraung2 eh..if u can provide me the rpm when it hits 120-130km/h gear 6 is better..tell me 100km/h rpm apa,120km/h rpm apa,from here i can somehow estimate how much rpm increase when the speed increases..den maybe i can give a better suggestion.

 

 

100km/h rpm 6....bila 120-130km/h rpm 8.The problem is meter local ni? So maybe not accurate!!!motor masih boleh pegi but engine meraung.

[velocity325]

my 5 speed , 100 rpm 5.5, 120 rpm 6.5..but must drag at lower gears to get this..or if accelerate normal 100 already at 7..how is my combination..?

[LoudnessFz]

100km/h rpm 6....bila 120-130km/h rpm 8.The problem is meter local ni? So maybe not accurate!!!motor masih boleh pegi but engine meraung.

 

alamak meter local eh..parah ni...hmm..but kalau 120-130 rpm 8 already..next is 9..after that redline...rabak bro rabak..go up one tooth at the front and one down at the back...16-38 maybe..this should give about the same as 15-35,but better..when u hit 120 rpm should be about less than 7?

 

p.s: calculation aku may or may not be accurate..so try at ur own risk..coz its ur money..haha..but to my best of knowledge..it should be somewhat there..

[LoudnessFz]

my 5 speed , 100 rpm 5.5, 120 rpm 6.5..but must drag at lower gears to get this..or if accelerate normal 100 already at 7..how is my combination..?

 

i uh..dont understand..first 100 rpm 5.5 then 100 rpm 7?err..are both at ur last gear?

[velocity325]

yea...if like i sleepy sleepy , just ride out, upshift very fast, later last gear hard to go high speed..but if i drag and drag, last gear, can revv lower to get into the high speed range..like either a chocked up pipe or crab..but my pipe is new, carb just washed..

[Rxz73]

alamak meter local eh..parah ni...hmm..but kalau 120-130 rpm 8 already..next is 9..after that redline...rabak bro rabak..go up one tooth at the front and one down at the back...16-38 maybe..this should give about the same as 15-35,but better..when u hit 120 rpm should be about less than 7?

 

p.s: calculation aku may or may not be accurate..so try at ur own risk..coz its ur money..haha..but to m

y best of knowledge..it should be somewhat there..

 

So i stick 16-38 ah...itu yg aku mention at page 537 .

[syamitomo]

btw anyone experience any reed valve problems before?i need to know the symptoms..bobok or what?

 

If reed valve dsnt close properly, definitely bobok. If pecah, cnnt start bike coz u "choked" the bike wif too much air intake...

 

Bro,rim 18....jarang main top speed.tapi kadang2 da lmbt or saja nak kejar members..so ape spocket yg sesuai?weight aku pun around 58-60kg.aku tanak engine meraung ah

 

15f 38r sudah... Both end ada, tak meraung sgt...

 

hmmm..i just scared tyre kinda melt..cause i entering ns soon ....then bro, you know why when i open throttle, like got one air sound, the hissing sound, coming from under my seat..i removed my sit and throttle a little, got one very very funny and cute hisssssss, hissssss...

 

Tat wld b ur airbox. Like wat Loudness explained, it's under the seat. Ur tyre won't melt, even under hot sun. Unless u ride without any exhaust, then ur front tyre will melt...

 

Bros how much doed overhaul engine in jb cost?the mech told me its ard 900..how eh?

Just now change engine oil..the colour gt white2..like metal flakes or something..like that must overhaul is it?

Hais..

 

It means water somehow leaked into ur engine oil... Better solve tis prob asap bro...

[neez]

bros you all know whr can weld back pipe? my pipe endcan part drop off sia.. and need urgently (agar agar how much ah?)

[LoudnessFz]

bros you all know whr can weld back pipe? my pipe endcan part drop off sia.. and need urgently (agar agar how much ah?)

 

endcan part drop off...like i heard this story somewhere before...u use octane booster ah??hahaha...luckily ur endcan never get crush by a lorry behind...hehehe..

 

p.s: i remember who story was this..bwahaha