[Group] YAMAHA RXZ

[bloodybaguz]

Originally posted by slaxz@Oct 2 2005, 11:47 AM

for me is my fault. thought that i could pass the lorry but when i did, it was too late. the divider was a few metres away. couldn't brake fast. lucky was travelling at slow speed. if not

next time be careful went riding

[Hockz]

Hey sorry guy ask again JB ABOY is at the aqua lane that road but furter up rite...

[FrdAuZ]

Hi..gd morning Guys..

 

Got questions to ask...

 

Send shop to spray whole bike 1 color roughly how much? Is it better to DIY?? Scared turn out ugly ah.. And ah..TZM fast throttle how much? Is daytona fats throttle good?Thinking of changing to Daytona fast throttle...

 

Btw i saw some rxz their Spokes are lime green in color...was wondering is it they spray their spokes or available at shops?..Any bros got info? Kindly reply... or sms me at 91084086 (Firdaus)..

[RexZ]

Hello All,

 

Sorry to hear about your accident slaxz and bloodybaguz. But it's good to hear you are both safe and well. Bike can be replaced so not too worry.

 

I also want to say Thanks a bunch to our bro Adyra to patiently wait for me when I overhaul the engine at JB last Saturday. Now I'm running in the engine and can't go fast.....yet. It's difficult coz the engine now wants to run

[ErwanT.P]

yO guyS wassUp?... i'm reali neW at thiS site... and i came across u guys discussin bOut rXz... i myself ride an rXz its the reD one in my Signature... the other tWo arE my besT fwens bike... actualOo.. mY byke has changed alot since this pic was taken i'll update u guyS soon enuff... i changed to rim 17 both front is 80/80 and back is 80/90 the rim is black and the spoke is Gold and i sprayed the hub(both) gold i added a damper.. and absorbers... i boust a new black catalyzer.. the back fering i mean... and i guess thats it... i've been so blessed to have bought the byke fer 1600 mac price and the total is 2189(rnd off fig) its a n FQ still got 3 years of COE.. the onli prob i have is the when riding the vibrations can reali tick me off... btw i wanted to ask... is it good to have more holes on the brake dics?? cause i haven got any holes on mine... and it heats up fast.. another prob is that my front brake is gettin harder to pull in is it due to brake fluid???? do reply soon thnks...

[slaxz]

thanks for your concern. sent my bike for repair. told them to check alignment, fork and cone bearing. they told me that my fork need to be pressed and handle bar need to be changed and some other things. they qoute me ard 180 inclusive of towing service. is there any other things that i need to check.

[bloodybaguz]

Originally posted by RexZ@Oct 3 2005, 11:31 AM

Hello All,

 

Sorry to hear about your accident slaxz and bloodybaguz. But it's good to hear you are both safe and well. Bike can be replaced so not too worry.

 

I also want to say Thanks a bunch to our bro Adyra to patiently wait for me when I overhaul the engine at JB last Saturday. Now I'm running in the engine and can't go fast.....yet. It's difficult coz the engine now wants to run

thkz for ur concern.

running in kapee.....

how much u overhaul in JB?

:smile:

[slaxz]

i've been thinkin of respraying my tank to ori red. ask one shop in yew tee and they told me $80. anyone knows cheaper place???

[faris]

Originally posted by mat-vtech@Oct 2 2005, 12:48 AM

im not sure wat is the width but my sport rim is the original one wif the word yamaha rxz on it..i kinda like it koz of the chrome sides n the 3 sticks are sprayed in black..im also using tzm fast throttle..however my clutch n brake levers are the original ones..nah,i have yet to see the adjustable type but thanks 4 the info..i look it up one day..btw,wat do u mean by carbon fibre printed chainguard?does it mean dat the original chainguard can also be printed wif the carbon fibre?4 my suspensions,im using the long n hard chrome type,cheap n nice..hehe,my handle bar is original..i juz noticed today after changing to 80/80,that my rear wheel looks nice however my front wheel looks awkward..like bigger than my rear one..i operated my pipe n initially sounds nice,like a bee..but after some time,its getting louder n i hate it..u guys know y?my packing is juz 1 month old..

you use yellow packing or white packing? white packing is better. make it 2 packet. yellow packing wont last long.

[faris]

Originally posted by slaxz@Oct 3 2005, 11:15 PM

been wanting to respray my tank to ori red. a shop qoute me $80 anyone go better price???

$90 in singapore you can get a new tank. RM175 you can get a new tank in jb.

[faris]

Originally posted by mat-vtech@Oct 1 2005, 03:12 AM

thanks 4 the info adyra..i juz changed to TT900 80/80 at jb ah boy..definately looks nicer than my previous TT100..anyway u guys wanna share on wat acessories u have on ur bikes?im running out of ideas on how to make my RXZ more 'wancheng'..so far i have a 18'' sprt rim,the 3 stick type,fast throttle and balancer..was thinking on fixing tzm tank cap but no enouff money yet..do u guys use the short brake n clutch lever?was also planning to get one but saw from a fren's bike that it just dun sit nicely and like dangling or loose so afraid might give me problems..any one knows wat brand and where to get a gd one?

the short and adjustable ones wont work they sucks! i recommend you to use brembo brake lever comes with the brake fluid bottle and have a brembo logo on it. for the clutch try to use original ones. they fit nicely.

[faris]

Originally posted by Firdaus@Oct 3 2005, 09:01 AM

 

Send shop to spray whole bike 1 color roughly how much? Is it better to DIY?? TZM fast throttle how much? Is daytona fats throttle good?Thinking of changing to Daytona fast throttle...

 

Btw i saw some rxz their Spokes are lime green in color...was wondering is it they spray their spokes or available at shops?..Any bros got info? Kindly reply... or sms me at 91084086 (Firdaus)..

tzm i think cost around rm80. tzm is better than daytona. if yor daytona cable snap you have to buy the whoe think again cos they dont sell daytona cables. correct me if i'am wrong.yes lumines green looks nice. but nice comes with a price. mine last time last for only 2 weeks and 2 spokes broke! the nipples will rust very fast. u must take care and tune it properly. chrome more better lah. send shop spray better diy spray wont work. if u want to spray red. yellow. black better buy a full set fairing. much more cheaper than spraying.

[faris]

Originally posted by slaxz@Oct 3 2005, 02:55 PM

thanks for your concern. sent my bike for repair. told them to check alignment, fork and cone bearing. they told me that my fork need to be pressed and handle bar need to be changed and some other things. they qoute me ard 180 inclusive of towing service. is there any other things that i need to check.

bro repressing your folk does not work. this is a small bike and light bike. wont better stable. it will just hits 80% or 90% it wont get to a 100% better go jb change the folk inner tube and thats it. oh dont forget to use tapered bearings.

[faris]

hey who wanna go out gathering? lets meet each other leh

[faris]

Originally posted by adyra@Sep 23 2005, 06:21 AM

13 litre i tink so. if u go hong leong yamaha webby they got state.

mine no reserve switch so cant keep track on the FC. if im not mistaken reading it somewhere the petrol consumption is 32km/litre

what tha F***? my bike is 10km/litre.

[RexZ]

Full top overhaul in JB cost RM155. Overbore a bit, change new piston and rings, gaskets, clean carb, etc.

Decarbonize, cut pipe, new packing and silencer: RM95.

G-power Plug: RM15

Motul Trans Oil: RM26

 

Now bike runs like a dream but can't go above 80km/hr yet until I reach 1000km.

Anybody use a different Reed Valve? Any difference? How about NGK wires? NGK wires cost RM45.

 

Faris, where you can get the brembo brake thing with bottle and how much? My brake pump giving me problems.

[Danny-]

Hi dudes, i've a Aprilia Brake Pump(Brembo) + Aprilia Brake Caliper for sale. Selling on a first come first serve basis. Do pm me if u're interested.

[slaxz]

just gotten my bike. it seems stable but when i let go my hand, the bike move slightly to the right. anyone knows wat's the prob...

another thing, wat's folk inner tube and tapered bearing and how much does it cost in jb???

[mat-vtech]

Originally posted by faris@Oct 4 2005, 03:16 AM

you use yellow packing or white packing? white packing is better. make it 2 packet. yellow packing wont last long.

if im not wrong,mine is yellow..anyway thanks for the reply bro.

[mat-vtech]

Originally posted by faris@Oct 4 2005, 03:22 AM

the short and adjustable ones wont work they sucks! i recommend you to use brembo brake lever comes with the brake fluid bottle and have a brembo logo on it. for the clutch try to use original ones. they fit nicely.

where to get it?so i guess nobody have any idea where to get the short type of lever which is really good ya?

[faris]

i'am not sure how much the brembo brake lever cost. u can get it at zul bike shop at jb before the small shell station on the left handside. inner folk tube cost cheap but i'am not sure how much. bearings cost rm80. more better than original.

[faris]

silicon spark plug cable is very good. the bike feel powefull after 7 or 8 rpm.

[Danny-]

Originally posted by faris@Oct 4 2005, 03:22 AM

the short and adjustable ones wont work they sucks! i recommend you to use brembo brake lever comes with the brake fluid bottle and have a brembo logo on it. for the clutch try to use original ones. they fit nicely.

I've it..its the brembo brake pump. Anyone interested pls pm me as i'm selling it together with the aprilia brake caliper.

[faris]

how much?

[Danny-]

Originally posted by faris@Oct 5 2005, 03:37 AM

how much?

Going for $120nett for the pump + caliper.