[Group] YAMAHA RXZ

[hotbladerz]

No lah, ur welcomed to the "Goyang-goyang" Club!!! Hahaha...

U gonna remove the main stand? Wat for bro? Just send ur bike for welding only to solve the prob. Susah tau to cuci bike once u removed the main stand. How u wanna polish tat chrome rim of urs???

 

Speakin of washin bike.....

Tak ajak nampak!!!

Tak ajak nampak!!!

(Paiseh eh, use A'an's trademark... Hehe...)

 

"Goyang-goyang club" lah plak! Hahahaha!

OK. So, i go welding lah.

Usually takes how long for welding?? How much will usual bikeshop charge?

[syamitomo]

"Goyang-goyang club" lah plak! Hahahaha!

OK. So, i go welding lah.

Usually takes how long for welding?? How much will usual bikeshop charge?

 

Hehe... I don't know? Depend on which shop u go I guess and how they calculate for the sweat they shed....

[hotbladerz]

Hehe... I don't know? Depend on which shop u go I guess and how they calculate for the sweat they shed....

 

hehehe.. ok.. anyway thanks bro! selamat berbuka!

[Kutrax]

yo brudders need ur help..

 

how much do u tink the value of a FJ plate Rxz coe ending 2011?

need ur advise coz tinking off selling spare bike.

i know nuts abt the current value of rxz.

[hotbladerz]

yo brudders need ur help..

 

how much do u tink the value of a FJ plate Rxz coe ending 2011?

need ur advise coz tinking off selling spare bike.

i know nuts abt the current value of rxz.

 

I think should be $1k & below..

I'm not pretty sure..

I guess so..

Heee~ maybe others can help..

[SparkerS1]

Yeah, nice to finally see a more experienced Zecker!!!

i newbie ar, need to learn from u guys alot:goodluck:

how much do u tink the value of a FJ plate Rxz coe ending 2011?

need ur advise coz tinking off selling spare bike.

i know nuts abt the current value of rxz.

 

need to know which block n pipe u using, engine condition? tires condition?

if wanna sell can, around $600-800 depending on condition

[Kutrax]

 

need to know which block n pipe u using, engine condition? tires condition?

if wanna sell can, around $600-800 depending on condition

 

I think should be $1k & below..

I'm not pretty sure..

I guess so..

Heee~ maybe others can help..

 

 

tenkiu brudder..

i tink 800 is reasonable la.

 

i see garage sale people selling so ex.. i scared i sell too expensive later kena shoot.

[Guest }VIRUS{]

I've find out quite sometime ago. The answer is . . . . YES TO ALL !!! When putting on the main stand, I shake from side to side & it's LEANING, BUTT SHAKE, DANCE SHAKE!!

 

Hahaha. But erm... Excuse me, which club am I welcomed??

SHAKY Club???

haha. In that case, probably remove the main stand lah..

& use Side stand only.

So... Everyday when parking my bike, it will be leaning.. Much more than the Leaning Tower of Pisa!!

 

PLEASE DUN TAKE OUT UR MAINSTAND!!!

hahaha...serious bro dun take it out...

u gonna regret taking it out just like me...

mine oso same case like urs..

mainstand senget oredi..

aft take out i regret sia..

someplaces u park mainstand is more safer den sidestand..

wid mainstand,when u park ur bike it consumes lesser space den leaning ur bike on sidestand.

i checked it out to attached my mainstand back wid a new mainstand+welding is 50bux at wing yap amk.

at l.a.b(johor) is 75rm welding+new chrome mainstand.

was told it took an average of abt 3hrs to do it uh..

anyway i've not done it yet...

hehehe...got other stuff more important to do tings to do 1st...

 

*(HOPE DIS INFO IS OF HELP TO EVERYONE HERE)*

[A-AN 07]

PLEASE DUN TAKE OUT UR MAINSTAND!!!

hahaha...serious bro dun take it out...

u gonna regret taking it out just like me...

mine oso same case like urs..

mainstand senget oredi..

aft take out i regret sia..

someplaces u park mainstand is more safer den sidestand..

wid mainstand,when u park ur bike it consumes lesser space den leaning ur bike on sidestand.

i checked it out to attached my mainstand back wid a new mainstand+welding is 50bux at wing yap amk.

at l.a.b(johor) is 75rm welding+new chrome mainstand.

was told it took an average of abt 3hrs to do it uh..

anyway i've not done it yet...

hehehe...got other stuff more important to do tings to do 1st...

 

*(HOPE DIS INFO IS OF HELP TO EVERYONE HERE)*

Ya, strongly agree with your statement bro. I myself soon gonna fix main stand for my sayang... Hehe....

[Guest }VIRUS{]

tenkiu brudder..

i tink 800 is reasonable la.

 

i see garage sale people selling so ex.. i scared i sell too expensive later kena shoot.

 

one of my fren sold his rxz fj plate coe left less den a yr shop take in 400 bux only..

my rxz FS plate wid y3 block n coe till apr 2010,shop 1k oso dun want to take..

got this shop called teo spray painting even better nvr see my bike,i juz told him my plate n coe,he offer me 400..

lucky i not studip...

i changed my mind abt selling my rxz...

planning to keep it for another 10yrs...

hehehe....

[Guest }VIRUS{]

Wah i new page...

anyway guys i gotta some tings to ask u guys lah...

As u all noe my z is FS plate wid Y3 block.

everything is standard n my block haf been rebored to .75 uh i tink.my spocket is 15/36.my rims r 18in.my tires also standard.top speed i've tried is 140km/h,my fc is abt 300km/full tank b4 reserve.

so if lets say i haf RM1000,wad can i do wid my bike?

1stly: i wanna change 17inch(~rm220) rim wid tt900(~rm170)

2ndly: i wanna rewire my whole bike(i dunno d cost)

aft that i dunno wad else shud i do to my bike in order for me to haf good pick up,good top speed(=

i also need to change to a new set of gantung n conebearing.

the rest that is not of top piority is like new coverset,new main+side stand, new ignition,new fast throttle,new fork n etc...

so i hope those expireng people out there can help me breakdown how n where to spend my RM1000 on my baby....

[Guest }VIRUS{]

sowie for the multi postings...

[Guest }VIRUS{]

sowie for the multi postings...

[hotbladerz]

PLEASE DUN TAKE OUT UR MAINSTAND!!!

hahaha...serious bro dun take it out...

u gonna regret taking it out just like me...

mine oso same case like urs..

mainstand senget oredi..

aft take out i regret sia..

someplaces u park mainstand is more safer den sidestand..

wid mainstand,when u park ur bike it consumes lesser space den leaning ur bike on sidestand.

i checked it out to attached my mainstand back wid a new mainstand+welding is 50bux at wing yap amk.

at l.a.b(johor) is 75rm welding+new chrome mainstand.

was told it took an average of abt 3hrs to do it uh..

anyway i've not done it yet...

hehehe...got other stuff more important to do tings to do 1st...

 

*(HOPE DIS INFO IS OF HELP TO EVERYONE HERE)*

 

Ya, strongly agree with your statement bro. I myself soon gonna fix main stand for my sayang... Hehe....

 

haha! thanks a lot bros!! hehehe. 50 bucks at wing yap amk is it?

huhu.. ok. thanks for the info!! :thumb:

[bloodybaguz]

GUD MONIIINGGG......

[estadio21]

hi all, i need to ask...hmm wads the best sprocket combo to use if im usin 17inch tyres for my RXZ...im looking for good top-end...is 15-38 ok? im not very sure...

[blurchaoz]

hi all, i need to ask...hmm wads the best sprocket combo to use if im usin 17inch tyres for my RXZ...im looking for good top-end...is 15-38 ok? im not very sure...

 

im using 15-38 but on 18 inch tyres. so far acheived 160km/h. not sure wat top end speed you can achieve on 17 inch.

[A-AN 07]

hi all, i need to ask...hmm wads the best sprocket combo to use if im usin 17inch tyres for my RXZ...im looking for good top-end...is 15-38 ok? im not very sure...

Please not that with 17 inch rims, minyak teruk bro.. Better consider. Aniwae, stay 18 ok what. Maybe you want to rempit i guess, hehe...

[Guest }VIRUS{]

Please not that with 17 inch rims, minyak teruk bro.. Better consider. Aniwae, stay 18 ok what. Maybe you want to rempit i guess, hehe...

 

wah bro tanx uh for the info..i didnt noe sia useing 17'' rim minyak rabak...

was juz about to change to 17'' end of the mth sia...bt i oso wana rempit...18'' rims can rempit or not uh?

[PHILIP79]

VIRUS where u stay???? U been to Malaysia to repair ur bike before????

[PHILIP79]

My bike shop qutoe me 15 bucks for bringing my bike for inspection excluding the incpection fee... Is this ex??

[Guest }VIRUS{]

VIRUS where u stay???? U been to Malaysia to repair ur bike before????

 

i stay serangoon nth...very often i go j.b...i nvr repair bike there but mostly is servicing and buy accs...

i used to frequent the shop called ramesh along ah gua lane there...recently went to L.A.B jb to do servicing and most often for minor2 stuff like 2t n service carb i go to hyper shop just b4 shell...

why uh:confused:

[Odaka]

bro how much uh u spray n how long?which shopp?

bro add me on msn [email protected]

 

k bro dah add n dah reply kau nye pm:angel:

[PHILIP79]

Oic. I tot of getting ppl accompany to Malaysia lor... I am newbie...

[A-AN 07]

My bike shop qutoe me 15 bucks for bringing my bike for inspection excluding the incpection fee... Is this ex??

For me quite cheap & safe you from alot of hassle. Btw, i heard people say if bike shop send for you sure pass the inspection. Affordable what the price, maybe you want to consider??

 

wah bro tanx uh for the info..i didnt noe sia useing 17'' rim minyak rabak...

was juz about to change to 17'' end of the mth sia...bt i oso wana rempit...18'' rims can rempit or not uh?

That is base on my experience lah, last time using 17 petrol consumption teruk. Then change back to 18 slightly better. Who says 18 cannot rempit??? It depends on rider and not the bike. You can ask Syamitomo, he rempit you can cry siah. In regardsless of tyre & rims size, he also can proceed Hehehe.....

 

Oic. I tot of getting ppl accompany to Malaysia lor... I am newbie...

Plan a day, create a list here then we see how's the support will be. Don't mind going with you, but must see lah you want to go which day...