[Group] YAMAHA RXZ

[aishaan]

u wanna fly....how fast ?

Good question. At least faster den my fastest now without damaging my bikey. Btw how fast cn your Z go?

[A-AN 07]

Don't wan, u just make up an untrue story out of me....

It's ok if you cannot help me, i will find another person to help me grant my wish:sian:

 

its gd to hear dat 1 of ur dream bike but hope wen u upgrade u dnt sell ur rxz lah like me ..haha

oh ok..sorry to both of u..my bad..hehe 1 day i blanja both of u kopi k..

a'an..pls dnt deny u r oready install it..ok wat..sama2 ada lampu..ahakz

SINDIH NAMPAK, SINDIH NAMPAK!!!

Where got deny, what light??? I good boy always comply to LTA ruling, unlike you. Hehehe:)

 

Afternoon Zeckers!!! Passing by here~ vrooooooomm~!! oupz.. Got new Gantry at PIE Eunos exit!! DAMN~!

Standby cash card Macha!!!! Don't be suprised that nowdays, certain carpark already required you to use cash card. One day, while entering your MAMAK shop also must place cash card in your pocket. Hahahahaha!!!!!!!

 

Hey there RXZ members!

First time posting here.

Btw i have a question for those rxz pros here.

I wanna make my rxz bike fly faster. Now my top speed only 110km/h.

N i see other rxz fly faster without over revving their bike.

May i know wat must i do to my bike to aquire faster speeds?

Thanks in advance guys.

Welcome to the club bro!!!!!! If you want to fly, just fully mod your bike lah, sure TERBANG.... But RXZ are meant for transport lah bro, what for you want to mod here mod there....

[aishaan]

Welcome to the club bro!!!!!! If you want to fly, just fully mod your bike lah, sure TERBANG.... But RXZ are meant for transport lah bro, what for you want to mod here mod there....[/b]

hey there new found fren. I dun wanna fully mod coz later waste money & and waste fuel. Just wanna up my top speed to at least 130km/h i happy liao. hehe. Have any suggestions? i quite new to all these mods. I only just here these terms but dunno which shop to go to. Porting, Jetting, Tuning, Bigger Carb, etc.

[PHILIP79]

Evening everyone...

[PHILIP79]

Anybody interested to join me for petrol topup this Tuesday 14/10/2008 morning around 9am to 10am via 1st link??? Kindly post your interest here, thanks...

 

 

SOrry I can not make it cos working...

[PHILIP79]

need help ..me bike cannot ideling...y ah!!!haiya....

 

Get to the bike shop to check lor....

[PHILIP79]

Welcome to the club bro!!!!!! If you want to fly, just fully mod your bike lah, sure TERBANG.... But RXZ are meant for transport lah bro, what for you want to mod here mod there....[/b]

hey there new found fren. I dun wanna fully mod coz later waste money & and waste fuel. Just wanna up my top speed to at least 130km/h i happy liao. hehe. Have any suggestions? i quite new to all these mods. I only just here these terms but dunno which shop to go to. Porting, Jetting, Tuning, Bigger Carb, etc.

 

Better not mod until ur RXZ goes to waste.

[PHILIP79]

Hope that my bike can go overhaul by end of the year...

[PHILIP79]

Who else going for the 28-30th NOV Weekend Bikers Week?

[PHILIP79]

I want the new page....

[PHILIP79]

SO Sad no new pages meh...

[PHILIP79]

What the hell man!!!!! Supposed to polish my endcan but forgotten to bring my Brasso to work.. Damm!!!!!!!! There goes my Sunday mood....

 

Dun be sad la...

 

AnyOne Heading to The SGP Flyer for SBF ANNIVERSARY 2008

28-30 Nov 2008

 

http://www.singaporebikes.com/forums/showthread.php?t=209276

 

I working on 2 days dun think can make it...

 

me n wifey gg..

 

Cool man...

 

scared i cannot go, see how, maybe a few hours nia

 

Hey there RXZ members!

First time posting here.

Btw i have a question for those rxz pros here.

I wanna make my rxz bike fly faster. Now my top speed only 110km/h.

N i see other rxz fly faster without over revving their bike.

May i know wat must i do to my bike to aquire faster speeds?

Thanks in advance guys.

 

Enjoy within the speed will do...

 

110km/h, depends on how you change gear also.

throttle fully still 110km/h?

 

SO Sad no new pages meh...

 

Will I get it?????????

[SparkerS1]

110km/h and my rpm arnd 7k plus. any more then my bike got funny feeling. After dat dont dare open throttle anymore. Coz scared bike spoil or wat.

usually is like that, vibration also become stronger

 

Will I get it?????????

u got it:angel:

[A-AN 07]

hey there new found fren. I dun wanna fully mod coz later waste money & and waste fuel. Just wanna up my top speed to at least 130km/h i happy liao. hehe. Have any suggestions? i quite new to all these mods. I only just here these terms but dunno which shop to go to. Porting, Jetting, Tuning, Bigger Carb, etc.

Try mod your pipe first, get the feel of it. If still greedy for more speed, move further to rebore your block... But rebore your block will consume slightly more petrol.

 

Evening everyone...

Evening to you bro.....

 

SOrry I can not make it cos working...

It's ok, i understand... Will be heading with Pendek...

 

Hope that my bike can go overhaul by end of the year...

All the best.....

 

Who else going for the 28-30th NOV Weekend Bikers Week?

Not sure, check with the rest. Myself maybe not going....

 

I want the new page....

You got it already bro.....

 

scared i cannot go, see how, maybe a few hours nia

You like celebrity what, hard to see you. Hehe...

[aishaan]

may i know where is the best place to mod pipe?

if msia shop cheaper den its better.

but will i get caught by TP if pipe too loud?

[uma-man]

110km/h and my rpm arnd 7k plus. any more then my bike got funny feeling. After dat dont dare open throttle anymore. Coz scared bike spoil or wat.

Last time before change sprocket cn go 100km/h only. more sadder. =P

 

bro..no need fully mod also can up ur speed..u go n port ur carb n block..setting must be good..then play with ur sprockets can oredi..

 

me standard carb also can clear meter..last tym i use 16-38(now 15-37 cause top speed dun have ah thats why down one size), 428 chain(heavier than current 415 i'm using) and 17" rims with a width of 2.15 (now use sotong)...furthermore carb n pipe standard..can clear meter..

[A-AN 07]

PHILIP79 - Do you know that the date you took out your bike stated on your siggy really mean alot to me???

[SparkerS1]

You like celebrity what, hard to see you. Hehe...

 

busy bro, haizzz, how i wish i got some free time to slack:faint:

[uma-man]

bro..i want to emphasize again here..i'm not saying that my bike gd lah..can go vr fast lah..but i just want to share coz i feel like no need to waste a lot of money to change this n that..no need to mod pipe ah..nowadays where got rxz use pipe open anymore..got lah but not a lot..zaman finish already lah bro..then attract the attention of tp summore..just like tinted visor..its hard to find nowadays..

[aishaan]

bro..no need fully mod also can up ur speed..u go n port ur carb n block..setting must be good..then play with ur sprockets can oredi..

 

me standard carb also can clear meter..last tym i use 16-38(now 15-37 cause top speed dun have ah thats why down one size), 428 chain(heavier than current 415 i'm using) and 17" rims with a width of 2.15 (now use sotong)...furthermore carb n pipe standard..can clear meter..

 

wah can clear meter. so good ar. hehe. i envy you man.

btw you know which shop cn do all those things( port carb and setting )?

dont think wanna port my block coz scared my bike eat fuel too much.

[A-AN 07]

busy bro, haizzz, how i wish i got some free time to slack:faint:

Take MC and slack with us lah:angel:

 

may i know where is the best place to mod pipe?

if msia shop cheaper den its better.

but will i get caught by TP if pipe too loud?

Proceed to Lorong Bapok in JB, there is a few shop to choose. Which shop to recommend maybe some of us here can recomend you. Once you tempered with your pipe consider illegal already, no need to say further.

 

bro..no need fully mod also can up ur speed..u go n port ur carb n block..setting must be good..then play with ur sprockets can oredi..

 

me standard carb also can clear meter..last tym i use 16-38(now 15-37 cause top speed dun have ah thats why down one size), 428 chain(heavier than current 415 i'm using) and 17" rims with a width of 2.15 (now use sotong)...furthermore carb n pipe standard..can clear meter..

Fuyoooo, MAT REMPIT talk already.. Hehehehe.....

[don25]

halo there.. first tyme here

whats the range of prices for these items at JB, hope u guys cn help me..

- change cone bearing

-fork oil seal + spring (service)

-chain + sprocket

-handle clip ori

-kickstarter

-brake pump with brake light

-brake caliper stock

-clutch system

-overhaul

-dunlop tyre

[blurchaoz]

- change cone bearing

-fork oil seal + spring (service)

-chain + sprocket = 120RM for a RK gold chain 415 size

-handle clip ori

-kickstarter

-brake pump with brake light= brake pump original 220RM like dat.

-brake caliper stock

-clutch system= if your talking about clutch plate original 120RM without EO

-overhaul= down engine around 700RM- 800RM

-dunlop tyre= tt900 85RM a piece.

[syamitomo]

its gd to hear dat 1 of ur dream bike but hope wen u upgrade u dnt sell ur rxz lah like me ..haha

oh ok..sorry to both of u..my bad..hehe 1 day i blanja both of u kopi k..

 

Hahaha.. Don't worry, I'll only upgrade to a bigger bike when I hav the financial and means to upgrade AS WELL as to keep my 1st bike!!!

 

Kopi? Nah... I wan u to teman me go PG one day. Hahahaha...

 

Afternoon Zeckers!!! Passing by here~ vrooooooomm~!! oupz.. Got new Gantry at PIE Eunos exit!! DAMN~!

 

Yeah, was abt to post it up here. I mean, WAT"S UP WIT TAT?!!!! Crazy sia.......

 

need help ..me bike cannot ideling...y ah!!!haiya....

 

Ur bike cannot idle? Maybe u haven't start the bike even! Hahaha... Just kiddin, u did explain to me abt ur probs rite yest nite? Sori but the whole traffic marshal thingy ends late, so no way I'm gonna go knockin on ur door ard 1am to ask abt ur bike prob rite? hee.. Just call me up again ait then see if ur not busy to come over my place...... AND ALSO TO GET UR STUFF!!!!

 

(Btw, did u manage to down ur fork and change the bolt???)

 

Hey there RXZ members!

First time posting here.

Btw i have a question for those rxz pros here.

I wanna make my rxz bike fly faster. Now my top speed only 110km/h.

N i see other rxz fly faster without over revving their bike.

May i know wat must i do to my bike to aquire faster speeds?

Thanks in advance guys.

 

I'm wondering how they make their bike fly without over revving their bike? Maybe should just jump off a bridge at 30km/h. Hehehe... Just kidding. Anyway, Welcome to the club bro. I guess u get some replies already but tis is my point anyway, I think some Zs are built differently, meanin tat how they perform from other stock Z may vary. Eg, my Z is very heavy and needs to go to 5000rpm to maintain 100km/h and top speed is 140km/h(while it is stock mind u) whereas my wife's Z is quite light & agile, only need to go 3500~4000rpm to maintain at 100km/h and top speed is 160km/h. The catch is both bike is "FE" plate, born in the same year(1985), same bored Y1 block & piston and both hav the same 5 gear and sprocket set. Tat is wat I found out from my lil' experiement so as for ur info....

[syamitomo]

wah can clear meter. so good ar. hehe. i envy you man.

btw you know which shop cn do all those things( port carb and setting )?

dont think wanna port my block coz scared my bike eat fuel too much.

 

Actually, any portin or changes of settin done to ur bike will change ur bike's performance and ur fuel consumption. I suggest u do a top overhaulin first and see the bike performance first. Then from ther, u will know ur real bike performance and see wat's lackin.

 

Plus even if ur bike did clear meter, doesn't neccessarily means ur bike can fly! U need to see how the portin is bein done and any polishin is bein done so as to ensure smooth flow of the angin u know. And ultimately, u need to know how to play ur gear! Tat's wat me and A'An find out last time from our lil drag last time. Betul tak abg A'An???? Hehehehehe.....

 

(But now cannot already, port as much as u wan, his bike wancheng already!!!)