[Group] YAMAHA RXZ

[blurchaoz]

hi guyz..any1 one where can find lemang pipe..??

dented oso can..but nt until jialat ah..

and oso where can mod da pipe in sg..??

scrapyard bro. or u can try asking the mechanic at shops if they happen to have any. theres one shop behind my house area asking $60 or $80 i cant remember uh.

 

YO! how you guys doing? the NATO master is back!

 

lame seh tak log in. laptop buat bnyk hal da.

(eng sub: its been a while since i last sign in. Laptop creating problems for me! :stupid big smiley face: )

so when your KRR 150 coming out bro?? or ur already riding one??

[Dino85]

Aik? Thought u alrdy hav Mr Who's kosong pipe alrdy? Why the sudden urge to go lemang???

 

i where got take his pipe..?? i was happy wif my internal pipe then..

few mth ltr my pipe bocor liao..so now using standard pipe..

but quite happy wif da performance coz i dun realli speed tat much nowadays..

[Dino85]

scrapyard bro. or u can try asking the mechanic at shops if they happen to have any. theres one shop behind my house area asking $60 or $80 i cant remember uh.

 

da one near teck whye or near sungei kadut..??

there can mod oso..??

[mankuro]

hi.. i think its my block problem.. anyone knw where i can get new/used block at a low price? tanx..

[rx115]

@mankuro bro its not block prob ur bike is in running condition and it will end up after 1500 km aprox.... dont worry

[Dino85]

hi.. i think its my block problem.. anyone knw where i can get new/used block at a low price? tanx..

 

u jz rebore ur block wat..how can b da block prob..

i suggest u try and use standard pipe and den try ur bike..

if ur bike runs ok, den its ur pipe prob..

if its not ok, i still got dis feeling ur carbs da prob..

try washing ur carbs n reseting ur carbs..

sumtimes ur main jetting n ur air jetting in ur carbs doesn't work in wateva condition tat it is having rite now..

 

remember tat i'm no expert..i advising u based on experience only..

ask the other experts in this thread..they might hv a better solution for u..

gd luck bro..

[syamitomo]

tanx bro.. any idea where is the best place i cn get it check?

 

Just go to ur nearby bike shop should be fine. If u really2 wan the best place, JB is the haven to be for 2-strokes!!!

 

i where got take his pipe..?? i was happy wif my internal pipe then..

few mth ltr my pipe bocor liao..so now using standard pipe..

but quite happy wif da performance coz i dun realli speed tat much nowadays..

 

Oh is it? I didn't know... Then why don't u just mend the pipe then???

 

da one near teck whye or near sungei kadut..??

there can mod oso..??

 

Bro, scrapyard lah bro, a place where u dispose off unwanted stuff. In tis case, motorcycles. How the apek2 wan to mod the pipes?!

 

Anyway, u can also try out at Tractor Rd and Pioneer Rd too!!!

[syamitomo]

hi.. i think its my block problem.. anyone knw where i can get new/used block at a low price? tanx..

 

Cannot be since u just said u just got ur block rebored. I suspect it's the "done up" pipe tat u just got lah... Ur pipe decarbonised already or not? And see the tengkok of ur pipe, is it bigger than standard one? Finally check ur main/pilot jets, might be wrong setting...

 

Btw, try tis... On an open road, try revving ur bike all the way on ur last gear till the bike like wan to die like tat. Then drop down 1(or2) gear, see if ur bike can go anot. But only for a short distance k? And pls on an open road. Do update how it goes here k?

[PHILIP79]

Anyway if u guys don't know, Caltex has just introduced their very own Octane 92 pump, wif Techron!!! So for those of u who always wanted to hav Techron in their but always find it a bit steep to pump in 95 can hav their wishes come true wif the cheaper alternative!!! Hee...

 

Let me know the result of this new petrol that u pumped...

[PHILIP79]

1st Post for the brand new day of 21st March 2009.....

Guys enjoy ur dinner tonight as I will be attending to my wife's relative wedding dinner too....

Cheers

[AhGui]

Philip, join us after ur dinner tml?

[blurchaoz]

Philip, join us after ur dinner tml?

 

where got tmrw?? today already mah...

cant wait to makan...

[syamitomo]

Let me know the result of this new petrol that u pumped...

 

All I can say is................................................................................... it feels like any other fuel; no diff. Heh heh heh...

 

1st Post for the brand new day of 21st March 2009.....

Guys enjoy ur dinner tonight as I will be attending to my wife's relative wedding dinner too....

Cheers

 

Ya guys, enjoy ur dinner tonite coz don't think I can join u guys aft some unforeseen circumstances happened to me the last 2 days. Haiz... Those whom I called, sounding like a lost kitten and very desperate at the same time:pity:, should know the prob alrdy. Been riding my bicycle to work eversince then... Hehe...

 

But nevertheless, I'll try to make it tis evenin, if not for the dinner maybe for the event after dinner I guess. (Was supposed to get it fixed up last nite but apparently I couldn't wake up after my supposedly "short nap") Unless someone got 415 chain to spare, I guess I'll be cycling and (die)trying to beat u guys on drags......

 

Philip, join us after ur dinner tml?

 

Trust me, u don't wan to hav a drunk rider following a group tis big...

[Dino85]

Oh is it? I didn't know... Then why don't u just mend the pipe then???

 

i wan 2 keep 1 standard pipe ah..jz in case..

[Dino85]

Let me know the result of this new petrol that u pumped...

 

been usin caltex gold for the past 1 yr until it was faced out..

got a shock when i open up my block for servicing 6 mth ago..

my piston n block got far2 less carbon than normal..

this is aft 1 yr of not servicing my block..

i can say ard 90% less carbon..

aft afew mth of usage, i can feel tat my bike runs smoother n abit more powerful..

got better throttle response oso..

i highly recommend caltex 2 u all..

there's a caltex opp da sports complex near ur house wat Phillip79..

tats where i top my my petrol oso..

[mankuro]

Cannot be since u just said u just got ur block rebored. I suspect it's the "done up" pipe tat u just got lah... Ur pipe decarbonised already or not? And see the tengkok of ur pipe, is it bigger than standard one? Finally check ur main/pilot jets, might be wrong setting...

 

Btw, try tis... On an open road, try revving ur bike all the way on ur last gear till the bike like wan to die like tat. Then drop down 1(or2) gear, see if ur bike can go anot. But only for a short distance k? And pls on an open road. Do update how it goes here k?

 

hai.. i went to a machanic shop at pasir ris.. spc dere.. the uncle say i might kena tipu by my old machanic who "rebore" my bike.. he sae piston sieze.. cn hear the piston knocking on my block.. i was shocked!! feel lyk wan to bakar the old machanic's workshop.. he sae can rebore for me at 120.. or if i wan to change block, he cn do for $280(plus korek siket) dunno wat it means.. so.. should i juz rebore or change block? since 1 of my block nut tread is worn..

Edited March 21, 2009 by mankuro

[syamitomo]

hai.. i went to a machanic shop at pasir ris.. spc dere.. the uncle say i might kena tipu by my old machanic who "rebore" my bike.. he sae piston sieze.. cn hear the piston knocking on my block.. i was shocked!! feel lyk wan to bakar the old machanic's workshop.. he sae can rebore for me at 120.. or if i wan to change block, he cn do for $280(plus korek siket) dunno wat it means.. so.. should i juz rebore or change block? since 1 of my block nut tread is worn..

 

Hmmm... Maybe u should go back to ur old mech and make him rebore ur block for free!!! Make kecoh2 @ his workshop...

 

If 280, u gotta know wat wat ur paying for 1st, Y1? Y2? Y3? Y4? Wat if he said he korek the block but doesn't? Or worst, a block tat alrdy spoilt due to overly ported tat perform even worst? More importantly if it's a 2nd block, wat size is the piston and is he gonna put in local or original piston set...

 

Ur block tiang can be mend again, so is the reboring of ur block. Think u better compare ur block wif the other block he's gonna give u before deciding. If u wan to change block, make sure u bring back the old one and make it as a spare...

[mankuro]

Hmmm... Maybe u should go back to ur old mech and make him rebore ur block for free!!! Make kecoh2 @ his workshop...

 

If 280, u gotta know wat wat ur paying for 1st, Y1? Y2? Y3? Y4? Wat if he said he korek the block but doesn't? Or worst, a block tat alrdy spoilt due to overly ported tat perform even worst? More importantly if it's a 2nd block, wat size is the piston and is he gonna put in local or original piston set...

 

Ur block tiang can be mend again, so is the reboring of ur block. Think u better compare ur block wif the other block he's gonna give u before deciding. If u wan to change block, make sure u bring back the old one and make it as a spare...

 

hey.. tanx bro 4 ur advise..tat tym i ask its a y1 block.. 1 owner.. my fren change his block dere.. he is was y2.. changed to y4.. n can reach 160 easily.. tried his bike.. it was smooth.. haiz.. but wan to change block pon no money.. btw wats good about koreking block?

 

btw.. heard sum1 looking for lemang pipe.. i got lobang.. cost 120.. biken redi.. mechanic sae pipe not noisy until u open ur throttle..

[AhGui]

Thanks guys and gals for supporting and making history... har har har...

[blurchaoz]

btw wats good about koreking block?

 

btw.. heard sum1 looking for lemang pipe.. i got lobang.. cost 120.. biken redi.. mechanic sae pipe not noisy until u open ur throttle..

 

when you korek something surely shiok macha... wakakaka!

 

lemang $120 to me expensive bro. firstly you got a done up pipe which you donnoe what had been done to it in the first place. second thing your pipe done up but your engine stock. the only not noisy pipe lemang is the stock ones. but those that are done up already might be silent when idling but u open throttle abit its like a bee.

 

btw to all the macha's out there thanks for making the whole event happen.

sorry for misleading you guys also. when i was suppose to wait for the tzm guys to lead the way.

[CoRnEr7]

to all da fellow rxz members who came for da reunion....

 

CHEERS!!!

 

may there be more gatherings & meet-ups in da future.

ride safe guyz.

 

wandee.

[Engineer]

A Token Of Appreciation to all who turned up Last night for YAMAHA RXZ_TZM

Re-Union Dinner.Well Firstly i would like to apologise for any wrong-doings i've made last nite n yeah i guess its all

human-errors..anyway...thanks a lot!!

 

 

1)Pendek

2)Fai90

3)Ah GUi

4)Sakai

5)Mon

6)Chin

7)Vespa_Boy

8)A-an07 & Co.

9)Blurchaoz & GF

10)Yazid & GF

11)AdieSufyan & GF

12)MaverickRD & GF

 

And For Dos Who Turned Up After Dinner,Thanks For Yur Support!-

 

1)Philip79 & Wifey

2)Syamitomo & Wifey

3)Daddy Fiesta & Wifey

4)MR.Who & GF

5)Dino85 & GF

 

And Of CoS,Not Forgeting D TZM Clan Members Who made Da Event Happening! hope we can haf Plans for future Gatherings~

 

 

UPDATED Pictures & Videos (http://rxzlovers.ning.com/profile/RXZ)

 

CHECK IT OUT!

[PHILIP79]

been usin caltex gold for the past 1 yr until it was faced out..

got a shock when i open up my block for servicing 6 mth ago..

my piston n block got far2 less carbon than normal..

this is aft 1 yr of not servicing my block..

i can say ard 90% less carbon..

aft afew mth of usage, i can feel tat my bike runs smoother n abit more powerful..

got better throttle response oso..

i highly recommend caltex 2 u all..

there's a caltex opp da sports complex near ur house wat Phillip79..

tats where i top my my petrol oso..

 

Ok... I pumped Clatex in Malaysia in future...

 

Thanks guys and gals for supporting and making history... har har har...

 

Ya... Ya... Ya...

 

to all da fellow rxz members who came for da reunion....

 

CHEERS!!!

 

may there be more gatherings & meet-ups in da future.

ride safe guyz.

 

wandee.

 

Cool...

[Ruzaini]

A Token Of Appreciation to all who turned up Last night for YAMAHA RXZ_TZM

Re-Union Dinner.Well Firstly i would like to apologise for any wrong-doings i've made last nite n yeah i guess its all

human-errors..anyway...thanks a lot!!

 

 

1)Pendek

2)Fai90

3)Ah GUi

4)Sakai

5)Mon

6)Chin

7)Vespa_Boy

8)A-an07 & Co.

9)Blurchaoz & GF

10)Yazid & GF

11)AdieSufyan & GF

12)MaverickRD & GF

 

And For Dos Who Turned Up After Dinner,Thanks For Yur Support!-

 

1)Philip79 & Wifey

2)Syamitomo & Wifey

3)Daddy Fiesta & Wifey

4)MR.Who & GF

5)Dino85 & GF

 

And Of CoS,Not Forgeting D TZM Clan Members Who made Da Event Happening! hope we can haf Plans for future Gatherings~

 

 

UPDATED Pictures & Videos (http://rxzlovers.ning.com/profile/RXZ)

 

CHECK IT OUT!

 

Vespa_Boy eh kene..

takpelah...

anw a million thanks to everyone who turned up..

[mrbk100]

yooo~~ wassup felloww clan-nerss.. hope u guys are in tip to the top condition..