[Group] YAMAHA RXZ

[A-AN 07]

good morning a-an! now my turn untuk tempohi 11 hours of werk. woohoo! confirm badan capek!!!....

Hahahaha, jangan inginkan yg bukan2 sudah:cheeky:

[blurchaoz]

Hahahaha, jangan inginkan yg bukan2 sudah:cheeky:

 

cuace tgh sejuk mane bole tak inginkan ape2??

[Dino85]

cuace tgh sejuk mane bole tak inginkan ape2??

 

wats wif cold weather..??

kalau sejuk mesti inginkan sesuatu.. haha

my werk place oso got ppl wif same prob...

 

Yesterday pendek n mave go sentosa wash eyes bo chio leh.. hahaha

[2strokeONWER]

helo peeps....wah so bored lah...my bike start to give prob readi...

2day ride to bbdc alot of smoke from the pipe lucky no uncle...

Rebore block n new piston $150 worth it tk? Wah cant buy pipe readi...

haha....

[mrbk100]

Ek eleh, si MENGARUT nie.... Post ask lah about people health or what....

 

k la. eh Aan, cam sihat? CONROD DA SERBIS ?! hahahaha~

[blurchaoz]

helo peeps....wah so bored lah...my bike start to give prob readi...

2day ride to bbdc alot of smoke from the pipe lucky no uncle...

Rebore block n new piston $150 worth it tk? Wah cant buy pipe readi...

haha....

 

wat you doing at bbdc?? staying around west uh?? btw tats a hot spot for uncle to wait infront bbdc...

tats a discount tag price bro... diy price will be around less then $60.

[blurchaoz]

k la. eh Aan, cam sihat? CONROD DA SERBIS ?! hahahaha~

 

dia tgh tunggu kau tonggeng lepas tu masukkn daging conrod dia PB.

[mrbk100]

dia tgh tunggu kau tonggeng lepas tu masukkn daging conrod dia PB.

 

sorry skit.tak dapat. lol.. blakang aku akan v forever n ever.kasi abang thai sane ah settle kuang kuang kuang..

[LoudnessFz]

helo peeps....wah so bored lah...my bike start to give prob readi...

2day ride to bbdc alot of smoke from the pipe lucky no uncle...

Rebore block n new piston $150 worth it tk? Wah cant buy pipe readi...

haha....

 

150?like sheet lor...i just bought piston,gasket and pin bearing...all for just $39.5,not including rebore and havent install.having it rebored and install...do u think itll reach $150??BULLSHEET AH ALL THESE BIKESHOP fckknnccb..wanna kok ppl of money only...i felt like showing the receipt to bikeshop siah...fook them lah

[krusty28]

hey u guys. im riding rxz y3 block. i tink my conrod is spoiled or loose cos at rpm 5, its pick up is abit slow. and when i stop and at neutral, its as thou some metal part inside is shaking. idk if its the conrod or piston ring. any ideas?

[mankuro]

150?like sheet lor...i just bought piston,gasket and pin bearing...all for just $39.5,not including rebore and havent install.having it rebored and install...do u think itll reach $150??BULLSHEET AH ALL THESE BIKESHOP fckknnccb..wanna kok ppl of money only...i felt like showing the receipt to bikeshop siah...fook them lah

 

$39.50 oni? walaowei!!!! freaking _()*$_*&&(@&^&* bike shop want to charge me for $150!!! but izzit ori piston or local 1? if ori den i rather dimyself.. my piston size is 0.50 nw.. so wat piston size should i get? n where to get? any 1 can teman me? im having that knocking sound oso.. but ive overhaul my engine.. conrod changed to new ori 1.. my engine oso start to vibrate alot more.. does that mean my block scratch? n my 2t move slowly even ive open it almost to the max.. HAIYA!! BANYK PE PROB MOTO AKU!! STRESS!!!:giddy:

Otais out dere.. i need advise plz.. thank you alot lot lot lot lot..

[vtec88]

RXZ meter for sale...interested PM me

(white paper type,new design one)

[blurchaoz]

hey u guys. im riding rxz y3 block. i tink my conrod is spoiled or loose cos at rpm 5, its pick up is abit slow. and when i stop and at neutral, its as thou some metal part inside is shaking. idk if its the conrod or piston ring. any ideas?

 

the easiest way to know if your conrod is loose without any experience. try this method... go to any shop ask them to do up the carb setting for you.. if they rev2 your bike and say that they cant do the setting for you then it means your conrod shake uh shake uh... hehe then they will start open discount tag price listing the cost of full overhaul.. haha

 

if you listen properly it must have been from the right hand side of the bike. this is due to wear and tear of the bike. the sound actually comes from your clutch housing becos it starts to get loose after a long usage.... when sometime you clutch in the noise disappear or gets a little softer. this is very normal for any rxz.

[Dino85]

$39.50 oni? walaowei!!!! freaking _()*$_*&&(@&^&* bike shop want to charge me for $150!!! but izzit ori piston or local 1? if ori den i rather dimyself.. my piston size is 0.50 nw.. so wat piston size should i get? n where to get? any 1 can teman me? im having that knocking sound oso.. but ive overhaul my engine.. conrod changed to new ori 1.. my engine oso start to vibrate alot more.. does that mean my block scratch? n my 2t move slowly even ive open it almost to the max.. HAIYA!! BANYK PE PROB MOTO AKU!! STRESS!!!:giddy:

Otais out dere.. i need advise plz.. thank you alot lot lot lot lot..

 

bro, which bike shop u go dok..?? u live where..??

$150 is ok 4 me coz come wif labour, piston, gasket, reboring etc etc..

anw usually normal servicing cost ard $70( if u nvr change anythin other than ur gasket)

so $150, ok pe dok..

in short, u can ride w/o prob..

anw i not otai ah..jz speaking based on my little experience..

now i wanna watch fast n furious 4 on da net k...tata

[blurchaoz]

bro, which bike shop u go dok..?? u live where..??

$150 is ok 4 me coz come wif labour, piston, gasket, reboring etc etc..

anw usually normal servicing cost ard $70( if u nvr change anythin other than ur gasket)

so $150, ok pe dok..

in short, u can ride w/o prob..

anw i not otai ah..jz speaking based on my little experience..

now i wanna watch fast n furious 4 on da net k...tata

 

tolak the url sekali uh! i mendak at werk...

[mankuro]

bro, which bike shop u go dok..?? u live where..??

$150 is ok 4 me coz come wif labour, piston, gasket, reboring etc etc..

anw usually normal servicing cost ard $70( if u nvr change anythin other than ur gasket)

so $150, ok pe dok..

in short, u can ride w/o prob..

anw i not otai ah..jz speaking based on my little experience..

now i wanna watch fast n furious 4 on da net k...tata

 

ouhk.. tanx den bro for the advice.. preciate it..

 

btw.. im staying in bedok..!

[Dino85]

tolak the url sekali uh! i mendak at werk...

 

go to http://www.movie6.net

mcm-mcm ada dok..

[Dino85]

ouhk.. tanx den bro for the advice.. preciate it..

 

btw.. im staying in bedok..!

 

no problemo..

jauh siak bedok dgn bbdc...

[yinghai]

go first motor ask them mould for you hayabusa fairings put on your rxz..

[A-AN 07]

cuace tgh sejuk mane bole tak inginkan ape2??

Ya betolz, for sure the vain start to berdenyut-denyut:cheeky:

 

wats wif cold weather..??

kalau sejuk mesti inginkan sesuatu.. haha

my werk place oso got ppl wif same prob...

 

Yesterday pendek n mave go sentosa wash eyes bo chio leh.. hahaha

If you are called a guy, mesti got this feeling punya. Unless you are not a pure guy anymore that i won't know:angel:

 

k la. eh Aan, cam sihat? CONROD DA SERBIS ?! hahahaha~

Hahaha, mcm nak aje:shy: JGN TAK KELUA SUAH!!! Whakakakakakaka, ANGKARA TISSUE HIKMAT....

 

dia tgh tunggu kau tonggeng lepas tu masukkn daging conrod dia PB.

Hehehe, he's already season lah i believe...

 

sorry skit.tak dapat. lol.. blakang aku akan v forever n ever.kasi abang thai sane ah settle kuang kuang kuang..

V KAPE????:cheeky:But your position when lying down mcm dah pernah kena je. Hahaha....

 

150?like sheet lor...i just bought piston,gasket and pin bearing...all for just $39.5,not including rebore and havent install.having it rebored and install...do u think itll reach $150??BULLSHEET AH ALL THESE BIKESHOP fckknnccb..wanna kok ppl of money only...i felt like showing the receipt to bikeshop siah...fook them lah

MARAH NAMPAK!!

MARAH NAMPAK!!

 

Or you are angry when we disturb your special partner (Md Ridwan aka mrbk100)

[A-AN 07]

Arggghhhhh, petrol on reserve!!!!!!!!!!!!!!!!!!!!!

[blurchaoz]

Arggghhhhh, petrol on reserve!!!!!!!!!!!!!!!!!!!!!

 

ciggie left one stick... so how a-an?? but badanku capek...

[A-AN 07]

ciggie left one stick... so how a-an?? but badanku capek...

PETRONAS kape mlm?? Like want to proceed ah... Anything calling Macha....

[LoudnessFz]

$39.50 oni? walaowei!!!! freaking _()*$_*&&(@&^&* bike shop want to charge me for $150!!! but izzit ori piston or local 1? if ori den i rather dimyself.. my piston size is 0.50 nw.. so wat piston size should i get? n where to get? any 1 can teman me? im having that knocking sound oso.. but ive overhaul my engine.. conrod changed to new ori 1.. my engine oso start to vibrate alot more.. does that mean my block scratch? n my 2t move slowly even ive open it almost to the max.. HAIYA!! BANYK PE PROB MOTO AKU!! STRESS!!!:giddy:

Otais out dere.. i need advise plz.. thank you alot lot lot lot lot..

 

im going to somewhere near arab st there to fix my piston tomorrow...got this pakcik mechanic i met at the yamaha agent,and he seems kind...so im trying out tmrw..around after 3 o clock ah...if wanna join contact me at 92256423...oh ya its original piston btw

 

bro, which bike shop u go dok..?? u live where..??

$150 is ok 4 me coz come wif labour, piston, gasket, reboring etc etc..

anw usually normal servicing cost ard $70( if u nvr change anythin other than ur gasket)

so $150, ok pe dok..

in short, u can ride w/o prob..

anw i not otai ah..jz speaking based on my little experience..

now i wanna watch fast n furious 4 on da net k...tata

 

no way in hell would labour and gasket and reboring cost that much..labour?how much effort those opening up the block would be needed?i saw mechanics changing my cone bearing...and its a whole damn more complicated then changing piston.

gasket?gasket pat agent tak sampai 10 ketol dok!!..gasket besi lagi...and rebore cost a few bucks sia..sorry uh if im really against bikeshop..kenna chop one time liao enough..kenna chop nvm..piston seize another thing!and found out i was given local piston!and paid rm200!miserable!..damn..

 

for $150 bucks..might as well just go jb..cheaper

[mankuro]

im going to somewhere near arab st there to fix my piston tomorrow...got this pakcik mechanic i met at the yamaha agent,and he seems kind...so im trying out tmrw..around after 3 o clock ah...if wanna join contact me at 92256423...oh ya its original piston btw

 

 

 

no way in hell would labour and gasket and reboring cost that much..labour?how much effort those opening up the block would be needed?i saw mechanics changing my cone bearing...and its a whole damn more complicated then changing piston.

gasket?gasket pat agent tak sampai 10 ketol dok!!..gasket besi lagi...and rebore cost a few bucks sia..sorry uh if im really against bikeshop..kenna chop one time liao enough..kenna chop nvm..piston seize another thing!and found out i was given local piston!and paid rm200!miserable!..damn..

 

for $150 bucks..might as well just go jb..cheaper

 

bro.. hw to differentiate ori n local pistons?